Reviews Motor Controller Breakout Board

S-Union Ethereum ETH ZEC Mining Power Supply 12V GPU/PSU Breakout Board + 12pcs 16AWG PCI-E 6Pin to 6+2Pin Cables 27.5Inch Length 70CM with 5 Nylon Cable Ties

【Item】GPU Mining Power Supply Breakout Board and PCI-E 6Pin to 6+2Pin (Male to Male) cable.
【Performance】Measured maximum can support to 1600W power supply, 12 groups of graphics card 6pin output.
【Safety】The Breakout Board have Solid state capacitor filter, suitable for a variety of server power supply. The line is 16 AWG wire，Able to....
【Compatibility】This item is Compatible with GPU Mining Power Supply -HP 1200W/750W PSU. Such as DPS-1200FB DPS-1200QB PS-2751-5Q HSTSN-PL12....
【What You Get And Shipping】1x Power Supply Unit Breakout Board & 12x PCI-E 6Pin to 6+2Pin Cables & 5x Nylon Cable Ties. SHIPPED FROM THE U.S.....

Application: This breakout HAT board, which is specially customized for Raspberry Pi Pico..
Convenient: Solve the problem that the Raspberry Pi Pico silk screen is covered, and providing pin header pins, which is convenient for users to build their own DIY circuits..
Features: Support Raspberry Pi HAT board with 40Pin Pin Header.
For example: GeeekPi DockerPi series HAT board, 4-channel relay HAT board, SensorHub board, etc. It Provides a good bearing platform.
Package Includes: 1 x Breakout HAT Board For Raspberry Pi Pico.

PREMIUM QUALITY MATERIAL ENSURES LONG TERM SERVICE--This USB Breakout Board is made of 100% brand new and high quality material ensures longer use.
USB TYPE A FEMALE BREAKOUT BOARD--Standard USB type A female socket.
4 PINS USB A BREAKBOARD BOARD--With 4 pins including VBUS, D+, D- and GND.
IDEAL TOOL FOR USB POWER SUPPLY AND BREADBOARD DESIGN--Great for DIY USB power supply, breadboard design, etc.

Easy to solder:The upgraded USB-C breakthrough board has powerful power,three times the power as much as previous USB. Easy to integrate the USB-C connector into your project without soldering every tiny SMD pad,Easy to solder to the through-board terminals.
Simple and sturdy construction:The USB-C breakthrough board can be reversible.That can easily solve the general frustrating problem of USB cables.The USB breakthrough board can adds resistance to the original foundation.
Convert efficiently:The USB Type-C Breakout Board contain VBUS, GND, CC1, CC2, D+ and D- pins,In total of 6 USB-C connector that can be connect 0.1" pitch connector.Worked perfectly, The board can provide up to 1.5A nominal power and up to 3A power.Depending on the upstream equipment.Can definitely be used to convert keyboards to USB-C Detachable.
Apply for:The USB Type-C board can be used to replace the charging port on the astro a50 headset.PCBs quality and the contacts soldered with ease.Used these to convert an old hardwired keyboard to removable usb-c. Worked perfectly.
Package content:5pcs High quality USB Type-C Breakout Boards+5pcs pin connector.

Fine quality - Made with high quality circuit board which ensures a longer service life.and this simple and easy-to-use DC motor speed controller has an stable performance..
Product introduction - The motor speed controller uses screw terminals for convenient and quick wiring. It is equipped with an instantaneous start/stop switch and a speed control potentiometer..
Seller's warm tips - 1. The digital display is the percentage non-motor actual speed.
2. The input voltage must be divided into positive and negative, can not input 220V household electricity, the input voltage should be equal to the rated voltage of the motor (6-60V), such as the rated voltage of the motor 12 input 12V motor 36V input 36V motor..
Speed Controller Features - Comes with a momentary start/stop switch and a speed control potentiometer..
After-sales service guarantee - Acogedor is more than just a brand. If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..

This breakout board is specially made for Raspberry Pi pico.
The gold-plated surface can prevent oxidation, high-quality gold-plated surface, easy to weld.
All holes have been electroplated to increase the strength..
The breakout board is equipped with Raspberry Pi pico, which is convenient for users to develop and integrate flexibly.
The package does not include the Raspberry Pi pico, you need to configure it yourself..

【Introduction】- The breakout board uses WS2812S chip, used for 5050 LED..
【Support】- This WS2812 Breakout Board supports high brightness and RGB color..
【Can Connect a Lot of Lights】- Built in chip, it can connect a lot of lights in series..
【Operation】- After connection in series, each light can control color independently..
【Power Supply】- No matter for how much lights, it only need one control cable and two power cables..

The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.

This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module..
Software: GRBL controller, UniversalGcodeSender..
Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")..
Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..