Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs
- FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
- EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
- IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
- QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
- MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check StockSundown Audio SCV Series Amplifier (SCV-2000D | Monoblock | 2000W)
- Input Sensitivity ( =/- 5% ): 6 - 0.2 Volts.
- Dimensions: 16.53" L x 8.25" W x 2.32" H.
Check StockCRUNCH 2X325@4OHMS,1X1500WATTS@4OHMS BRI
- 1 channel x 1,500 watts (mono bridged) @ 4 ohms.
- Operates in stereo, bridged mono, or stereo/bridged mono simultaneously.
- Variable electronic crossover: 12 dB per octave.
Check StockCRUNCH 2X500@4OHMS,1X2000WATTS@4OHMS BRI
- 1 channel x 2,000 watts (mono bridged) @ 4 ohms.
- Operates in stereo, bridged mono, or stereo/bridged mono simultaneously.
- Variable electronic crossover: 12 dB per octave.
Check StockCRUNCH 4X250@4OHMS,2X1000WATTS@4OHMS BRI
- 2 channels x 1,000 watts (mono bridged) @ 4 ohms.
- Operates in 4-channel stereo, dual stereo bridged, stereo + bridged mono, or dual bridged mono.
- Variable electronic crossover: 12 dB per octave.
Check StockCRUNCH 2X250@4OHMS,2X500@2OHMS,
- 1 channel x 1,000 watts (mono bridged) @ 4 ohms.
- Operates in stereo, bridged mono, or stereo/bridged mono simultaneously.
- Variable electronic crossover: 12 dB per octave.
Check StockART MX225 5-Channel Zone Distribution Mixer
- Left and right balanced Source 1 and 2 Inputs, accepts stereo or mono signal sources.
- Source 1 and 2 input channels are internally routed to all five Zone channels.
- 5 Zone channels each feature Source 1 and 2 level controls and left and right balanced output XLRs.
- Stereo/Mono selector on each zone sums left and right into Mono mode when engaged.
Check StockQuantum
- X-Over Slope: 12dB | Bass Boost @ 45Hz | Input Sensitivity: 285Mv – 6V.
- Signal to Noise Ratio >90dB | THD at Rated Power .
Check Stock