Reviews Mono Amplifiers

American Bass PH-2500.1-MD-V2 Class D Digital Power Car Amplifier

Professional 31-band stereo graphic equalizer for live and studio applications.
Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer.
Ultra-low noise 4580 operational amplifiers for highest signal integrity.
Dedicated mono subwoofer output with adjustable crossover frequency.
Additional sweepable high and low-cut filters for each channel remove unwanted frequencies, e.g. floor rumble, hiss etc..

Features: class-a/B 2-ohm stable 2-channel amplifier. Rms power rating: 4 ohms: 50 watts x 2 channel | 2 ohms: 70 watts x 2 channel | 1 ohm: ------------n/a------------ | bridged, 4 ohms: 140 watts x 1 channel | total power output: 600 watts. Pulse width modulated MOSFET power supply, LED power (green) and protect (red) indicators, soft start turn-on, 2 or mono channel operation, 1 pair of preamp outputs to connect multiple amplifiers, 3-way protection circuitry (Thermal, overload, and speaker short p.

CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving....
BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics....
MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant....
HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded....
CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the....

ADD SUBWOOFERS: Works with high power car stereos (up to 80 watts per channel) to add subwoofer systems to any car stereo..
EASY TO INSTALL: Provides amplifier remote turn on output without removing car stereo..
OUTPUT CONVERSION: Converts car stereo speaker wire outputs to RCA Cable outputs..
ADDITIONAL CHANNEL: Allows the addition of 2-channel or mono amplifiers to factory or aftermarket stereos..
CONTROLLER: Includes mountable remote control with knob for adjusting subwoofer bass audio level from the dash..
REQUIRED FOR USE: You must have an aftermarket amplifier in order to use this product..

10-inch subwoofer pre-loaded into a sealed, custom-fit enclosure.
Designed to be pressure fit under the front passenger’s seat rails, no mounting hardware is required.
Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction.
OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness.
The 300W RMS/900W max power rating is a match for the KTA-30MW Mono Tough Power Pack Amplifiers (sold separately).

Bundle includes: Alpine S-DB8V-TRK Dual 8” Alpine Halo S-Series Truck Subwoofer Enclosure, Alpine S-A60M Mono Digital Subwoofer Amplifier - 600 Watts x 1 @ 2-Ohms & 330 Watts x 1 @ 4-Ohms, Alpine RUX-KNOB.2 Remote Bass Knob.
S-DB8V-TRK - These enclosures were designed to fit under the back seat of most full-size trucks. Two 8” subwoofers are preloaded into the compact enclosure and linked with a ProLink bracket that can be adjusted from 40” to 51” for a wide range of applications..
S-DB8V-TRK - Integrated Amp Tray – Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine Mono-Power Amplifiers (sold separately)..
S-A60M - Power output 2-Ohm @ 14.4 Volts: 600 W RMS X 1, Power output 4-Ohm @ 14.4 Volts: 330 W RMS X 1.

The BXX1200.1D is a 1200 watt mono amplifier featuring Super Class D technology with an NGSD digital chip to provide you with an extremely efficient,....
The rock solid Ultra-Fi MOSFET outputs are selected for both balance and output power. This keeps power smooth even during demanding peak in the....
The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the....
Max Power Rating: 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. 1 ohm: 1200 watts x 1 chan..
Dimensions: 9"W x 13.25"L x 2.5"H, 1-year Manufacturer's Warranty.

【TRS Special Design】The guitar amp cord uses TRS technology, which is compatible with mono, balanced and stereo signals as well as with TS signals, compared to TS which can only be used for mono and unbalanced signals..
【Widely Applicable】This trs cable 1/4 is suitable for mixers, amplifiers, microphones, effects, decoders, equalizers, electronic organs, pedals, amplifier jacks, electric guitars, electric basses and other electronic instruments..
【Your Better Choice-90°】If your guitar's socket is open on the side or open on the tail peg area, then this elbow guitar cord is especially suitable for you. The right angle head will all be more able to protect your guitar socket than a straight head, reducing unnecessary stress damage. No more need to replace the socket because of deformation and looseness..