Reviews Metal Push In Fitting

Dixon Valve & Coupling 270AT Tool for Push-On Fitting, 13-1/2\ Length x 2-3/8\ Width x 7\ Height

Cuts push-on style hose and inserts the fitting.
Built-in cutter slices through 1/4" - 3/4" ID reinforced push-on hose without fraying.
Clamp hose into tool's vice and apply light pressure on handle to drive in the fitting.
Tool has four 7/16" diameter mounting holes for bench mounting.
Measures 13-1/2" length by 2-3/8" width by 7" height.

...p to 120PSI. When the pressure drops to 90 psi, the compressor will kick on and pump back up to 120PSI. And comes with 2 vibration pads to install under each leg when mounted, a 30 amp fuse, a petcock style tank moisture drain, and 3'ft of 3/8" air hose for the air horn hook-up that is to be used with the push lock fitting on the side of the air tank connecting to the push lock fitting on the air horn..
【EASY TO INSTALLAT】It’s super easy to install!First,you fix the motor to a certain position on the car with a nut, then fix the horn tube horizontally outside or in the engine, It's flexible and portable..
【 WIDELYAPPLICATION】Trumpet Air Horn Compressor Kit Can be mounted on cars, trucks, vans, tractors, motorcycles, boats or any application that has a 12V DC power available..

[Ring LED 12mm Latching Push Button Switch] Push it - ON, Push it again - OFF. Contact Configuration: 1NO1NC.
[Aluminium Alloy Shell High Round Pushbutton Switch] 12mm 1/2" Mounting Hole, durable for a longer lifetime can up to 500,000 cycles..
[Easy to Install] Round latching switch with screw clamp type terminals to make fitting very easy, 4 pins, multi-type wire connection. The LED light can be on all the time or only on when the switch is in on mode, depending on how you wire it..
[Wide Application] High-quality metal material & IP65 waterproof protection can be used in a wet or dusty environment. This 12V push button switch is suitable for almost any motorized vehicle of motor starting, power starting devices, and can also be an access control button..
[Quality Assurance Service] If you're not COMPLETELY SATISFIED with Linkstyle pushbutton switch, please feel free to contact us without hesitation, we provide a free return, a free replacement, or a full refund. NOTE: In order to avoid unnecessary misunderstandings, please read the relevant dimensions and parameters carefully..

Push fit fittings,Quick Connect Fitting 1/4" RO Water System.
Standard fitting for water filter systems using 6mm water filter tubing.
Easy to use,Mini quick connect push tee 1/4-Inch OD.
Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc.

Push-on fitting are intended for use with Lok-On (push-on style) hose only.
Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
3/8-inches NPTF male and 1/4-inches hose ID barbed.

Push-on fitting are intended for use with Lok-On (push-on style) hose only.
Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
1/4-inches NPTF male and 5/16-inches hose ID barbed.

【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
【Easy to install】: Our air fitting kit quicks....