Reviews Motherboard For Ethereum Mining

PCI-E Riser Express Cable 16X to 1X with 4pin Power Graphics Extension Ethereum ETH BTC Mining Powered Riser Adapter Card+60cm USB 3.0 Cable (4P)

  • PCI-E riser 4Pin molex,gold plated contacts for better connectivity and long life,and with side clip to fasten other card. No driver needed,slot with a fixed buckle, easy to remove the card and fi,xed , so that the card will not fall off from the slot.The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment..
  • 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Wire is relatively soft, easy alignment, easy to install in the main box..
  • PCI-E with multi-layer shielded wire, the longest can be connected to 3 Meter and will not attenuate the signal.PCI-E plug all gold-plated, more wear and increase the conductivity.PCI-E riser 4pin,gold plated contacts for better connectivity and long life,and with side clip to fasten other card..
  • Transfer card with SATA 15PIN interface to enhance power supply, so that the card from the motherboard independent of the board, so as to reduce the burden on the motherboard to accept the card..
  • Compatible with 1x,4x,8x,16x PCI-E slot of the motherboard,dedicated for bitcoin mining..
  • Note:If you have any questions,please contact us asap,and we will try our best to help you.
Check Stock

N N.ORANIE 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card and 60cm USB 3.0 Cable

  • ...nnector Inserted Reversely, May Damage the Connected GPUs or PCIE Slots..
  • 【3 POWER SUPPLY METHODS】3 power supply methods are used: SATA power interface, 6Pin power interface, and 4-pin interface power supply.Multiple power supply methods solve the problem of power mismatch. Reduces the power supply burden on the motherboard and can be freely selected according to the actual usage environment.(Please reserve 10W power supply for riser when configuring power supply).
  • 【REDUCE MOTHERBOARD BURDEN】6-PIN PCI-E power to 15-PIN SATA power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compatibility with your power supply. PCIE slot uses gold plated pins to enhance the stability of data transmission and effectively reduce electromagnetic signal interference..
  • 【Stable solution】The 60cm USB 3.0 extension cable is soft and flexible, making it simple to position and route. The operating state is shown by three LED lights. The slot has a fixed buckle that makes it easy to remove and replace the graphics card without it falling out..
Check Stock

BTBcoin PCI-E Riser 009S GPU Riser Adapter Card PCIE X1 to X16 Extender PCI-Express Riser Cable for Bitcoin Litecoin ETH Coin Mining - 6 Pack

  • UPGRADED RISERS: The 009S version Pcie risers are the solution that most crypto miners select for setting up Ethereum/Bitcoin/Litecoin and other GPU mining rigs. Adopting gold plated contacts to ensure flawless connectivity and long lifespan..
  • MORE STABLE: Features 4 high quality black solid capacitors to make the power deliver from graphics card more stable and secure..
  • REDUCE MOTHERBOARD BURDEN: With two 6 PIN interfaces (directing differently) and one 4 PIN interface to enhance power delivery, providing independent power for graphic card and greatly reduce motherboard burden when using multiple graphic cards..
  • THOUGHTFUL DESIGN: 60cm USB 3.0 extension cable is soft and easy to place and route. 3 LED lights display working state. Features a fixed buckle on slot, easy to remove and fix graphics card so that the card will not fall off from the slot..
  • WIDELY APPLICATIONS: This GPU risers kit is compatible with 1x, 4x, 8x, 16x PCI-E slot of the motherboard. Suitable for all WINDOWS, LINUX and MAC systems. Buy with 30 days warranty..
Check Stock

MLLIQUEA 8 GPU Ports Mining Rig, Crypto Complete Mining Frame Machine with 2500W Mining Power Supply, Barebone B75 Motherboard for ETH with 8 Cooling Fans, Miner Frame Case with PSU, RAM, SSD

  • 8 GPU Ports - The mining rig come with 8 GPU interfaces, the GPU interface spacing is 65mm. 8 GPUs can be installed on the motherboard at the same time. Compatible with AMD/NVIDIA GPUs..
  • 2500W PSU - Our EHT miner is equipped with a 2500W professional Low Decibel mining power supply (176V to 264V), with ultra-high work efficiency, and is equipped with multiple power protections..
  • Complete Mining Rig- Include 2500W PSU, B75 MB, CPU G2030, 128G SSD, 4G RAM, eight 4500 rpm fans, 8 pin cables, and screws. Compatible with Windows or OS, but need to install the system yourself..
  • Upgrade Material - MLLIQUEA mining GPU frame case is made of high-quality steel, which is sturdy and durable. Can fully protect your GPU and electronic equipment from damage and saves your use cost..
  • Effective Heat Dissipation - Upgraded version of the 8 fans with adjustable speed (2500rpm-4500rpm). If you feel that the fan is very noisy at work, you can adjust the fan speed regulator to reduce the rotation speed and reduce the noise. Low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum, and any other cryptocurrency..
  • Excellent Customer Service - Please read the manual before use. If you are not completely satisfied with your purc....
Check Stock

Dracaena 2 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status + 60cm USB 3.0 Cable(GPU Ethereum Mining)

  • Mainly designed for GPU Mining (Ethereum) rigs..
  • 60cm USB 3.0 extension cable for flexible Graphic card connectivity.
  • Extend PCI Express X1 slot from motherboard to PCI Express X16 slot.
  • Power Supply Options: PCIe 6pin, Molex, SATA.
  • 3 Solid Capacitors improve power stability to GPU and prevent interference. Coil unit added for absorbing electromagnetic wave.
Check Stock

