Reviews Miter Saw For Steel

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

DEWALT Miter Saw, Single Bevel, Compound, 10-Inch, 15-Amp with w/Safety Goggle (DWS713 & DPG82-11C)

  • Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops.
  • The mitre saw has a precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically.
  • DEWALT tough Coat hard coated lens provides tough protection against scratches.
  • DEWALT Xtra clear anti-fog lens coating provides tough protection against fogging.
  • Soft, dual injected rubber conforms to the face to provide a high level protection from dust and debris.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

DEWALT Miter Saw Stand, Heavy Duty (DWX723)

  • Universal design of DEWALT miter saw stand works with all brands of miter saws.
  • Lightweight aluminum construction (29 lbs.) of DEWALT miter saw stand allows for easy transport to and from the jobsite.
  • 5-1/2 ft. beam extends to support up to 16 ft. of material and up to 500 lbs..
  • Legs provide superior support and fold for easy storage.
  • Leg Lock Levers allow for fast and easy set up.
  • Miter saw mounting brackets allow easy and secure mounting of miter saw to stand.
  • Work stops/supports can be repositioned quickly anywhere along the rail.
  • Non-marring feet on tool mount will not scratch material.
  • Extension lock levers allow for fast and secure tightening of extensions.
Check Stock

Rockler Clamp-It Corner Clamp Jig - Glass-Filled Polycarbonate Woodworking Clamps - Corner Clamps to Hold Panel Parts Together - Right Angle Clamp for Fastening Work - Woodworking Tools

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Astro Pneumatic Tool 936 Onyx Gear Driven Heavy Duty Air Saw

  • ✪ Cuts wood, brass & similar light materials with smooth, precise cuts.
  • no sanding needed! Cuts to a depth of 1/2 in. - ideal for frames and molding..
  • ✪ Make miter cuts from 0° to 45°.Fast 7800 rpm and a 3/8-Inch arbor. 2-Inch blade diameter and a .020 inch blade thickness..
  • ✪ This Mini Benchtop Cutoff Miter Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting metal, wood, plastic and other light materials..
  • ✪ Has adjustable miter gauge, perfect for all your DIY projects! This precision bench saw makes perfect cuts in soft metals, wood and plastic in 1/10th the time it takes by hand..
  • ✪ This bench-top saw is so accurate that you might never have to file or sand ends! Compact size and portable.
  • easy to use for cutting metal, aluminum, copper, plastic and wood!.
Check Stock

Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8\ x 3/4\ Miter Slot – Fence Accessories

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

The MAX Multipurpose Axe Toolkit by Forrest Tool Includes 8 Essential Tools for Camping Hunting Gardening and Off-Roading Constructed with Reliable Material Easy to Use

  • Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops.
  • The mitre saw has a precise miter system and machined base fence support.
  • Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT....
  • Tall sliding fences support 6-3/4-inch base vertically.
  • Bevels 0 degree - 48degree left and right.
Check Stock

NEIKO 10768A 12" Carbide Chop Saw Blade, 2 Pack, 80 Tooth with 1-Inch Arbor, Compatible with Miter, Table, Radial Arm, Cut-Off, Standard Circular Saws, for Home Building, Construction, Woodworking

  • 【IMPROVE EFFICIENCY】 This aluminum alloy miter rod is usually used for table saw woodworking work, effectively improving efficiency..
  • 【ALUMINUM ALLOY MATERIAL】 The miter rod is made of high-quality aluminum alloy material, with high strength and long service life..
  • 【STANDARD SIZE】 The miter rod has a universal threaded mounting hole, which is easy to use and fits in a standard miter groove..
  • 【STAINLESS STEEL PULLEY】 Our oblique street poles use adjustable stainless steel pulleys to easily achieve a perfect sliding effect..
  • 【SCOPE OF APPLICATION】 This is a miter slide bar, used to construct various jigs on the table saw, such as miter sleds, etc..
Check Stock