Reviews Miter Gauge For Table Saw 2

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby and Right Side Dubby Sleds are Included)

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles on your mitered projects with the Dubby Sled. The Dubby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer yo....
Check Stock

WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop

  • Positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions.
  • Adjustable miter bar fits snug inside standard 3/4" x 3/8" miter slots.
  • 17-1/2"-long anodized aluminum fence rail adjusts along miter gauge head.
  • Flip-stop adjusts along the fence for repeatable accuracy - Improve safety and accuracy on the table saw and the router table.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
Check Stock

Rockler Clamp-It Corner Clamp Jig - Glass-Filled Polycarbonate Woodworking Clamps - Corner Clamps to Hold Panel Parts Together - Right Angle Clamp for Fastening Work - Woodworking Tools

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8\ x 3/4\ Miter Slot – Fence Accessories

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Mini Cut-off Miter Saw, 110V Mini Benchtop Cut-Off Chop Saw-Adjust Miter Gauge with 2' Blade 1/2' Cuting Depth Miter for Arts Cutting Wood Plastic Metal DIY Working

  • Mini cut-off miter saw fit for cutting soft wood, plastic, aluminum, copper, fiberglass, brass perfect for all your DIY projects..
  • 110V mini benchtop cut-Off chop saw fit to cuts upto 1/2″ thick wood or 1/2″dia metal tube, cuts miter corners from 0° to 45° with adjustable miter guage..
  • Mini miter cut-off chop saw of main parameters: Maximum speed 7800 rpm and 3/8-Inch arbor, 2-Inch blade diameter and 0 .02 inch blade thickness..
  • mini craft miter saw, mini cut off saw, 2 inch chop saw, mini miter table saw, 2 chop saw, power mini miter saw, miniature miter saw, mini bench saw, miniature cut off saw, miniature craft miter saw.(Note:it can only cut softmetal (like brass, aluminum) with thickness less than 3mm, it can not cut hard metal (like stainless steel/iron) and thick metal..
  • 100% satisfactory service, if you have any questions, please feel free to contact us by email ! We will solve it for you in the first time!.
Check Stock

Trend UVJS/TG/JIG Varijig Tenon and Grooving Jig

  • Fits left and right tilting table saws, Fits with 3/8″ x 3/4″ miter gauge slots.
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch.
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots.
  • Extra-large clamp handwheel, This reasonably priced multi-purpose jig features 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. The work support tilts left up to 15° for angled or compound tenons. An adjustable positive stop and micro-adjust knob allow easy, precise set-up..
  • Compatible with a table saw with 3/8″ x 3/4″ miter slots.
Check Stock

Beslands Backlight Digital Level Box Protractor Angle Finder Gauge Bevel Gage Inclinometer with Aluminium Framework Magnetic Base Saw Electronic Finding

  • Working Temperature: 32°F to 122°F (0℃ to 50℃)..
  • Strong Magnetic Base - Firmly fixed on saw tables, fences, blades and other metal surfaces.
  • reversible display reversed when inverted..
  • Easy carrying - Compact and lightweight, constructed of aluminum alloy and ABS, this magnetic miter gauge is compact and lightweight..
  • Energy Saving - Just one AAA battery (not include) can keep this energy-saving level gauge working for more than 50 hours..
  • Wide Range of Applications - this digital angle gauge can be used for in auto repair, machine manufacturing, table saw or miter saw blade lever measurement, constructional engineering, and for construction, woodworking, machinery, telecommunications, automobile etc..
Check Stock