Reviews Motor Test System

Yose Power Waterproof 26Inch 500W Ebike Conversion Kit with 48V 13Ah Battery for Cassette 26" Electric Bike Rear Wheel, Electric Bicycle Hub Motor Kit, LED Display, Installation Tool

  • 【Technical information】500W rear motor for cassette wheel with 48V 13Ah battery. Max speed: 40km/h. Max torque: 67N.m. Thumb throttle: 6km/h. Waterproof motor, PAS sensor and 4 in 1 cable..
  • 【Test and Quality】BMS system, prevents overcharging, overdischarging, overcurrent and short circuit. After we simulate daily use, our battery can still have 78% capacity remaining after 1000 times cycles. Our engineering test battery has worked on our electric bikes for more than five years..
  • 【Installation Tools and Instructions】 The kit comes with installation tools such as Allen wrench and installation instructions. If you need an installation video, you can contact us at any time, and we will send you the installation video..
Check Stock

Straight Shank Tool Holder, 45-46HRC Hardness 1-7mm Clamping Range 40Cr and Carbon Steel CNC Milling Extension Rod for Lathe Device(C16-ER11A-100L)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

ANCEL PB100 Automotive 12/24V Power Circuit Tester Probe with ANCEL BA201 Car 12V 100-2000 CCA Battery Load Tester

  • ...or reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
  • Easy to check the cranking and charging system condition. Cranking test displays cranking time, voltage and status, which helps you test and analyze the starting motor to check it works properly or not. Charging test displays load voltage, unloaded voltage, ripple status, charging system status to avoid damaging the battery and shortening its life greatly due to overcharging or incomplete charging..
  • Monitors the real-time voltage through the Waveform graph, displays current voltage, maximum and minimum voltage during ignition. According to analyze the values of discharge voltage, starting voltage, and charging voltage, you’ll know if the battery needs to be replaced or not..
Check Stock

6.5HP 4 Stroke Outboard Motor Heavy Duty Short Shaft Outboard Boat Engine Trolling Motor with Water Cooling CDI System for Inflatable Fishing Boat Kayak Canoe

  • 【6.5 HP 4 Stroke Outboard Motor】- The 6.5 hp 4-stroke outboard motor provides all the power you need for motoring in a small craft. This engine....
  • 【Note】- Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair it. To will avoid cylinder....
  • 【Wide Applications】- The outboard motor is great for small yachts, inflatable boats, sailboats and fishing boats or used as an auxiliary trolling....
  • 【Warm Tips】- 1. About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the....
  • 【Superior Performance】- 6.5 HP 4 Stroke Outboard Motor, superior engine water cooling CDI system to improve the reliability of the whole machine.....
Check Stock

Mechanical Tool Aluminum Alloy Synchronous Wheel XL Type 25 Teeth Power Transmission Accessories for Milling Machine for Drilling Machine for CNC Engine Lathe(25 Teeth 5mm Hole XL synchronous Wheel)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

Autel PowerScan PS100 Power Circuit Probe Kit with 40ft Cable, 12V 24V Automotive Circuit Tester, Car Electrical Diagnostic Tool, AC DC Resistance Voltage, Short Finder, Continuity/Probe/Signal Test

  • 【2023 ALL-IN-ONE POWER CIRCUIT TESTER KIT---ACCURATELY】Autel PowerScan PS100 is most accurate power circuit probe tester yet, with 160x128 TFT display test all 6-30 volt vehicle electrical systems. Autel PS100 supports voltage&polarity test, continuity test, signal circuit test, components activate, check bad grounding, locate short circuits, circuit breaker protection, etc. Intuitive interface with ergonomic design makes PS100 be best gift for all novice drivers or pro circuit repairers..
  • 【FOUR WORKING MODE---INTUITIVE&EASY】Four working modes make circuit detection more simple:DC Voltage, AC Voltage, Resistance, Tone On/ Off. DC Voltage mode can read DC voltage with 0.1V resolution.
  • AC Voltage can read Max & Min voltage, frequency and duty cycle quickly.
  • Resistance mode can read resistance between tip and auxiliary ground wire. Unique Tone On/Off Design is really useful when working in bright areas, it can judge the circuit voltage according to the volume of the sound..
  • 【COMPONENT ACTIVATION】The component activation feature is specially designed to troubleshoot on/ off-board electrical equipment. By activating the signal generated by th....
Check Stock

Checkered Flag Joey Logano Shell-Pennzoil Competition #22 T-Shirt Black 2X-Large

  • Made from Pennzoil's patented gas-to-liquid PurePlus Technology combined with a high-performance additive system for complete protection.
  • Nothing keeps your engine closer to factory clean (based on Sequence VH and M-111 sludge test using SAE 0W-40).
  • No other leading motor oil provides better protection from friction (based on Sequence IVA wear test using SAE 0W-40).
  • Provides better fuel economy (meets the requirements of MB 229.5 which includes Fuel Economy Improvement (FEI) requirement as determined in industry....
  • Formulated to deliver faster low-temperature oil flow and protection in extreme heat.
Check Stock

ANCEL PB100 Automotive 12/24V Power Circuit Tester Probe with ANCEL BA301 6V 12V Battery Load Tester Car Cranking Charging System Test Tool

  • ...de mode for checking forward bias or reverse bias..
  • Works on all 6V & 12V 100 - 2000 CCA lead-acid batteries, analyzes starter cranking and alternator charging condition. Cranking test to test and analyze the starting motor (cranking time, voltage, and status), and the charging test to check and analyze the charging system (load voltage, unloaded voltage, ripple status, charging system status)..
  • Features one-click "waveform" to record the voltage changes (current voltage, maximum and minimum voltage) in a graph during ignition. You'll know if the battery needs to be replaced or not through analyzing the values of discharge voltage, starting voltage, and charging voltage..
Check Stock

ANCHEER Folding Electric Bike Electric Bicycle E-Bike 350W Powerful Motor Waterproof Ebike with 15 Mile Range, APP Speed Setting (White)

  • 350W POWERFUL MOTOR: ANCHEER folding electric bike is equipped with a 350W high speed motor achieving top speed of 15-17 MPH, powered by 36V battery, with a range of 15 mile means your e-bike commute just easier..
  • LIGHTWEIGHT FOLDING FRAME: This e-bike is easy to fold and save more space for storage. It weighs a mere 36lbs, easy to carry with one hand. Provided with Both good anti-pressure ability and lightweight frame..
  • FASHION DESIGN& GOOD QUALITY: This ebike inspired by the shape of dolphins, has super cute and smart design. IPX5 Waterproof range protects your trip on rainy days. It also adopts innovative aluminum alloy frame, double layer aluminum alloy wheel..
  • APP SUPPORTTING SYSTEM: This foldable electric Bicycle has Bluetooth System (above Android 4.3/IOS 8).
  • Motor locking (original password 123456).
  • E Bike self-test means you can quickly detect the fault of the electric bicycle. It also has cruise control, get the certain speed and no need to twist the throttle all the time..
  • EASY TO ASSEMBLY: ANCHEER electric bicycle are shipped 85% assembled. Step-by-step instructions and detailed assembly videos are available for you in assembly..
Check Stock