Reviews Metric Adapters

MASTERCOOL 72485-PRC Universal Hydraulic Flaring Tool Set Includes 3/8 and 1/2 Transmission Cooling Line Die and Adapter Sets with Tube Cutter Silver/Blue

TUBE AND DIE SET STABILIZING ARM for easy tube forming.
MAGNETIC ADAPTER HOLDER keeps adapters in place.
EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies.
CAN BE USED ON "annealed steel" & "dead soft".
INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8".
GM fuel line flare, brake lines and transmission 5/16 and 3/8".
flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
metric bubble flare 4. 75, 6, 8, and 10mm.
GM transmission cooling line 3/8" and 1/2".
mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O. D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case.

AQUAH natural gas tankless water heater, 3.2 gal (12 L)/min or 192 gal/hr.
Automatic electrical pulse ignition with no standing pilot, operated by 2 D Batteries or 120V AC.
85% thermal efficiency, 24,000 Watt / 81,946 Btu/h thermal input.
45 dgrees temperature rise at the flow rate of 3.2 gllons per minute (GPM).
Free 1/2" BSP (Metric) to 1/2" NPT adapters for gas/water fittings ($45 value)..

Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.

AQUAH liquide propane gas tankless water heater, 1.6 gal (6 L)/min or 96 gal/hr.
Automatic electrical pulse ignition with no standing pilot, operated by 2 D Batteries.
85% thermal efficiency, 12,000 Watt / 40,900 Btu/h thermal input.
45 dgrees temperature rise at the flow rate of 1.6 gllons per minute (GPM).
Free 1/2" BSP (Metric) to 1/2" NPT adapters for gas/water fittings ($45 value)..

... Round Head Design Eliminates any stripping or splitting of the wrench and ensures a snug fit on the fastener – Sizes are carved onto each wrench for easy identification – Storage Organizer included, designed specially to hold the wrench’s in place when storing or using on jobs..
✓ USES: Crow’s Feet Wrench Adapters Speed up Installations & Removals, Fitting Perfectly on any 3-8” Drive Ratchet, Extension Rod or Torque Wrench, Reaching inaccessible fasteners that sockets can’t get to – Great for Lawn Equipment, Car Automotive & Truck Work in tight Engine/Radiator Areas & Control Arms, or for underneath sink/toilet work like faucet spray hoses..

...D REMOVAL TOOL: This Orion Motor Tech inner tie rod removal tool set lets you remove and install inner tie rods without removing the rack and pinion.
the 1/2 Inch drive tube handle with a 2.2 in inner diameter allows servicing on small cars, pick-ups, and SUVs.
12 CROWFOOT ADAPTERS: The 12 crowfoot adapters cover most common SAE and metric sizes of 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm.
UNIQUE DESIGN: Our inner tie rod remover's 20 inch tube handle lets you remove and install inner tie rods in places where sockets and wrenches can’t fit.
works on inner tie rods with inaccessible wrench flats.
SUPERIOR DURABILITY: Our tie rod drawing tools and adapters are steel forged for lasting strength.
the flexible sliding collar at the top of the sleeve tightly attaches the crowd feet adapters.
the knurled handle provides firm control.
HASSLE-FEE OPERATION: Thanks to intuitive design and clear instructions our rod removal set is easy to use.
select the right adapter, slide it over the tie ....

AQUAH propane gas tankless water heater, 4.23 gal (16 L)/min or 254gal/hr.
Automatic electrical pulse ignition with no standing pilot, operated by 2 D Batteries or 120V AC.
85% thermal efficiency, 32,000 Watt / 109,260 Btu/h thermal input.
45 dgrees temperature rise at the flow rate of 4.3 gllons per minute (GPM).
Free 1/2" BSP (Metric) to 1/2" NPT adapters for gas/water fittings ($45 value)..

The Gearwrench 209 Piece Drive Master Impact Socket Set includes 1/4inch, 3/8inch, and 1/2inch drive 6 point SAE and metric, standard and deep sockets.
16 impact drive tools included - 10 extensions, 3 universal joints, and 3 adapters.
Chrome molybdenum alloy steel (Cr-Mo) for exceptional strength and durability.
Manganese phosphate finish to resist corrosion.
High-visibility laser-etched markings provide quick size identification.

The 1/4 in. Drive Master Socket Set is a complete collection of 1/4" Socket,(deep and shallow, inch and metric), 1/4" 72 fine-tooth ratchet, Adapters, 3"& 6" Extensions and 1/4’‘ Dr. Bits Set, organized in one convenient impact-resistant tool case.
This 1/4" Socket Set Includes 46 pcs sockets in SAE and metric, deep and shallow, from 4mm to 14mm, 5/32-Inch - 9/16-Inch, 6 points, high torque, Cr-V sockets..
All tools are made from premium quality chrome vanadium steel with a mirror chrome finish that resists corrosion.
It comes with a durable blow-molded carrying case for easy transportation, safe storage, and quick organization.
Meets or exceeds ANSI performance standards. It comes with 1 year quality warranty.