Reviews Motorcycle Engine Oil

80cc Bicycle Engine Kit 26' 28' Bicycle Motor Engine Kit 2 Stroke Gas Motorized Bike Motor Kit Upgrade Silver

  • Bicycle 26 & 28 inch: Fits for most 26″ or 28′ wheeled bikes with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″).
  • 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)

  • VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine.
  • Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit.
  • For use with fine grinding paste (not included).
  • PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle.
  • Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant.
  • FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
  • Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
  • EASY TO USE: Clean all carbon deposits off valve and valve guide.
Check Stock

SUNROAD 50cc Bicycle Engine Kit 26' 28' 2-Stroke Motorized Motor Bike Kit for Mountain and Road Bike Cycle Motor Kit Black

  • This 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike, you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter..
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

TCT-MT ABS Oil Drain Pan w/Spout Low Profile Fit for Harley Davidson Models 1984-2020 Road Glide FLTRX, Road King FLHR, Iron 883 XL883N, Heritage Classic FLHC, CVO Tri Glide FLHTCUTGSE

  • 【FITMENTS】Fit for Harley Davidson Models 1984-2020. Please check the description for FITMENT details!.
  • 【FEATURES】This oil drain pan is ideal for home garage use or professional auto shop use. The oil drain pan's capacity allows user to drain multiple engines before having to empty for recycling or waste. Low profile design for easy maneuverability..
  • 【FEATURES】Reduce the mess and cleanup required when changing the fluids on your motorcycle.
  • This reusable Drain Pan is designed specifically for use with low vehicles.
  • Low-profile design fits easily under standard height and lowered motorcycles, and slips beneath the bike even when on the side stand..
  • 【FEATURES】Will capture two engine oil changes or the complete drain fluids (engine oil, primary and transmission) from one motorcycle.
  • Large enough to catch the oil from the entire length of the primary, and is sized to hold and drain an inverted primary cover.
  • Convenient carrying handle simplifies transport..
  • 【PACKAGE INCLUDED】1x Oil Drain Pan. *Material: ABS.
Check Stock

KIMISS Towing Hitch Engine Oil Coolers & Kits, Motorcycle Engine Oil Cooler Oil Cooling Radiator Kit for Honda CB CG 100CC-250CC(85ML-Silver)

  • 【Required accessories】Whether you're using a top-down corner engraving or pulling down a tow, your high speed requires a reliable and efficient cooling system..
  • 【Minimal pressure loss】With minimal pressure loss, the kit uses a large oil drain cooler mounted in the front grille for optimum airflow and cooling..
  • 【Funtion】Cooling the engine temperature keeps the engine within normal operating temperature range, reducing engine load and extending its life..
  • 【Two choices】Invisible black and stylish silver cooler options include pre-assembled stainless steel cords and special mounting brackets for a painless, clean installation..
  • 【Fitment】Motorcycle Oil Cooler System Kit, Fit for Honda GY6 100CC-150CC Engine. Transmission Cooler Mounting Kit Oil Cooler Lines.
Check Stock

Red Line 90226 Powersport Motor Oil V-Twin 20W50 Powerpack Kit

  • Complete kit for motorcycles equipped with Evolution, Milwaukee-Eight and Twin-Cam engines*.
  • 2007-up H-D motorcycle with the 96-inch and larger Twin Cam engines, users must purchase one extra bottle of Primary Chain Case Oil to meet this engine’s 38 oz (45 oz dry) capacity, compared to the 32 oz wet capacity of a Milwaukee-Eight, Evolution or V-Twin case.
  • Includes 5 quarts of 20W50 Motorcycle Oil, 1 quart of V-Twin Transmission Oil with ShockProof, 1 quart of Primary Chain Case Oil, 1 bottle of Fuel Injection Cleaner for Powersports, a sticker kit, a Red Line Oil embroidered hat and a versatile funnel.
  • Each kit has been tested for compatibility and includes enough fluids for a complete oil change*.
  • Users must check vehicle specifications for capacity to ensure against overfilling, as full quarts may provide more product than necessary.
Check Stock

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • ... blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disassemble the oil pressure sensor first, then screw on the oil pressure gauge, start the vehicle to operate it at a specified speed, the reading in the pressure gauge is the oil pressure of lubrication system. Please refer to equipment manufacturer's operation instruction and compare to the manufacturer's recommended readings.
  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with retu....
Check Stock

MaximaHiflofiltro VTEOCK13 Full Synthetic Engine Oil Change Kit for Harley Davidson Twin Cam V-Twin - 4 Quart

  • Fits: Harley Davidson All Twin Cam Motorcycles (Electra Glide/Ultra, Street Glide, Road King, Softail, Dyna) 2000-2015.
  • The V-Twin Engine Oil Change Kit includes 4 Quarts of Maxima V-Twin Full Synthetic 20w50 Engine Oil and a Chrome HiFloFiltro HF171C Premium Oil Filter.
  • Maxima V-Twin Full Synthetic is an ester based full synthetic motorcycle oil engineered to lower operating temperatures, reduce wear, increase film....
  • Features a regenerative polymer system to resist mechanical shearing and heat breakdown for exceptional viscosity retention, with the Ultra-clean....
  • HiFloFiltro Oil Filters are constructed using the worlds highest quality materials available, with test results proving a 28percent longer service....
Check Stock

PEXMOR 50cc Bicycle Engine Kit, 2-Stroke Petrol Gas Motor Engine Set, Motorized Bike Cycle Complete Engine Refit Kit, Super Fuel-efficient for 26' 28' Bicycle (50cc (Silver))

  • 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock