Reviews Metric Tapping Tool

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

420 Pcs M3 Flat Head Wood Screws Assortment Kit Phillips Drive Countersunk Head Self-Tapping Fasteners Screws Carbon Steel Wood Screws Contains 20 Pcs M6 Screw Anchors Black

  • Excellent Material: Our cross head self tapping screws are made of excellent carbon steel material with smooth edges and high hardness, which are corrosion resistant, rust resistant, not easy to damage or break, sturdy and durable for long time use..
  • Easy to Use: The deep and clear thread can easily penetrate wood and plastic for a secure grip and is not easy to deform and slip during use. These pan head screws are ideal for use in tight areas where the head needs to be flush or below the surface..
  • Easy to Store: The wood screw assortment includes some common metric sizes, all kept in a plastic box for protection, to avoid mixing is organized for you. different sizes in different compartments for easy transport and storage..
  • Widely Used: These self-tapping screws are widely used in professionals, amateurs, household and office appliances, workplace fasteners, electrical products, communication equipment, ship assembly, machinery, furniture, other maintenance, DIY arts and crafts, etc..
  • Package Contents: You will receive 400 pcs black M3* (6mm/8mm/10mm/12mm/16mm/20mm/25mm/30mm) size concrete screws, 50 pcs per size and 20 pcs M6 plastic anchors, in total 420 pieces, a very essential family hand tool and perfect for replacing lost or broken screws..
Check Stock

420 Pcs M3 Flat Head Wood Screws Assortment Kit, Phillips Drive Countersunk Head Self-Tapping Fasteners Screws, Carbon Steel Wood Screws, Contains 20 Pcs M6 Screw Anchors (Copper)

  • Excellent Material: Our cross head self tapping screws are made of excellent carbon steel material with smooth edges and high hardness, yellow zinc plated finish, which are corrosion resistant, rust resistant, not easy to damage or break, sturdy and durable for long time use..
  • Easy to Use: The deep and clear thread can easily penetrate wood and plastic for a secure grip and is not easy to deform and slip during use. These pan head screws are ideal for use in tight areas where the head needs to be flush or below the surface..
  • Easy to Store: The wood screw assortment includes some common metric sizes, all kept in a plastic box for protection, to avoid mixing is organized for you. different sizes in different compartments for easy transport and storage..
  • Widely Used: These self-tapping screws are widely used in professionals, amateurs, household and office appliances, workplace fasteners, electrical products, communication equipment, ship assembly, machinery, furniture, other maintenance, DIY arts and crafts, etc..
  • Package Contents: You will receive 400 pcs yellow M3* (6mm/8mm/10mm/12mm/16mm/20mm/25mm/30mm) size concrete screws, 50 pcs per size and 20 pcs M6 plastic anchors, in total 420 pieces, a very essential family hand tool and perfect for replaci....
Check Stock

DelitonGude Metric M5 Machine Screw Tap 10pcs 5% Cobalt Spiral Flute Drill Taps Metric M5 Thread Tapping Tool(M5)

  • Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.The surface was nitrogen treated,which does't rust, very durable.Size:M5X0.8mm.
  • Used to make new threads or re-thread damaged or jammed threads.Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly..
  • Spiral Flute design, well chip removal, Easy tapping.With spiral flute taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency.
  • because the chips are unobstructed, the chips will not be blocked in the narrow flutes..
  • Strong Box package Included: 10Pcs Spiral flute Metric Taps.
  • Suitable for taping Blind hole,Such as Steel Cast Iron, Aluminum Alloy and other non-heat treater Metal,Hardness less than HRC30..
Check Stock

uxcell Metric Machine Thread Milling Tap M16 x 2 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

  • Thread Size: M16 x 2. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
  • The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
Check Stock

uxcell Metric Machine Thread Milling Tap M8 x 1.25 H2 Titanium Coated Ti-coated High Speed Steel 3 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

  • Thread Size: M8 x 1.25. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
  • The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Metric Machine Thread Milling Tap M12 x 1.75 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

  • Thread Size: M12 x 1.75. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
  • The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock