MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)
- -Arduino MEGA R3 (generic high quality) + USB cable -6xAA Battery holder (9VDC) -WiFi ESP8266 module -Model Bluetooth Master / Slave HC-05 -Box with plastic cells (organizer of components) -Shield for prototypes + Mini-Breadboard -Large Breadboard (830 points ) -Dupont Cables 10 * Female-Female + 10 * Male-Female + 10 Male-Male -Cable Jumper for breadboard -6 Push Buttons with multicolored caps -Joystick Module type PS2.
- -RC-522 RFID Module with white RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
- 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
- -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 *....
Check StockAUSTOR 840 Pieces Preformed Breadboard Jumper Wire Kit 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits
- Package includes: contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size.
- Wire Length: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm.
- Easy to use: each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard.
- Wide Application: these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
- Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
- if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.
Check StockDaFuRui Breadboard Jumper Wire Kit with 400-Point Breadboard、65pcs Multiple Sizes M/M Bread Board Jumper Wire、140 Pieces 2-125 mm U-Shape Preformed Jumper Wire Kit
- ★【Excellent Quality】The kit is ideal for setting up a trial circuit, prototype or experimenting.A variety of colors, lengths, can be classified....
- ★【Powerful Function】400 tie-points Solderless Breadboard, With self-adhesive tape on the back for easy bonding.65pcs 4.4in 6.3in 8.3in 10.3in....
- ★【Easy to Install】The Breadboard Helper includes 2/5/7/10/12/15/17/20/22/25/50/75/100/125 MM 14 different lengths.Different colors: 140Pcs long....
- ★【Widely Used】Can be used for wiring of breadboard circuits or where power or circuit connections.Proto-Typing Circuit,Electronic,Electrical....
- ★【Package Content】1PCS 400 tie-points Solderless Breadboard,65PCS long and short solderless breadboard jumper kit,140Pcs 14 different....
Check StockSparkFun Compatible with Arduino Pro Mini Starter Kit - 5V/16MHz - Comes to get a Project Started
- The Pro Mini is SparkFun's minimal design approach to Arduino running at 5V with a 16MHz bootloader. Does not come with connectors populated so that you can solder in any connector or wire with any orientation you need..
- Includes: Compatible with Arduino Pro Mini 328 - 5V/16MHz, FTDI Basic Breakout - 5V, Breadboard - Mini Modular (White), USB Mini-B Cable - 6".
- Also includes: Break Away Headers - Straight (40-pin), Jumper Wires Premium 4" M/M (30 pack), LED - Basic Red 3mm, LED - Basic Green 3mm, 2x Resistor 330 Ohm 1/6th Watt PTH, Break Away Headers - Right Angle (6-pin), 2x Female Headers (2-pin).
- Pro Mini Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance), 0.8mm Thin PCB, USB connection off board, Supports auto-reset, 5V regulator.
- Pro Mini Features: Max 150mA output, Over current protected, Weighs less than 2 grams! DC input 5V up to 12V, On board Power and Status LEDs, Analog Pins: 8 Digital I/Os: 14, 0.7x1.3" (18x33mm).
Check StockArduino Nano [A000005]
- The Arduino Nano is one of the smallest Arduino boards available on the market.
- Tiny form factor, complete, and breadboard-friendly board based on the ATmega328.
- Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.
Check StockVilros Breadboard Breakout for Raspberry Pi
- Fully open breadboard is soldered from the bottom to leave all the holes open.
- Simply Connect the included 40 GPIO cable any 40 pin Raspberry Pi Pinout and enjoy the fully broken out breadboard.
- Breadboard has Printing indicating the pin number and function of each hole.
- Back of Holder has detailed pinout description.
- Under 1 Year No questions asked warranty.
Check Stocksb components Raspberry Pi Pico Board with Raspberry Pi Pico Breadboard Kit, Multi-Purpose Raspberry Pi Pico Breadboard Kit
- Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing.
- It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.
- Raspberry Pi Pico Breadboard Kit is a multi-purpose Kit that consists of a “400 points half-size breadboard”.
- Pico Breadboard Kit consists a programmable buzzer, 4 programmable LEDs, 4 pushbuttons, and dedicated 5V, 3v3, and GND pins at a single place.
- Raspberry Pi Pico Breadboard Kit is specially made to work with the Raspberry Pi Pico Board.
Check StockREXQualis 840 Pieces Breadboard Jumper Wire Kit with 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits
- Package Includes: Contains 840 pieces U shape preformed breadboard jumper wires, 6 individual clamshell containers each holding 140 pieces jumper....
- 14 Different Lengths: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm, meet your various experimental....
- Easy to Use: Each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard, make prototyping on a breadboard....
- Wide Application: with variety of sizes and color design, these breadboards wires are ideal for use with any breadboard, prototyping, prototype....
- We have always cared about the customer experience and improve the product function details, and also provide quick-responding technical support..
Check StockAUSTOR 560 Pieces Jumper Wire Kit 14 Lengths Assorted Preformed Breadboard Jumper Wire with Free Box
- Parameters: U shape, 24 AWG, male to male, wire length 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm.
- Wide applications: designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects.
- Easy to use: all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard.
- Extra bonus: come with a free plastic box, keep your jumper wire kit organized, convenient for store and fetch.
- Note: the breadboard wire is a little soft so that convenient for changing its shape to do connect test.
- if you find that it can't be inserted, please check whether the cable in the pin hole of the breadboard is in good condition or not.
Check Stock