Reviews Miter Box For Cutting Metal

Metabo HPT Sliding Compound Miter Saw | 10-Inch Blade | Double Bevel | Laser Marker | 15-Amp Motor | 5 Year Warranty | C10FSHCT

  • INCLUDES: C10FSHCT miter saw, 10" 40T TCT Saw Blade, Dust Bag, Vise Assembly, 13mm Box Wrench.
  • POWER: Powerful 15 Amp motor to tackle tough cutting jobs with ease.
  • BEVEL ANGLE: 0-48 degree bevel angle range to the right and left allows user to quickly and easily flip the saw blade, and leave the material in place.
  • MITER ANGLE: 0-60° miter angle to the right and 0-55°miter angle to the left for ultra-flexibility.
  • COMPACT SLIDE SYSTEM: Simple and compact slide system allows the saw Head to slide along fixed rails, for zero rear clearance.
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc

  • ...luable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used..
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length....
Check Stock

GENERAL INTERNATIONAL 4" Portable Metal Cutting Bandsaw - 5A Horizontal Band Saw with Compact Design & Adjustable Blade Guide - BS5202

  • HIGH-POWERED CUTTING - Powerful motor easily & efficiently handles various metal cutting needs. (550W Motor, 120V~60Hz, Amp: 5, 3/4 hp).
  • LIGHTWEIGHT & PORTABLE - The extreme compact, lightweight build (33 lbs), allowis for metal cutting on the go..
  • PRECISE HEAD-PIVOTING - Pivoting head with scale rotates to make accurate miter cuts at any angle up to 45 degrees..
  • TWO BLADE SPEEDS - Make cuts at 197ft/min or 262 ft/min. (Blade Length: 52-1/2 in.).
  • VERSITILE METAL CUTTING - Cast iron vise opens to 4-1/8 in. allowing for cutting of various sizes of metal. Also, includes Adjustable Blade Guide for added cutting precision & stability..
Check Stock

BOSCH CM10GD Compact Miter Saw - 15 Amp Corded 10 In. Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade & 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

  • Product 1: ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment.
  • Product 1: CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy cleanup..
  • Product 1: CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown. Depth Front-to-Back, Not Including Arm: 30 inch.
  • Product 1: COMPACT: Featuring a compact design that replaces the sliding rail system, taking up to 10 In. less workspace than a slide miter saw. This Bosch miter saw is perfect for tight quarters where other saws just won’t do..
  • Product 2: Powerful table saw has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross cutting of fine and rough materials.
Check Stock

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle..
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees..
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting..
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for....
Check Stock

DEWALT 20V MAX* 7-1/4-Inch Miter Saw, Cordless (DCS361M1)

  • DEWALT 20V miter saw utilizes 20V Max* battery pack (DCB204) which provides on average 183 cuts of 2x4 Pine or 275 cuts of 3-1/4 pine baseboard.
  • Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility for the mitre saw.
  • DEWALT miter saw has the capacity to cup 3 5/8-inch nested crown and 3 1/2 base vertically.
  • Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy,.
  • Oversized bevel scale makes bevel angle adjustments accurate and easy.
  • Compact, lightweight design (31.6 bs.) allows for easy transport and storage.
  • Cam lock miter handle delivers quick and accurate miter angles.
  • Precise miter system and machined base fence support optimize durability and cutting accuracy.
Check Stock

Jet Tools - Bandsaw Blade, Resaw, 67-1/2 x 1/2 x 0.032 x 4HK (707202)

  • Unique design feature a swivel-head for miter cutting structurals, pipe and tubing.
  • Miter head swivels from 90? to 45?, while the stock remains in the same position.
Check Stock