Reviews Metalworking Tubing

Rapid Repair RP77271 1/8 Inch to 1-5/8 Inch Outside Diameter Pipe and Tubing Reamer, Red (Single Pack)

Removes burrs on tubing from 1/8 inch to 1-5/8 inch outside diameter.
NOTE FOR USE: Little pressure is needed to deburr smaller pipe and tubing, too much force will cause damage to the pipe or tubing.

Slowly waters the soil around your plants for complete root zone hydration.
Ideal for short runs on flat surfaces, such as vegetable gardens, borders, and around small plants.
Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170 in..
connects to ½ in., 5/8 in., or 0.710 in. supply line with ¼ in. micro fitting such as a barbed connector or Clamp N Pierce Connector.
As part of a complete drip irrigation system, the soaker tubing seeps out water from the entire line, keeping soil moist.
Flexible tubing bends to accommodate curved irrigation areas as well as straight runs.
Porous non-pressure compensating material gently seeps water out of the entire line of tubing.
Comes with one 50 ft. coil of ¼ in. Soaker Tubing.
in cold climate areas, no need to winterize—the soaker tubing can be left in place or covered in soil or mulch, excess water will gradually seep out.

Fantastic tool and is a ‘must have’ for making custom fabricated tube chassis, roll cages and header/exhaust work.
Works well with 9/16" to 2" O.D. tubing, useful in joining different sized tubing.
Ideal for anything that you need to put an angle onto the end of either round or square tubing for tight notches and perfect fit.
Incorporates and includes a built-in protractor gauge to quickly and easily set the degree angle of the tubing where end matches up to mating tubing.
Takes the challenges and difficulty out of making 40° to 90° angled tubing joints and makes angled tubing joints quickly and accurately.

COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking..
FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
5PC SET - The set includes 5pcs of 3/8” diameter M35 grade cobalt steel twist drill bits, packed in a convinient and reuseable PVC case for easy storage and carrying. Manufactured to German DIN338 standard..
DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers w....

Jaw width: 4 inch , Mix opening:4.33 inch.
Professional designed for woodworking, metalworking, sawyer, drilling, and gluing assistanty installation: easy to install on workstation.
Easy installation: easy to install on workstation.
Please use it on drilling and milling machine.