Reviews Metal Truss Connector

Ozark Trail 10' X 20' Straight Leg Instant Canopy Middle Truss Bar of Outer Section Replacement Parts

  • PLEASE MEASURE THE LENGTH OF YOUR TRUSS BAR BEFORE ORDERING!re) No other parts Included..
  • Included: Metal - ONE ( X ) MIDDLE TRUSS Bars Set of Outer Section (Exactly as shown in picture) No other parts Included..
  • PLEASE NOTE: This truss does Not attach to the Corners. It attaches on the Middle as shown in picture..
  • for Ozark Trail 20' x 10' Straight Leg Instant Canopy or any brand have same dimensions and specification.
Check Stock

Coleman 10 x 10 Instant Sun Shelter & Swingwall Straight Leg Canopy Side Truss BAR 39 3/4" Replacement Repair Parts

  • PLEASE MEASURE THE LENGTH OF YOUR TRUSS BAR BEFORE ORDERING!.
  • For Coleman Instant 10' x 10' Straight Leg Canopy (Model: 2000023868) or any brand have same dimensions and specification.
  • PLEASE NOTE: This truss does Not attach to the Middle. It attaches on the corners as shown in picture..
  • Included: Metal - ONE ( X ) TRUSS Bar Set (Exactly as shown in picture) No other parts Included..
Check Stock

#8 x 1/2\ Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal Attaches Wire Lath to Metal Studs - Box of 100

  • HIGH QUALITY ZINC-PLATED STEEL: Phillips Modified Truss Head Sheet Metal Screw made of 100% high quality durable steel with hard Zinc Plating, built to last years with no wear and tear.
  • RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener.
  • CONVENIENCE: Phillips Modified Truss Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications.
  • For use in Sheet Metal Steel, Attaches Wire Lath to Metal Studs or Metal or Aluminum to Metal or Aluminum. Installed with #2 Phillips Driver.
  • Amazon Protected Money-Back Satisfaction Guaranteed.
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

DZS ELEC 2pcs Martin Folk Guitar Allen Wrench Tool 4mm / 5mm Truss Rod Wrench for Martin Acoustic Guitar Truss Rod Adjustment

  • Package includes: 1 x 4mm Truss Rod Wrench + 1 x 5mm Truss Rod Wrench.
  • The product is made of metal, durable and highly wear-resistant.
  • L-shaped truss rod, easy to insert into the sound hole and adjust the neck.
  • L-shaped adjusting wrench can adjust the guitar neck straightness. It is suitable for all models of Martin Martin Martin and some brands of folk classical wooden guitars.
Check Stock

FixtureDisplays® Curved Podium Truss Metal/Wood Pulpit Lectern with A Cup Holder 11568-H

  • FixtureDisplays Curved Podium, Truss Metal/ Wood Pulpit Lectern With A Cup Holder 11568-H. Curved truss metal and wood podium, black in color. This....
  • The structure is sturdy yet very contemporary. Fine workmanship! This podium is an ideal design for speeches, lectures, sermons. Features with curved....
  • Length*Width*Height: 23.6"x 16.1"x 46.9"( 60*41*119 cm). Height faces to audience is 46.9".
  • Height faces to speaker is 42.5". Top panel measures 23.6"....
  • Need a custom logo? Email your logo file for quote. Sales 8 FixtureDisplays Doubt Calm. A 10.5" logo plaque laser etched generally runs about $150....
Check Stock

FixtureDisplays Truss Metal and Wood Podium 28 Wide Top Pulpit Lectern with A Cup Holder 11566

  • This black metal and wood truss lectern podium is ideal for schools, churches, conferences, events, funeral homes..
  • Pulpit is very Easy set up. Top is 28" wide, give you plenty of space to place your laptop, bible, materials while you give your speach or sermon..
  • Black melamined MDF top and base, with powder coatd metal truss leg support. The structure is sturdy yet very contemporary..
  • Come with a cup holder, great for speakers pastors to put a glass of water on. Fine workmanship! Measurement: 28" wide x 16" deep x 47" tall. Weight:....
Check Stock