Reviews Milling Cutters For Aluminum

Milling Cutter, 3.175mm Milling Cutter, High Efficiency 10pcs Ultra-Fine Grained Cemented Carbide Materials for PCB SMT

Including 10pcs milling cutters, convenient to replace and use.
The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Fine workmanship, clean and tidy surface, no burrs.

Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
The router bit suit for CNC router and any plunge routers with 1/2" collet..

Mill cutters are made of hard high speed steel, High toughness, abrasion resistance, high-speed cutting for the high..
hardness.rust-proof, and can be used for a long time.usually used to be assembled on milling machine..
It includes 5 sizes in one counterbore set(m3, m4, m5, m6, m8). Size：Boot x Blade Diameter x Shank Diameter x Full Length: M3=3.2 x 5.9 x 6 x 45mm, M4=4.2 x 7.4 x 6 x 48mm ,M5=5.2 x 8.9 x 6 x 51mm, M6=6.2 x 10.4 x 8 x 58mm, M8=8.2 x 13.4 x 12 x 67mm..
The cutting hole and the bottom hole of the tool have high alignment accuracy, reduce the time for changing tools, improve production efficiency and save mold making time..
It can be processed directly or finely processed to the heat treatment mold. Suitable for grinding copper, aluminum, steel, cast iron, etc., usually used for assembling on a milling machine..

Keo metric woodruff keyseat cutters are extremely versatile profile milling cutters.

High speed steel straight tooth Woodruff keyseat end mill.
Straight tooth cutters cutting standard and woodruff keyways in steel and other ferrous materials..

【Scope of Application】 The bench grinder is used for grindering. Suitable for different kind of cutters, such as drill bit, lathe bit,end mill by using different acceories.Suitable for cutting edge milling machine, cutting plotter, line cutting machine, computer engraving machine, marking machine, etc..
【Good Performance】High grinding precision, flexible rotating parts, low vibration and low noise. The tool holder part is equipped with bearings and is wear-resistant..
【Save Cost】The grinding indexing head can be operated in a variety of positions to facilitate grinding any angle and shape, realize the multi-purpose function of one machine, and save costs for companies with multiple tool repair needs..
【Main Accessories】1. 5 types R8 Collects：0.15”=4mm, 0.2”=6mm, 0.3”=8mm, 0.4”=10mm, 0.5”=12mm；2.White steel grinding wheel: suitable for grinding high-speed steel tools.3.Alloy grinding wheel: suitable for grinding tungsten steel and carbide milling cutters..
【Parameter】Grinding Dia.：ф0-100mm(0-3.94″)；Taper Angle:0°-180°；Relief Angle:0°-45°；Negative Angle:0°-26°；Grinding Spindle；5200r.p.m.；Cup grinding wheel:100x50x20mm(3.9*2.0*0.8″)..

Involute Gear Milling Cutters - High Speed Steel - 14 1/2 Degree Pressure Angle - Form Relieved.
Cutter Number: 7 - Diametrical Pitch: 12 - Hole Size: 1 1/4 - Dia: 2 7/8.
These cutters are designed to mill spur gears having a 14 1/2 degree pressure angle. They may be sharpened repeatedly without changing the original form.

Involute Gear Milling Cutters - High Speed Steel - 14 1/2 Degree Pressure Angle - Form Relieved.
Cutter Number: 2 - Diametrical Pitch: 10 - Hole Size: 1 1/4 - Dia: 3.
These cutters are designed to mill spur gears having a 14 1/2 degree pressure angle. They may be sharpened repeatedly without changing the original form.