Reviews Micro Servo Dxw90

Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control

100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Mini servo SG90 is tiny and lightweight with high output power..
SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
SG90 9g servo support Arduino,Futaba, JR, Sanwa and Hitec remote system..

Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino project..
Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum....
Amplifier Type: Analog controller. Operating Voltage: 4.8V～6.0V.
NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW....

Micro servo motor is designed for 3D F3P airplane. Easy to install and disassemble.
Digital micro servo is fast and precise to react, which can achieve the best control state when used with RC models.
Mini gear servo is high efficiency, low noise and low power consumption during operation.
Metal gear rc servo Gear is made of high-quality materials, very wear-resistant, light weight, can not be easily damaged.
Plastic gear is shock resistant and durable, practical, stable performance.

SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum angle: 120°.
Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 7 microseconds.
Amplifier Type: Analog controller. Operating Voltage: 4.8V～6.0V.
Please Note: The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support.

★Application Fields: Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys.
★Interface Type: compatible with JR & Futaba interface.
★Operating Speed: 0.12sec/60 degree(4.8V)~0.1sec/60 degree(6.0V).
★Operating Voltage: 4.8V~6.0V,Amplifier Type: Analog Controller,Dead band width:5μs.
★Package Content: 10 Pcs SG90 mini micro servo.

Type: 4 Packs SG90 9g Gear Micro Servo, Contains steering gear, rocker arm, screws, etc. all original accessories..
No Load Operating Speed: 0.12s/60degree (4.8V).
0.10s/60degree (6.0V), Stall Torque: 1.6 kg.cm (4.8V), Dead Band Width: 5usec, Operation Voltage : 4.8V - 6V.
SG90 steering gear plastic gear, fast response, accurate angle, large torque, small internal resistance, smooth and delicate, not easy to get stuck..
Adopting ordinary micro motor, low pull force, recommend applying to ordinary small electric aircraft models, not recommended for use with larger fixed-wing and electric helicopters..
Ideal for fixed wing, helicopter, KT, fluttering, gliding, small robots, robots and other models. Recommend Model: Mini Car / Mini Ship / Helicopter & Airplane..

SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of RC Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 0.01 sec/60(4.8V ) 0.08 0.01 sec/60(6V). Maximum angle: 120.
The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
Support for Arduino,Futaba, JR, Sanwa and Hitec remote system..

✔️【High Speed Servo】Torque: 1.7kg-cm/4.8V.
0.08sec/60°/6.0V Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec.
✔️【High performance】rc helicopter servo.Precision metal gears forms a strong and solid framework..
✔️【High-strength】M0090 RC Servo Suitable for use in planes, helis, cars and robots. Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec. Interface Type: JR .
✔️【Metal Gear Servo Motor】Over-spec refined design out performs ordinary micro size servo.Weight:13g / 0.5oz (not include wires weight).
Dimension:22.4*12.5*22.8mm³ / 0.9*0.5*0.9in³.
✔️【Good Quality Servo】Strict production and quality control of plastic components.High reliability,good stability,strong adaptability, Low noise,small vibration,smooth operation long life.

BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..