Reviews Mini Itx Cases

JGINYUE H97 Mini ITX Motherboard, White LGA 1150 Motherboard Support Intel i5 i7/Xeon E3 (DDR3/M.2 NVME/M.2/VGA DP HDMI-Compatible/PCIe X16/SATA 6Gb/s/2 Gigabit Ethernet)

  • LGA 1150 Mini ITX Motherboard: Equipped with LGA1150 CPU socket, supporting Intel i5/i7 and Xeon E3 series processors..
  • Three image transmission interfaces: This mini itx gaming motherboard supports VGA, DP, and HDMI-compatible high-definition high-performance graphics and audio signal display, you will have more choices in configuration..
  • Dual M.2 slots: The Intel motherboard with M.2 NVME protocol (support NGFF) slot, transmission power up to 32Gbps. Can support M.2 NGFF card.
  • DDR3 dual-channel memory: The LGA 1150 computer motherboard supports dual-channel Non-ECC Unbuffered DDR3, 1600/1333Mhz effective frequency. The maximum memory capacity is 16G..
  • Stable power supply: 4-phase power supply CPU stable power supply, all solid-state capacitor design, equipped with 24+8 pin power interface, to ensure the stable operation of the motherboard..
Check Stock

Silverstone Tek Plastic/SECC Mini-ITX Computer Case with 2x USB 3.0 Front Ports SFF Cases Black SG05BB-LITE

  • Unprecedented 120mm fan in mini casing for positive pressure cooling.
  • Mini-DTX/Mini-ITX motherboard & SFX PSU compatible.
  • Standard-length expansion cards support (10 inches).
  • Elevated standoff for motherboard back side components.
Check Stock

DIYPC Solo-T2-R Black USB 3.0 ATX Mid Tower Gaming Computer Case with 2 x Red Fans (1x 120mm LED Fan x Front, 1x 120mm Fan x Rear) Pre-Installed

  • Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC..
  • The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables..
  • Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. Motherboard will fit in our 4000 Series cases without any issue. Mini-ITX, micro-ATX, ATX, and E-ATX form factor motherboards are all supported..
  • A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height)..
  • Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack..
Check Stock

Goodisory M06 SPCC 0.6mm Mini ITX Black Desktop Computer Chassis 2.5 Drive Bay with VESA Rack

  • Motherboard: only compatible with mini-itx (6.7" x 6.7").
Check Stock

KCMconmey 4 Bay DIY NAS Case, 4 x 2.5/3.5 Tray. Compatible ITX MB Flex PSU. with Front USB 3.0 12cm Chassis Fan Hot Swap Backplane. Network Attached Storage Enclosure.

  • [Support Mini ITX Motherboard] ITX Motherboard dimension 6.7*6.7in (17*17cm)..
  • [Support Flex Power Supply Unit] Flex PSU dimension 3.21*1.59*5.91in (81.5*40.5*150mm)..
  • [Support 1 Single Slot Full Height PCI-e Expansion Card] To add video card or network card or more..
  • [Come With 1 Front USB 3.0 or 2.0 Port] 2 in 1 cable only plug one connector to motherboard..
  • [Come With 1 12cm Replaceable Fan] Pre-installed 120*120*25mm chassis fan..
Check Stock

MHQJRH Graphics Card GPU Brace Support Video Card Sag Holder Bracket Anodized Aerospace Aluminum Silver

  • ➤ Universal VGA Graphics Card Holder for Computer Cases..
  • ➤ All-aluminum metal material - Provides strong and long-lasting support..
  • ➤ Anodized - Anodized by aluminum alloy CNC process..
  • ➤ The bottom and support modules are equipped with anti-slip mats to better protect your graphics card..
  • ➤ Sliding adjustment design - The graphics card bracket design can be compatible with various chassis configurations of traditional, MATX, ITX and....
Check Stock

Silverstone Tek Mini-ITX/DTX Plastic Front Panel Case with 2X USB 3.0 Front Ports for Motherboard SG05W-USB3.0 White

  • Ample space for CPU cooling (82mm in height).
  • Elevated standoff for motherboard back side components.
  • Unprecedented 120mm fan in mini casing for positive pressure cooling.
  • Mini-DTX / Mini-ITX motherboard & SFX PSU compatible.
Check Stock

IN WIN 350W TAC 2.0 MicroATX Mini Tower Case Z589.CH350TB3 Black

  • Expansion slots: 4x PCI-E expansion Slots.
  • Cooling system: 1x 80 or 90mm rear fan vent (fan not included).
  • Front I/O panel: 2x USB 3. 0 Ports, HD Audio.
Check Stock

Silverstone Tek SG05B-USB3.0 Mini-ITX/DTX Motherboard Plastic Front Panel Case with 2X USB3.0 Front Ports Cases Black

  • Ample space for CPU cooling (82mm in height).
  • Elevated standoff for motherboard back side components.
  • Unprecedented 120mm fan in mini casing for positive pressure cooling.
  • Support 2.5-Inch and 3.5-Inch hard drives.
  • Mini - DTX / Mini - ITX motherboard & SFX PSU compatible.
Check Stock