Reviews Mobile Rig System

Neewer Camera Shoulder Rig, Video Film Making System Kit for DSLR Camera and Camcorder with Soft Rubber Shoulder Pad and Dual Hand Grips, Compatible with Canon/Nikon/Sony/Pentax/Fujifilm/Panasonic

  • 【Camera Shoulder Rig】 Designed to provide a comfortable shoulder-mounted shooting experience, this shoulder rig adds stability while you’re shooting for an extended period of time so you can create crystal-clear videos.
  • 【15mm Rod Rail System with】 Easily mount your camera to the rig using the top 1/4” or 3/8” screw. The 15mm rods support your camera and the 60mm-gauge rod rails allow adjustments of units’ positions. The base also has a 1/4” and a 3/8” female thread, making it easy to mount on tripods.
  • 【Comfortable Shoulder Pad & Dual Hand Grips】 The soft rubber shoulder pad reduces the pressure on your shoulder and enhances stability. Dual hand grips are convenient for handheld shooting.
  • 【Wide Compatibility】 Compatible with a wide range of devices such as DSLR, mirrorless cameras, and camcorders.
  • 【Package Contents】 Neewer Camera Mount Slider, Soft Rubber Shoulder Pad, 15mm Rod Rail System with Dual Hand Grips.
Check Stock

Neewer Camera Shoulder Rig, Video Film Making System Kit for DSLR Camera and Camcorder with Soft Rubber Shoulder Pad and Dual Hand Grips, Compatible with Canon/Nikon/Sony, etc (Red + Black)

  • 【Camera Shoulder Rig】 Designed to provide a comfortable shoulder-mounted shooting experience, this shoulder rig adds stability while you’re shooting for an extended period of time so you can create crystal-clear videos.
  • 【15mm Rod Rail System with】 Easily mount your camera to the rig using the top 1/4” or 3/8” screw. The 15mm rods support your camera and the 60mm-gauge rod rails allow adjustments of units’ positions. The base also has a 1/4” and a 3/8” female thread, making it easy to mount on tripods.
  • 【Comfortable Shoulder Pad & Dual Hand Grips】 The soft rubber shoulder pad reduces the pressure on your shoulder and enhances stability. Dual hand grips are convenient for handheld shooting.
  • 【Wide Compatibility】 Compatible with a wide range of devices such as DSLR, mirrorless cameras, and camcorders.
  • 【Package Contents】 Neewer Camera Mount Slider, Soft Rubber Shoulder Pad, 15mm Rod Rail System with Dual Hand Grips.
Check Stock

JOBY GorillaPod Mobile Vlogging Kit (Smartphone Rig, Wavo Mobile Mic, Beamo Mini LED Light) Flexible Tripod, Phone Holder, Microphone, Light, Vlogger, IRL, Youtuber, Mobile, Content Creator

  • PORTABLE & LIGHTWEIGHT: Designed for the Mobile Content Creator on the go, the GorillaPod Mobile Vlogging kit is a combination of three ideal products for creating impactful mobile video shoots.
  • FLEXIBILITY BUILT IN: The GorillaPod Mobile Rig Base means you can Grip It, Wrap It, Stand It.
  • with landscape and portrait orientations for flexibility of use in any video situation.
  • CRISPY AUDIO: Shoot indoors or outdoors with phone/camera compatible Wavo Mobile Microphone, avoiding crowd noise, and with exceptional shock isolation thanks to the Rycote Lyre shock mount.
  • FLAWLESS LIGHT: Dimmable and Bluetooth controlled Beamo Mini LED Light, for perfect skin tones with the colour accurate (CRI 95+/-) setup.
  • CUSTOMIZABLE: Add and remove components depending on the shoot . Just add your own creative flair to get oustanding result in any video situation..
Check Stock

NEEWER Smartphone Video Rig, Metal Handheld Stabilizer Filmmaking Cage with Cold Shoes, Vlog Rig Accessory for Videographer Compatible with iPhone 14 Plus 14 Pro Max 13 Pro Max Samsung Huawei (CG100)

