Reviews Mixed Signal Oscilloscope

Passive Attenuator, 1.053M Input Res HT201 Converter Passive Attenuator 20:1 Passive Oscilloscope Signal Attenuator for Inductive Signal Primary Ignition, Automotive Diagnostics Use

  • 20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
  • PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
  • MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
  • PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
  • AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.
Check Stock

Digital Oscilloscope with 2 Channels 120Mhz Bandwidth Signal Generator 500MSa/s Sampling Rate, 2.8" LCD Backlight Display, Waveforms Storage, 3 Scan Modes, XY/YT/Roll, FFT Spectrum, Single Trigger

  • ☑Updated 2 Channels & High Bandwidth：2CH oscilloscope, 120MHz bandwidth, minimum measurement range 10mV /div, 500MSa/s sample rate,advanced digital trigger system.Up to 120M bandwidth can easily cope with mearsurement testes in various fields. Such as mcu debugging, car repair, home appliance repair, personal DIY, electronic competition, power supply debugging, inverter, etc. It can also be used as a portable tool for on-site debugging..
  • ☑FFT Spectrum & Cursor Measurement: The professional portable oscilloscope with FFT display function, can analyze the spectral characteristics of the signal. Cursor measurement function, convenient manual measurement period, frequency and voltage..
  • ☑3 Trigger Modes & One-key AUTO: The DIY oscilloscope kit configured 3 trigger modes, auto/normal/single trigger. Support waveform parameter setting,such as time base, amplitude, trigger slope, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement..
  • ☑Signal Generator: The bottom of the oscilloscope can output a variety of waveforms of 2.5....
Check Stock

ICC/Intervox MEO-65PD-02-623, Microphone; 20 to 16000 Hz; 2 V; 0.5 mA(Max.); 6 mm x 5.2 mm; -66, -64, -62 dB

  • ★★★★★【High Performance】Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V)..
  • ★★★★★【Application Range】Designed for assisting automobile measurement.Can allow oscilloscope to measure fuel injector and primary ignition waveforms..
  • ★★★★★【Important Parameters】Attenuation: 20:1.
  • ★★★★★【Package Include】1 x HT201 Signal Attenuation.
  • ★★★★★【Quality Service】If you have any technical questions,please contact us and we will give you a detailed answer as soon as possible..
Check Stock

Signal Generator, Multi-Function LHT00SU1 Oscilloscope 2 Channel Input Virtual Oscilloscope Logic Analyzer USB Logic Analyzer

  • 【Supported Protocols】Serial Peripheral Interface, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS / 2.
  • 【Multi Purpose】8-channel logic analyzer, Data Logger. PWM controller, Frequency generator. Frequency meter, Remote controller.
  • 【Dual Channel】Dual channel voltmeter, Mixed signal oscilloscopes and logic analyzer, Dual input oscilloscope (single, 16Msps, 3MHz bandwidth).
  • 【Frequency Meter】PWM controller, Frequency generator. Frequency meter, Remote controller.
  • 【100% Guarantee】High quality product, we promise to do everything possible to satisfy all customers. However, if you are not 100% satisfied with our service or our products, simply contact us. We are always at the side of our customers to support and continuously seek new ways to improve.
Check Stock

CJ4-R OBDII/CAN Automotive Scanner Diagnostic Scantool with 2-Channel Labscope & Wireless Bluetooth Communication

  • ✅ [COVERAGE] - The CJ4R OBD2 scanner has special features plus extensive coverage. Over 35500 (DTC)s in library covering 55 brands and 28 makes in....
  • ✅ [SPECIAL FUNCTIONS] The CJ4R performs special functions in specific makes and models such as: key / alarm control reprograming in specific....
  • ✅[OSCILLOSCOPE] - With the built-in 2-channel oscilloscope, you can perform any signal measurement in real time. Using this oscilloscope, you will....
  • ✅ [UPDATeS] – It includes two years of free updates from the date of purchase. After this period of time, update cost is among the lowest in the....
  • ✅ [WARRANTY]- 3 years (36 months) of warranty.
Check Stock

1HZ-500KHZ FG-100 DDS Functional Signal Generator Frequency Meter Signal Source Module Frequency Counter

  • Feature FG-100 DDS Function generator is a low frequency signal generator..
  • It is small size, full function, easy operating and portable. Its power supply can be either AC/DC adaptor or a Lithium battery..
  • Working with an oscilloscope, it can be used to troubleshoot the electronic circuit, characterize the audio amplifier frequency response or measure the impulse response..
  • Due to the excellent DSS accuracy and frequency stability, it can also be used to calibrate the sweep time factor for oscilloscopes. You can also use its square wave to calibrate your oscilloscope attenuator or adjust your oscilloscope probe.
  • Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave..
Check Stock

DSO138 Oscilloscope, DIY Mini Oscilloscope DSO-138, 2.4″ TFT 1MSPS Digital Oscilloscope Kit Handheld Pocket Sized 13803K (Welded Version)

  • 【WIDELY USE】DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay). Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
  • 【EXCELLENT QUALITY】This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • 【PRODUCT FEATURE】DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
  • 【NO NEED SOLDERED】DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • 【DIY DESIGN】Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Pocket-Size Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Electronic Learning Set, Assembled Vision (Welded)

  • This DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • This oscilloscope board uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • 2.4″ Oscilloscope with automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • 2.4 inch TFT handheld pocket-size digital oscilloscope with waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Partially open-sourced,the MCU has been programmed, adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

Fluke 123B Industrial ScopeMeter hand-held Oscilloscope, 2 input channels, 20 MHZ bandwidth, SCC120 Kit

  • Hand-held dual channel oscilloscope, and recorder.
  • Connect-and-View & IntellaSet Auto reading Technology for simplicity and hands-off operation.IntellaSet technology automatically and intelligently adjusts numerical readout based on the measured signal.
  • Li-Ion rechargeable battery, seven-hours operation (with four-hour charge time).
Check Stock