Reviews Mold Part Injection

ZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)

  • 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
  • 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
  • Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
  • 3: 114 Fuel Pressure Gauge Tool Kit connection.
  • Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
  • 4：This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check Stock

FR4 Epoxy-Sheet Resin Glass-Fiber Insulation-Plate - 335X300X1MM Green

  • 1. FR-4 epoxy board has the characteristics of insulation, flame retardant, high temperature resistance, and strong physical properties.
  • 2. It is an indispensable main material or auxiliary material for high -end motor electrical appliances, wind power, hydropower, rail transit, aviation navigation, mold molds, electronics, intelligent physiotherapy and other industries..
  • 3. You can injection mold molding machine, motor, PCB, ICT treatment table grinding pad, high -performance electronic insulation, FPC reinforcement board, carbon film, insulation pad ..
  • 5.Size: 1/25 "Thick x 11.8" Wide x 13.2 "Long.
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber 30A, Platinum Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resins Molds & Silicone Molds N.W 2.2 lb (Sapphire Blue)

  • 【POT LIFE: 50 MINUTES, CURE TIME: 6 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【LONG SHELF LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 1 year, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone Mold Making 30A designed with a stunning Sapphire Blue Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
Check Stock

EZ-SIL Silicone Rubber, Translucent, Mold Making, Shore A 30 (Gallon kit(17.6lbs))

  • PREMIUM MOLDS MAKING SILICONE MATERIAL: Our translucent liquid silicone are made by safe silicone material, non-toxic and no odor, very flexible, soft and clear.You could also mix mold making silicone with mica powder to create new colors.l, non-toxic and no odor, very flexible, soft and clear.You could also mix it with mica powder to create new colors..
  • EASY MIXING & POURING: This silicone molds making kit includes part A and part B, the mixing ratio is 1:1 by weight. Pour the Part A and Part B together, then stir the silicone rubber for 5 minutes, make sure to stir the liquid silicone mixture thoroughly for better results.The working time is 5 minutes at room temperature..
  • NO BUBBLES: The bubbles of liquid silicone will automatically disappear within 2 hours, no vacuum degassing is necessary. The working time of making mold kit is 5 minutes at room temperature and the complete cure time is at least 12 hours at room temperature, it varies on your mold size and thickness. If it's s little sticky, please extend the curing time of silicone rubber.
  • GREAT FOR BEGINNER: If you're new to the mold making, this mold making kit is a perfect choice for you to try! No special skills or tools are needed. You could enjoy this fun and creative activity all day.HOW to....
Check Stock

EZETES Silicone Mold Making Kit, Translucent Liquid Silicone Rubber for Jewelry, Casting, Resin, Sculpture Silicone Molds, Soap, Candle Making - 21.16 oz - 1:1 Mixing Ratio Molding Silicone

  • FAST CURING & NO BUBBLES – Depending on the Size of Your Silicone Mold it takes up to 12 Hours to Cure Completely at Room Temperature. All Bubbles will Disappear AUTOMATICALLY within 2 Hours. In case of spill – Clean with Soapy Water..
  • LOVE IT OR LEAVE IT: We Provide Only the HIGHEST QUALITY Products. If You feel unsatisfied with our Silicone Mold Making Kit for ANY reason, We will Happily Refund Every Penny, and keep the Mold Kit as our Gift to You!.
  • MULTIPURPOSE APPLICATION – Our Silicone Mold Kit is IDEALLY SUITED for Making Unique Casting, Resin, Wax, Candle, Soap Molds – Your Imagination is Your Limit! Note: The Mold Making Kit is not intended for Food Purposed Silicon Molds..
  • PREMIUM SILICONE RUBBER MATERIAL – Our Mold Kit Translucent Silicone is COMPLETELY SAFE, NON TOXIC and ODOURLESS! Boost Your Creativity by Adding Mica Coloring Powder if you want to bring more Color to Your Silicone Mold.
  • EASY TO USE & GREAT RESULT – PERFECT FOR BEGINNERS! – Our Silicone Mold Making Kit includes 2 Parts of LOW VISCOSITY Liquid Silicone – 1:1 Ratio. Pour Part A and Part B Together and Stir Thoroughly, the Working Time is 5 Minutes!.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Plastic Bodywork White Blue Fairing Fit for Suzuki 2006 2007 GSXR 600 750 Injection Mold ABS New Bodyframe 06 07 GSXR-600 750

  • 1.[Fit for] SUZUKI 2006 2007 GSXR 600 750.
  • 2.[Complete Pieces Included] Front nose+ both sides fairings+ front fender+tail fairing+ unpainted black inner pieces+ rear seat cover + half tank cover.
  • 3.[Complete Pieces Included]Fairing Pieces + Windscreen + Heat-shielding.
  •  Holes and tabs are built into the mold and align to Factory Settings.
  •  Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • 5.[Attention]Instructions are Not Included.Highly Suggest Fairing be Installed by Professionals..
Check Stock