Reviews Metal Ssd Case

XANAD Case for Samsung T5/T3 SSD 1TB 2TB 500GB 250GB Within Size 3 x 1.2 x 1 Portable External Solid State Hard Drives Not fit Samsung T7/T7 Touch - Travel Carrying Bag Inside Grey

Greater Capacity : The inner design of XANAD case have enough space to storage your Samsung T5 / T3 SSD and its accessories, like usb cable..
Assured Protection : The interior is made of super-elastic VELVET and the exterior is made of high quality EVA material , which can protect the ssd....
Perfect Travel Carrying Case : Comes with comfortable Strong Handle to carry easily and this hard case is lightweight and compact to fit in your bag ,....
Perfect Fit ：The case is tailored for Samsung T5 / T3 SSD . Size : 5.3 x 3.5 x 1.2 inch , weight : 86.7g / 0.19 lbs ..
Packing Include: Case only (the samsung ssd and cable is not included).

This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
The 0.96 inch OLED screen was already mounted on the case.28x64pixels, default I2C address: 0x3C.
M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x QC 3.0 Power supply,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).

Work with Regular Computer Case: Widely compatible with different desktop computer cases. With the bracket you can mount a 2.5” hard drive to the 3.5” hard drive slot in a computer case..
Work with Mac Pro 2019: Can be mounted to a Mac Pro 2019. With this mounting kit, you can install 2 x 2.5” SSDs/HDDs in Mac Pro 2019..
Dual Hard Drive Installation: Supports installing 2 x 2.5” SSD/HDD. A single hard drive is also applicable..
Metal Strip Support: Put your hard drive on the metal strip support, and turn the screws into the holes on the two sides of the hard drive. No need for holding the hard drive manually..
Easy to Install: For Mac Pro 2019, lead the bracket into the computer case via the slideways and fix it from the outside with screws. For a regular computer case, you can install the bracket with screws..

intel Haswell i7 4th Generation CPU, Dual Core, 4M Cache.
16GB DDR3L RAM, 512GB mSATA 3.0 6Gbps SSD..
intel HD4400 Graphics, 3200*2000 Resolution supported.
2xLAN, 2xHD Ports, 1xSPDIF OUT, 4xUSB 3.0, 4xUSB 2.0, Audio in/output, Card Reader.
Smart Design, Fanless, Metal Case, Silent working, High Speed CPU and SSD, 2 Year Warranty.

Geekworm NASPi offering an easy and fast way to create your home media center and building NAS or Web server for your raspberry pi 4 with a 2.5 inch SATA HDD/SSD..
NASPi is composed of three parts: X823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case to get a complete NASPi.
How to Power: 5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1).
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
SSD Thickness Description: NASPi supports SSD with a thickness not exceeding 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick..
How to Make the PWM Fan Work: PWM fan needs a PWM signal to start working, so need to install shell script (refer to above wiki), If the fan does not work in third-party OS, only remove the yellow wire of fan to let the fan run immediately..

【Multiple Transmission Protocol 】ORICO M.2 NVMe SSD external case adopts dual-chip master which support USB4.0 and fully compatible with Thunderbolt 3/Thunderbolt 4 USB3.2/3.1/3.0/Type-C (USB2.0 and below not compatible)..
【40Gbps High Speed 】With USB4.0 Type-C output interface, it supports the maximum transmission speed up to 40Gbps. The measured maximum continuous read speed can reach 2700MB/s, and the continuous write can reach 1400MB/s.（This data comes from ORICO laboratory. Please note that the speed is different in different environments.）.
【Only for M.2 2280 NVMe SSD】ORICO M.2 SSD Enclosure is specially designed for M Key & B+M Key NVMe SSD up to 2TB capacity. The applicable SSD size is 2280. (Does not support NGFF SATA M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD.).
【Easy to Use】You just loosen the screw of the cover, put your SSD gently into SSD external housing, then fix the cover with a screw and connect cable to start work. Plug and play. No driver needed. Compact and portable. Easy to carry with lanyard hole..
【Universal Compatibility】ORICO M.2 SSD case includes supports Windows/ Mac / Linux system, not only for PC and laptop, but also for smart TV, smart router and PS4 etc. NOTE: To achieve thunderbolt speed, please use thu....

Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop.
50mm (1.8 inches) MSATA SSD to 2.5 inches Notebook IDE Adapter with case..
This adapter using JM20330 Serial ATA Bridge Chip..

[10 different size screws]: use for 2.5" SSD, hard drive,computer case, power supply, motherboard, hard drives, fan and floppy,CD-ROM drives.
[Style]:hard driver screws(M3.5x5mm),hand twist case screw,Main board fixed screws (M3 x 5),CD-ROM set screws (M3 x 4),fan screws(M5x10),case screws screw (M3.5 x 6),M3 washers,2.5" M3 ssd screws.
[Material]: Made of high quality black zinc plated which have superior rust resistance and excellent oxidation resistance.
[Application]:Perfect for 2.5" SSD, Hard Drive, computer case, power supply, Mainboard/motherboard, fan and floppy/CD-ROM/DVD-ROM drives.
[Total]: 736pcs computer screws with a storage box.great for PC building hobbyist.