Reviews Milwaukee 12v Drill Driver Combo

DEWALT 20V MAX* Cordless Drill Combo Kit , Brushless, (DCK277C2)

  • DEWALT brushless motor of cordless drill combo kit delivers up to 57% more run time over brushed.
  • Compact (5.4-inch front to back), lightweight (2.0 lbs) Impact Driver design of the corodless tools combo kit fits into tight areas.
  • Compact (7.52-inch front to back), lightweight Drill/Driver in thed drill/ impact driver combo kit is designed to fit into tight areas.
  • Ergonomic comfort grip handle provides ideal balance and tool control.
  • LED light with 20-second trigger release delay provides increased visibility in dark or confined spaces.
  • Impact driver's one-handed loading 1/4-inch hex chuck accepts 1-inch bit tips.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

Milwaukee 2694-22 M18 18-Volt Lithium-Ion Cordless Hammer Drill/Sawzall Combo Kit (2-Tool)

  • M18 cordless 1/2 in. hammer drill/driver with Milwaukee 4 pole frameless motor delivers 550 in.-lb. of peak torque at 0 - 450/0 - 1,700 RPM and 29,000 BPM.
  • M18 cordless Sawzall reciprocating saw with gear-protecting clutch and counter balance mechanism.
  • Milwaukee 2694-22 includes a carrying case for storage and tool transport.
  • Red lithium advantage:productivity: 40% more run-time, 20% more speed, 20% more torque, fade free power. Durability: Operates down to 0/-18, runs 20% cooler, up to 50% more recharges, no memory effect.
  • Includes: One M18 Compact 1/2" Hammer Drill/Driver (2607-20).
  • Two M18 REDLITHIUM XC Extended Capacity Battery (48-11-1828).
  • One M18 & M12 Multi-Voltage Charger (48-59-1812).
Check Stock

Metabo HPT 18V MultiVolt Hammer Drill and Triple Hammer Impact Driver Cordless Combo Kit | Lifetime Tool Warranty | KC18DBFL2C

  • DCD701 12V MAX* Brushless 3/8 inch drill/driver has 32% more power**.
  • DCD701 12V MAX* Brushless 3/80-inch drill/ cordless impact driver is 20% shorter**.
  • Brushless motor for maximum runtime and durability.
  • The drill/driver has a 3/8 inch ratcheting chuck for a wide variety of bits.
  • The drill/driver has a high speed transmission with 2-speed settings and 15 clutch settings.
Check Stock

Milwaukee 2801-22CT M18 18-Volt Lithium-Ion Brushless Cordless Compact 1/2 Inch Drill/Driver Kit with 2 Batteries 2.0 Ah, Charger and Case (Non-Retail Packaging)

  • DCD709 hammer drill/driver in the cordless drill combo kit is compact at only 6.9-inch front to back designed to fit in tight spaces.
  • DCD709 hammer drill/driver in the cordless tools combo kit is lightweight at only 2.5 lbs..
  • DCF809 Impact Driver of the drill/ impact driver combo kit is only 5.1-inch in length to fit in tight spaces..
  • DCF809 Impact Driver has 1700 in-lbs of torque delivering the power you need to get a majority of applications done.
  • Both tools have a DEWALT built brushless motor for efficient performance and runtime.
Check Stock

BeHappy Cordless Drill Combo Kit 21V, 1/2 Inch Brushless Power Tool Kit and 1/4 Inch Impact Driver, Electric Drill Kit with 2 Batteries and Charger, DIY

  • 1/2 Inch Drill Driver: The drill driver with a max 21V can provide 1000in-lb (110Nm) torque, and the 19+1-position clutch has two modes for you to choose from. At the same time, it has 2-speed transmissions (0-500RPM/0-2000RPM), thus avoiding overdriving screws. The cordless drill set can handle most drilling and driving tasks.
  • 1/4 Inch Impact Driver: The impact driver can generate up to 2600 in-lb（300Nm） torque, while the variable speed switch provides 0-2600RPM and 0-3300IPM, which can handle most fastening tasks, ideal for repairing work, furniture assembling, and other DIY hand working.
  • The direction-of-rotation selector located above the trigger switch allows you to change the direction of bit rotation.
  • Brushless Design: The brushless drill combo kit is different from the traditional brushed drill, eliminating the need for the conductive carbon brush of the traditional brushed motor, no maintenance, the failure rate will be lower in comparison, and the operating time and voltage will be more stable. The power drill combo kit will also have a longer service life, with less interference with radio equipment and less noise.
  • Ergonomic Design and LED Lights: The non-slip handle of the power tool combo kits is made of soft rubber, which is ergon....
Check Stock

BOSCH PS11-102 12V Max 3/8 In Right Angle Drill/Driver Kit with 2.0Ah Lithium Ion Battery

  • POWER: A 12V motor provides 1,300 RPM as well as 115 in-lbs. max torque in a lightweight drill driver weighing only 2.75 lbs..
  • VERSATILE: The 5-position pivoting head articulates from 90-degrees to 180-degrees, making it the perfect drill driver combo for working in tight....
  • CONVENIENT: The 3 8-Inch auto lock chuck allows for simple bit replacements and a variety of applications including anything from driving 3 inch....
  • VARIABLE SPEED: The PS11-102 utilizes a variable-peed trigger for perfect speed regulation. This tool is signifcantly faster than current competition....
  • PRECISION: Comes standard with a motor brake for exact serial screw driving and Bosch's Electronic Cell Protection to ensure longer battery life and....
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • Phillips, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down ....
Check Stock

DEWALT 20V MAX* Cordless Drill Combo Kit , 6-Tool (DCK661D1M1)

  • DCD771 Drill/Driver in the cordless drill combo kit is compact (front to back) and lightweight, designed to fit into tight areas.
  • DCD771 Cordless Drill/Driver in the cordless tools combo kit has a high-performance motor that delivers 300 unit watts out (UWO) of power for completing a wide range of applications.
  • DCS885 Cordless Impact Driver of the drill/impact driver combo kit has a compact design (5.55-inch front to back) to fit into tight areas.
  • DCS381 Cordless Reciprocating Saw with keyless blade clamp allows for quick blade changes without touching the blade or reciprocating shaft..
  • DCS393 Cordless Circular Saw with 6-1/2-inch carbide blade can cut 2x4s at a 45-degree angle in a single pass.
  • DCG412 Cordless Grinder provides high-power for cutting and grinding applications up to 8,000 rpm.
  • DCS356 Cordless Oscillating Multi-Tool 3-speed selector allows users to choose their speed setting based on application.
Check Stock