  • ...ides of the cage are hollowed out, allowing you to connect a headphone cable or charging cable without disassembling the cage. You can use it to quickly capture the best moments in life and edit/share them instantly.
  • 【Universal Stabilizer with Wide Clamp】 Uses a spring-loaded clamp to quickly grasp and release a mobile phone with a width from 2.24”/57mm to 3.74”/95mm. Compatible with most smartphones on the market, such as 13, 13 Pro Max, 13 Pro, 13 Mini, 12, 12 Pro, 12 Pro Max, Huawei P40 / P40 Pro, Samsung Galaxy S20 5G / S20 Ultra 5G / S20+ 5G, Xiaomi, Sony, and more.
  • 【Multiple Mounting Options】 The smartphone rig has multiple 1/4”-20 threaded holes, three cold shoe mounts, and two mounting holes with standard ARRI locating pinholes for attaching Neewer tripods, LED lights, microphones, and more. Note: The cold shoe mount is not compatible with Manfrotto MLBALL LUMIMUSE Accessory Ball Head Manfrotto LUMIMUSE LED Light..
  • 【Stable Video Shooting】 Easily maintain the balance of your phone by holding both sides of the rig—a handy accessory to stabilize shaky footage and enhance the handheld shooting experience. Mount it on any tripod, camera slider, stabilizer, or a Neewer skater dolly via the bottom or side 1/4”-20 holes to take bet....
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • 【Built in 1800W Power Supply】The mining machine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
  • 【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to ....
Check Stock

NICEYRIG Rosette Leather Handles with 15mm Rod Clamp Connector for 15mm DSLR Camera Shoulder Rig Support System

  • The camera handle kit with rosette is compatible with 15mm shoulder pad rig rod support system. More stable for 15mm shoulder rig system..
  • The rosette (M6 Thread Diameter 31.8mm) on the handle is replacement for ARRI rosette. The length of the handle is 145mm (5.7inch )..
  • The spacing of the dual 15mm rod clamp between the 15mm holes is 60mm fitting standard equipment..
  • The wingnut on the handle and 15mm rod clamp loads spring. You could pull it outside if you don't have a space to rotate..
  • Made of anodized aluminum alloy and cow leather, durable, soft, comfortable and lightweight..
Check Stock

Fanhasi 8 GPU Mining Rig Frame Case for ETH Crypto Miner with 8 GPU Mining Motherboard & 2000W Power Supply & 128GB SSD & 4G RAM & 8 Cooling Fans (Without GPU)

  • 8 GPU Slots Mining Rig System: Designed for Ethereum miner, you can put at most 8 Pcs GPU cards in the mining case. 65mm gap between each GPU ports gives the video cards enough space for air circulation for cooling. It's fit for most GPU card except 3060. NOTE: GPU cards are NOT Included.
  • 110V - 264V Input Power Supply: Built in 2000W PSU is designed for mining rig with up to 90% conversion efficiency. 110V - 264V universal AC input design allows you to enjoy mining at home easily. Without any modifying, it can work at a household voltage of 110V..
  • 8 Pcs Powerful Cooling Fans: This ETH mining rig case comes with 8 PCS adjustable cooling fans which help to accelerate air convection and keep the GPU card working at high performance. With the help of controller, you can control the fan speed to reduce the noise..
  • Case Type Mining Machine: The Ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. NOTE: GPU cards which are longer than 12.6 inch / 32cm in length are UNAVAILABLE for this mining rig..
  • Mining Rig Including: B75 motherboard, 2000W Supply Power (110V - 264V input ), CPU, 128GB mSATA SSD, 4G DDR3, 8 PCS 4500 RPM cooling fans. (NOTE: GPU cards are NOT Inc....
Check Stock

VTRETU Ethereum GPU Mining Rig with 8 GPU Mining Motherboard and 2000W Power Supply110-264V 8 Cooling Fans for Crypto Mining Rig Complete ETH Miner (Excluding GPU), black (V01)

  • ...n accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard and GPU working environment effectively.
  • ?Mining rig Including? : B75 motherboard, 2000W Supply Power, CPU,128GB SSD, 4G DDR 3, 4500 rpm cooling fan x 8. win10 system (not activated) (NOTE: GPU cards not include). Professionally installation and fully tested. Avoide unkown failures and save your time. Plug in the GPU to work immediately. Complete case design: dust&moisture-proof, safe&professional. Protect your mining machine. If you have any problem or received damaged goods , please feel free to contact us..
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock