Reviews Middle Screw

The Fuse Box

  • ✔️[CONVENIENT INDICATION]When a blown fuse is detected, The related red LED warning light will light up immediately, Remind you to check and replace the blown fuse..
  • ✔️[STRUCTURE]6-way block fuse is applied to ATC/ATO (Middle Size) fuses, Which has positive & negative side, Meaning for every positive terminal screw there's a negative terminal screw ..
  • ✔️[SUPERIOR MATERIAL]Fuse box made of environment friendly PBT material，clear fuse protection cover Insulating cover with black push latch system, easy to open the cover by pressing it. Also this transparent design also helps to add extra protection to your fuse box & fuses,The fuse box holder has LED light indicators and a strong construction.It meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant.
  • ✔️[CONVENIENT STICKER LABEL]Comes with multifunctional DIY sticker According to the name on the sticker, You can immediately identify which appliance is going wrong, Convenient for examination and repair, Easy to troubleshoot in outdoors and save time.
  • ✔️[WIDE APPLICATION]Widely used in 1 2V/24V car, autos, buses, tankers, ship, marine, truck, vehicle, SUV, yacht, RV, boats etc..
Check Stock

Drywall Anchor Kit Hollow Wall Anchors Plasterboard Plugs Screws Butterfly Expansion Tube Pipe 50 Set for Curtain Gypsum Board Wall Installation Fastener Hardware(Grey)

  • 【Plastic wall anchor set】 Anchor screw kit contains 50 butterfly expansion plugs, 50 Stainless Stell Metal Screws, meet your needs in quantity..
  • 【High Quality Material】 The drywall anchors is made of durable plastic , drywall self-drilling screws kit is made of high quality stainless steel,not easy to be broken,good toughness, high expansion.
  • Scope of application】Drywall self-drilling screws kit is suitable for gypsum board, decorative panel, asbestos board, hollow board,etc.Perfect for hanging a wall shelf on drywall.Good for curtain installation, lamp art pendant installation, etc..
  • 【Easy to Install】Pre-drills precise hole in gypsum wall board - No hole preparation required.Fold the anchor in middle, insert into a hole, and tap flush. Thread a screw through your fixture and into the anchor, when tightening the screw, the plastic anchor will expand..
  • 【100% Service Guarantee】We offer a 90-day return service. If you have questions, please contact our customer service send us an email immediately, Your satisfaction is very important to us!.
Check Stock

TOAZOE 11\ Adjustable Robust Articulating Friction Magic Arm Clamp Holder Mounts Kit for DSLR/Mirrorless/Action Camera/Camcorder/LCD Monitor Video Vlog Rig w/Smartphone/iPhone/GoPro/Arlo etc

  • ✅11-inch mini magic arm, made of aluminum alloy & stainless steel, with high-end aluminum polished, maximum load weight is 2kg / 4.4lbs, a perfect camcorder mount.
  • ✅Adjustable ball head design on both ends with standard 1/4-screw, provide multi-angle shooting, suitable for monitor DSLR camera, camcorder, action camera, DJI OSMO ACTION, video camera, photographic light, tripod, slide car Equipment.
  • ✅Meshing teeth design in the middle, provide more stability and security , easily tighten the joint of magic arm by turning the hi-torque screw.
  • ✅Super clip made with non-slip rubber pad inside, increase the friction and reduce the scratch of the pole, more stable and secure, work with 50mm diameter pole in max..
  • ✅Attach with high-torque screw, gopro adapter, super wide smartphone clip, compatible with gopro or gopro-action camera and most of the smartphone in the market..
Check Stock

Curtain Rod Coupler Support Unfinished Pine 3\ Projection Renovators Supply

  • Curtain Rods that aren't flimsy are hard to find. Pick out your premier Curtain Rods and accessories here today..
  • Add extra support to your curtain rod set, 3 in. proj. x 2 1/2 in. wide.
  • Add a coupler in the middle to support 2 rods.
  • Coupler comes with screw affixed to back.
Check Stock

11" Adjustable Robust Articulating Friction Magic Arm Clamp Holder Mounts Kit for DSLR/Mirrorless/Action Camera/Camcorder/LCD Monitor Video Vlog Rig w/Smartphone/iPhone/GoPro/Arlo etc

  • 11-inch mini magic arm, made of aluminum alloy & stainless steel, with high-end aluminum polished, maximum load weight is 3kg / 6.61lbs, a perfect camcorder mount.
  • Adjustable ball head design on both ends with standard 1/4-screw, provide multi-angle shooting, suitable for monitor DSLR camera, camcorder, action camera, DJI OSMO ACTION, video camera, photographic light, tripod, slide car Equipment.
  • Meshing teeth design in the middle, provide more stability and security , easily tighten the joint of magic arm by turning the hi-torque screw.
  • Super clip made with non-slip rubber pad inside, increase the friction and reduce the scratch of the pole, more stable and secure, work with 50mm diameter pole in max..
  • Attach with high-torque screw, gopro adapter, super wide smartphone clip, compatible with gopro or gopro-action camera and most of the smartphone in the market..
Check Stock

GPM For Traxxas E-Revo 2.0 VXL Brushless (86086-4) Upgrade Parts Aluminum Full Suspension Arm Set (Front+Rear & Upper+Lower) - 8Pc Set Blue

  • Made from high quality aluminum 6061T6 for greater support and durability. Delrin collars are inserted to minimize gap and friction for a smooth and stable drive. 3D streamline design and anodized with scratch resistant vibrant alluring colors. The stainless steel ball is fixed by our special screw locking design for better security. Dual positioning holes for adjusting the stainless steel balls and the angle of rear knuckle arms to suit different road conditions..
  • Special note : Use cap head screws when setting stainless steel ball in the outer positioning hole. When setting stainless steel ball in the middle positioning hole, use set screws to tighten top and bottom to assist the installation..
  • Accessories included : Stainless Steel Cap Head Screw 3x10-8pcs.
  • Stainless Steel Round Head Screw 3x16-4pcs.
  • Original stock part number : 8631 + 8632 + 8633 + 8634..
  • Will fit : 1/10 Traxxas E-Revo 2.0 VXL Brushless (86086-4).
Check Stock

Curtain Rod Coupler Support Antique Pine 3\ Projection | Renovator's Supply

  • Curtain Rods that aren't flimsy are hard to find. Buy your premier Curtain Rods and accessories here today..
  • Add extra support to your curtain rod set.
  • Add a coupler in the middle to support 2 rods.
  • Coupler comes with screw affixed to back.
Check Stock

Neewer Metal Heavy Duty Video Camera Tripod Fluid Drag Pan Head with Sliding Plate and 2-Section Adjustable Handle for Tripod DSLR Cameras Video Camcorders Shooting Filming，Load up to 11 LBS/5KG

  • Fluid Drag Tripod Head: Compatible with Manfrotto 501HDV release plates, the fluid head is made of ultra-high-strength metal, solid and stable with....
  • 1/4 Inch Quick Release Plate: Comes with one detachable 1/4 inch quick release plate, it is suitable for connecting to most DSLR cameras, camcorders,....
  • 3/8 Inch Bottom Screw Thread: The bottom of the ball head is designed with a 3/8 inch screw thread (included with 3/8 inches to 1/4 inch screw....
  • 360 Degree Swivel: The angle can be adjusted by the sphere in the middle, and there are 4 knobs for fixing and locking (QR plate locking knob, ball....
  • Removable Handle: It comes with a non-skid lightweight handlebar, convenient turn the ball head with the handle, easy to set up and takedown from left....
Check Stock

M6 Hex Socket Head Cap Bolts Nuts Screws Assortment Set 304 Stainless Steel Allen Socket Drive Machine Screws (M6 Assortment Kit)

  • WHAT YOU WILL GET: Our hex scocket button heap cap screws kit include 10mm,16mm,20mm,30mm,40mm Allen head machine screws, 34 pieces in 5 different dimension,34 pieces hex nuts ,and 1 piece wrench..
  • 304 STAINLESS STEEL :These hex socket head cap screws made of high quality 304 stainless steel. High temperature, corrosion and rust resistance. High quality stainless steel also ensures the durability of the screw,which can be used for a long time without frequent replacement..
  • Screws Standard: This is a metric machine screws assortment kit. The nominal diameter is M6 (6mm), indicating that their screw diameter is M6 (6mm). The thread pitch is 1.0mm, which means that the axial distance between the two adjacent teeth on the thread on the middle diameter line is 1.0mm..
  • WIDE APPLICATIONS:These hex button head bolts and nuts assortment kit serves a wide range of use and for professionals, amateurs, landlords, repairmen, other DIY . The set is perfect to replace broken and missing bolts..
  • PACKAGE:This screw assortment kit packed in a plastic storage case for organization and portability,and comes with a dimension chart for distinguishing different sizes easily..
Check Stock