ACTIMED PCI-E Splitter 1 to 4 PCI Express USB Port Riser Card / PCIE X1, X4, X8, X16 Slots GPU Riser / USB 3.0 Adapter Multiplier Card / Upgraded Cooler / for Bitcoin Mining Miner

  • 【Excellent Scalability】ACTIMED PCIE Splitter 1 to 4 USB PCI Express port riser card effectively solves the problem of insufficient PCI-E ports on motherboard.We recommend using with the (ASIN: B09FLN7G7X, B09JVPGB5Q) PCIE riser for perfect compatibility with your graphics card..
  • 【Component Compatibility】PCI-E X1 to 4 USB adapter compatible with a wide range of computer systems, Plug and Play, System Support: Win7 / Win8 / Win10 / Win XP / DOS / Linux. Supports PCIE 1X / 4X / 8X / 16X slots. Note: Please disconnect the power to the motherboard during installation..
  • 【Double chip protection】Use 4R7 power control chip and ASM 1184E device control chip. Double protection for your bitcoin prospector and more stable and secure connection to gpu riser..
  • 【Advanced Power Supply and Cooling Solutions】Our PCIE expansion cards are powered directly through the PCI-E interface, so no external power cable is required and the adapter power supply is free from external interference. The improved and enlarged heat sink keeps your features safe by keeping the temperature stable when the device is running at maximum power..
  • 【UFUNIN Customer Service】 ACTIMED PCIe Splitter 1 to 4USB PCI-E card is the latest and most advanced solution for building GPU mining....
Check Stock

ACTIMED PCIE Riser 1X to 16X GPU Riser (6PIN/MOLEX/SATA Powered) 10 Capacitors, PCI Express Risers Adapter Card for BTC/ETH/GPU Mining Rigs, with 60cm USB 3.0 Cable and LGB-7 Color Lights, 6 Pack

  • 【Making Mining Easy】The ACTIMED PCIE Riser provides the perfect solution for connecting multiple GPUs to your motherboard's PCIE slots, extend the mother board PCIE X1 slot to PCIE X16 slot. Will provide a safe and reliable connectivity with more PCIE X16 graphic cards. Will be mainly used on BTC Ethereum Mining rigs or GPU Mining rigs..
  • 【10 High-quality solid capacitors】10 FP independent solid capacitors are customized for the graphics card power supply. Compared with the general 4-8 capacitors, the graphics card power supply can be more stable and safe. effectively solving the problem of insufficient power supply capacity.Build in electric circuit protector keep device away from over current, over heat and over voltage..
  • 【3 power supply methods】3 power supply methods are used: SATA power interface, 6Pin power interface, and 4-pin interface power supply.Multiple power supply methods solve the problem of power mismatch. Reduces the power supply burden on the motherboard and can be freely selected according to the actual usage environment.(Please reserve 10W power supply for riser when configuring power supply).
Check Stock

Miertou VER010S-Plus High Power PCI-E Riser 16x to 1x for Bitcoin ETH Coin Mining,Powered Riser Adapter Card, 4 Solid Capacitors,GPU Crypto Currency Mining Cable with USB Power Cable,with LED

  • Miertou VER010S high-performance PCI-E express riser can extend the motherboard PCIEX1 slot to PCIEX16 slot. Will provide a safe and reliable connection with more PCIEX16 graphics cards. It will be mainly used for Ethereum mining rigs or GPU mining rigs..
  • The graphics card power supply adopts 8X solid capacitors to make the graphics card power supply more stable and safer. The extension cable with 6-pin port enhances the power supply and completely solves the problem of insufficient power supply capacity and cable burning..
  • The slot fixing bracket is designed to remove and set up the graphics card. The card will not fall off from the slot. It can be converted into a SATA port and a SATA to 6pin line, so that the power supply of the graphics card is independent of the motherboard..
  • 60cm USB3.0 cable, very soft, easy to place and route. Cables with built-in shielding nets are more stable. PCI-E1x to 16x power riser adapter card with multi-layer shielded cable will not weaken the signal within 3 meters..
  • After-sales service: If you have any questions, please feel free to contact us! , we will reply to you within 24h!.
Check Stock

PXY-ELEC Complete 8GPU Mining rig System. B85 Full Mining Machine Includes Mining Motherboard ,CPU,(256) SSD,(8) RAM and PSU.Used for Build GPU Frame Mining rig ETH Miner(Without GPU)

  • B85 miner is a standalone mining system that supports AMD/NVDIA GPUs . Including: mining machine motherboard, Intel CPU 1840/1820 (with CPU cooler), SSD (256GB), RAM (8G), PSU (1800w), 4 fans (silent), single metal frame, only need to prepare graphics card and monitor , mouse, keyboard run.
  • B85 rack-mounted mining machine, professional silent design, accelerated air convection, excellent heat dissipation design. Noise: 26.65 (dB-A) or lower, [1800w silent power supply]: The power input voltage is AV 110-230V, and the power conversion efficiency is as high as 92%, allowing you to enjoy the fun of electricity while mining..
  • The B85 rack-mounted miner is made of steel and iron, and the length of the graphics card is not limited. If you have purchased multiple miners of the same model, the B85 can be equipped with an additional layer (with support columns).more space-saving and organized. It is recommended not to exceed 4 layers.
  • The GPU interface spacing is about 65mm, enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency such as Bitcoin (BTC) and Ethereum (ETC), but also please note that the width of your GPU should not exceed 65MM, otherwise Cannot install 8 GPUs.
  • B85 miner 128GB SSD pre-installed with Windo....
Check Stock