KuangBBBTools 45-5 mfd Round Air Conditioner Capacitor Motor Run Capacitor Withstand Voltage 450V AC Compatible for c3455r GE 97F9895 Z97F995 97F9895BZ3 27L88

  • Professional design for replacement of single or three phase motor capacitors, especicaly for air conditioner or refrigerator.
  • Dural run capacitor 45+5 mfd uf, 450v withstand voltage,50/60 Hz,Polypropylene Metallized Film and vegetable oil filled.
  • 1/4 in.standard Quadruple QCT terminals, 4 terminals per post, for fast repairing and replacment.
  • Built to the toughest standards for AC motor run capacitors including EIA-456-A and IEC 60252-1:2001.
  • Compactible for 97F9895 , Z97F995 , 97F9895BZ3 , 27L880 , TRCD455 , TRCFD455 , PRCFD455 , 27L889 , 97F9851 , 97F9851S , 12788 , RC0114 , Z97F9895 ,....
Check Stock

Straight Shank Tool Holder, 45-46HRC Hardness 1-7mm Clamping Range 40Cr and Carbon Steel CNC Milling Extension Rod for Lathe Device(C16-ER11A-150L)

  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Supports automatic operation including dry running and singlestep running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
Check Stock

MaySpare 12V Power Trim Solenoid Switch For Mercury Mariner Outboard Motors 35-275 HP 89-846070 89-94318 MerCruiser 89-96158T

  • 12VDC with 4 Terminal/ Flat Bracket with 1 / 4-20 threaded motor and battery terminals and 8 - 32 grounded and grounded screw terminals.
  • Replace Part Number: 89-846070 89-94318 89-96158T 89-846070, 89-94318, 89-96158, 89-96158T, 89846070.
  • Coil Roll is using 180℃ copper wire, Robust plastic Shell is More durable and upgrade heat resistance performance.
  • Wide Use on variety of Mercury and Mariner outboards and MerCruiser stern drives..
  • 100% high quality & Oem Match, direct replacement,6 Month Warranty/ Free Return and Exchang, Full Refund.
Check Stock

Carrier / Bryant / Payne HC98JA041 Replacement - 40 + 5 uf / Mfd 370 / 440 VAC AmRad Round Dual Universal Capacitor Made in the U.S.A.

  • 370-440 v, 40+5 uf, 50/60Hz, Polypropylene Metallized Film and vegetable oil filled Dual Run capacitor, no PCBs.
  • Round Dual Run Capacitor Dimensions: 2.08 inch diameter, 5.7 inch total height.
  • Heavy duty aluminum casing with steel cap. 10,000 AFC Protected.
  • 1/4 in. Quadruple QCT terminals, 4 terminals per post.
  • Designed for replacement of OEM single and three phase motor capacitors. No hassle 5 Year Warranty..
Check Stock

Genie Motor Starting Capacitor 18004-B 220VAC Genie Starting Capacitor 18004B

  • Production Name:Motor Start Capacitor, Volume: 53-64 MFD, Withstand Voltage: 250V AC 50/60 Hz, Shape: Round.
  • US style and professinal start capacitor for single phase motor, no PCBs inisde.
  • OverView Size: 1-7/16 x 2-3/4 in(37x70mm),Dia*Height.
  • Housed in a rugged phenolic resin case and strong body,PCB free.
  • Each pole has 2 pcs quick dsconnect terminals, convient for fast replacement.
Check Stock

2 American Bass SL-104 10" 600 Watt Shallow Slim Car Subwoofers 4-ohm Subs SL104

  • 350W RMS/700W peak power Dual 4 ohm voice coils 50 oz. Magnet w/100 oz. Motor structure.
  • Oversized double stitched butyl rubber Surround 2" 4-layer voice coils chrome plated spring loaded terminals.
  • Heat pump, intercooled motor cooling system jet Black carbon mica injection molded cone. 5.6" mounting depth.
Check Stock

Iztor Universal 6 Way Blade Fuse Holder Box With Spade Terminals and fuse,5PCS 4Pin 12V 40A relays for car truck trailer and boat

  • 6-way fuse box 6-relay holder with spade terminals and 6pcs fuse, 5PCS 4Pin 12V 40A relays.
  • Suitable for all marine, motor-home, automotive & motorsport applications..
  • Waterproof connector.Can be installed in circuit..
  • Can be fixed through 2 pre moulded holes on side..
  • Package Includes:1 Piece Relay Holder Box and 41 Pieces Pins terminals..
Check Stock

(2) Rockville Destroyer 12D1 12″ Competition Subwoofers+Vented Sub Box Enclosure

  • Package Includes: (2) RockvilIe 12″ Competition Car Audio Subwoofer. (1) RockvilIe Dual 12″ Vented w/Divided Chambers 2.0 Cu Ft/Side Sub Enclosure. 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 20 Feet of 14 AWG Blue Speaker Wire. 4 Spade Terminals. Features of DESTROYER 12D1: RockvilIe DESTROYER 12D1 12″ Dual 1-Ohm Car Subwoofer. Peak Power Handling: 8000 Watts. Program Power Handling: 4000 Watts. CEA Rated RMS Power Handling: 2000 Watts.
  • Voice Coils are made in the USA! 3 4-Layer Black Aluminum Voice Coils Wound with Aluminum Wire. USA Voice Coils are hands down The Best in the world. The voice coils are rated to withstand high temperatures of 300-350C Triple-Stacked 300 Oz Y35 Magnets. (Y35 is the best grade and they will perform better than most 400 oz magnets).
  • 1-Piece Chrome T-Yoke with Stamped Logo (1 piece t-yokes magnetize better and makes excursion (xmax) better as well as increases the BL rating. BL is basically how much power you get out of the motor and is one of the most important ratings. We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated. Cast Aluminum Basket With Black Sanded Finish....
Check Stock

Straight Shank Tool Holder, 45-46HRC Hardness 1-7mm Clamping Range 40Cr and Carbon Steel CNC Milling Extension Rod for Lathe Device(C16-ER11A-100L)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock