Reviews Micrometer Gauge Set

Mahr Federal EGH-1028 Surface Analyzer Groove Bottom Probe, 10-Micrometer Radius

For use with Mahr Pocket Surf series portable surface roughness gauge (sold separately).
Groove-bottom probe for gauging recesses with maximum depth of 6.35mm (0.25").
90-degree conical diamond stylus for two-dimensional tracing.
10 micrometer (0.0004") radius stylus for use with rough surfaces.
Measures average roughness (Ra), mean depth (Rz), and maximum depth (Rmax) parameters.

The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..

Working Principle - Double action handles are rigidly attached to the contact plungers and are automatically self-centering..
Function - Assist in quick checking of holes, slots and recess up to 6 inch deep..
Scope of Application - Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
Advantage - The ends of both contact are head treated steel and precision ground to a radius allowing proper clearance on the smallest hole the gauge will enter..
Super Quality - Self centering telescoping gauge has high rigidity, good wear resistance, durable in use..

Ultra thick 18 gauge 12v male power pigtail cable are thicker than other 22 gauge pigtails wire, which can be used for higher current devices, the max....
SIM&NAT 18 gauge stranded tinned copper wire - Single strand on the micrometer is 0.008" and there are 24 strands for each cord.(Total 48 strands for....
end of the dc power pigtail cables are pre-tinned making them super easy to solder, which is widely used for CCTV systems, surveillance, part....
Outside of barrel (Blue wire) - Negative.
Package Included: 10 * 2.1mm x 5.5mm Female pigtail connector wire.
6 months full refund without any hassle..

All the features of the Bench Rest Seater Die plus a Micrometer for adjusting bullet seating depth.
Micrometer allows fine-tuning in either direction.
Gradations at increments of .001″ are clearly marked.
Eliminates much of the trial and error that was once associated with seating accurate rounds.
Bright, white markings make micrometer easy to read.

0.01mm Stage Micrometer Microscope Micrometer.Material: optical glass.Size: 75mm x 25mm x 1mm. Total length of scale is 1mm that is subdivided into 100 divisions，each division is 0.01mm.
0.1mm High Precision Ocular Micrometer. Material: optical glass. Div.x: 0.1mm；y: 0.1mm，10mm/100.

Our Micrometer Seating Die gives you exact bullet seating length and minimal run-out.
Has a micrometer adjustable seating head for precision bullet seating length.
If you want to change your bullet seating depth a few thousandths of an inch, simply turn the micrometer head to the required setting.
Its floating bullet seating punch centers the bullet on the case and eliminates excessive run-out.
Made of corrosion resistant stainless steel which protects it from rust and keeps it looking like new for a lifetime of use.

1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
1x True Micrometer Air Regulator with Gauge.
This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting..
It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications.
Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..

1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
1x True Micrometer Air Regulator with Gauge.
This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting. Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications..
Please Note: The pre-installed nozzle will be tightened to ensure the air tightness. While removing the nozzle, it may need some effort to disassemble.
Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..