Reviews Miter Welding Clamp

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
  • Package Included:1 x Welding Ground Clamp.
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..
Check Stock

Xcalibur Tooling Heavy Duty Tenoning Jig for Table Saw & Cutting Tenons - Versatile & Sturdy Woodworking Tool (Pack of 1)

  • Fits left and right tilting table saws, Fits with 3/8″ x 3/4″ miter gauge slots.
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch.
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots.
  • Extra-large clamp handwheel, This reasonably priced multi-purpose jig features 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. The work support tilts left up to 15° for angled or compound tenons. An adjustable positive stop and micro-adjust knob allow easy, precise set-up..
  • Compatible with a table saw with 3/8″ x 3/4″ miter slots.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Pony Jorgensen 9180 Adjustable 45-Degree Angle Clamp

  • Clamp will miter or butt joints and is perfect for framing and cabinet assembly.
  • Features 2-1/2" miter/butt joint capacity.
  • Plastic coated die cast jaws for non-marring..
  • Rear jaw swivels for easy adjustment on different material thickness..
  • Large comfortable handle and acme threads for strength.
Check Stock

Corner Clamps 4Pcs Woodworking 90 Degree Clamps of Cast Metal, Durable Go-tool Right Angle Clamp with Adjustable Jaws Good for DIY Framing, Shelving, Welding, Fish-tanks, Cabinets

  • ...g your busy hands without requiring more aligning and turning..
  • §【Versatility】: The woodworking corner clamps align two pieces of wood, planks, metal, or glass into the clamp at a 90-degree angle. Moreover, the right angle clamps set is suitable for fixing fish-tanks, joining photo frames, installing furniture, welding, and molding, featuring holes in the base that allow them to be mounted to a workbench to add more stability for setup..
  • §【Premium Quality】: The rustproof aluminum-alloy parts of the unit make the angle clamps exceptionally long-lasting and coating on the surface prevents corrosion without worrying subpar paints would rub off on your workpieces. The vise-like design can hold firmly up to 200  pounds of pressure and nylon rounds that keep you from damaging the pieces being joined..
  • §【Accuracy】: The accuracy of the corner clamps allows you to make and reinforce frames with precision featuring maximum clamping range of 3-inch. The swivel jaw can rotate the clamp to adjust work-pieces to different thickness. The reinforced connection and metal diagonal connection part of the angle clamps decrease the excessive pressure which can cause breaking..
  • §【Lightweight】: Weighing in at just over 1.25 pound, corner clamps with lightw....
Check Stock

O SKOOL Miter Max Corner Clamp for Woodworking Making Window Casing Making Door Casing Crafting Projects

  • Turn one-half turn of the handle, the pins will insert into the wood with rotation, make sure the wooden junction connected tightly for holding miters....
  • This miter clamp is made from heavy gauge steel and solid brass. The rustproof and rugged construction ensures these clamps will be reliable for a....
  • The pins on the miter clamp bite into the wood to keep it in place. It does leave a few dimples in the edge of the wood, but so would spring clamps or....
  • The jig's unique cam design exerts such pressure on mitre joints that wood piece can be hauled around by one leg immediately after gluing. You get a....
Check Stock

N126162 Miter Saw Dust Bag | table saw dust Collect Bag for Chop Saw Compatible with Dewalt DW715 DW716 DWS780 Type 1 DWS782 1Pack

  • 【Wide Compatibility】DW715 12" compound miter saw, DW DWS780 type 1, DWS782 sliding miter saw..
  • 【Note】Not fit: DW703, DW705, DW708 12" miter saw, DW713 10" saw, DW716 !!!.
  • 【Premium Quality】Table saw bag dust is made of healthy and environmentally friendly material, can be recycled many times.
  • 【Easy to Install】As long as you have the plastic receiver with the wire and the sawdust bag is attached to the receiver with the plastic clamp,....
  • 【Keep Cleaner】Captures sawdust in miter saw bag universal when you work.keep your shop and your work surface cleaner.Prevents dust from catching....
Check Stock