Reviews Metal Parts As Per

REV X ZDDP Oil Additive - Zinc & Phosphorus 5 Pack

  • Creates an anti-wear layer at friction points to prevent metal-to-metal contact and eliminate wear..
  • Engine break-in where the new camshaft and lifters need extra protection, and ZDDP is perfect for that..
  • Works in both synthetic and standard mineral-based oils..
  • Two fluid ounces mixed with 6 quarts of oil create a ratio of 3000 – 3200 parts per million (ppm)..
Check Stock

uxcell Cartridge Heater AC 110V 300W Stainless Steel Heating Element 9.5mmx80mm

  • This item is most frequently used for heating metal parts by insertion into drilled holes. Easy installation, the heaters are made slightly undersize relative to their nominal diameter..
  • Use a watt density only as high as needed. Take advantage of the safety margin provided by using ratings less than the maximum allowed..
  • Various diameters allow for it to be used in any cavity and can be custom designed with any cold section. Lead wires extend from the end to your control panels..
  • Select space heaters for most even heat pattern rather than the highest possible wattage per heater..
  • Cartridge heaters are used for heating Dies, Moulds, Platens and various other applications demanding localised heating..
Check Stock

Rx Clear Calcium Plus | Granular Calcium Chloride | Raises Calcium in Swimming Pool Water | Hardness Increaser for Swimming Pools | Helps Prevent Corrosion | 25 Lbs

  • CALCIUM PLUS - Use Rx Clear Swimming Pool Calcium Booster when the calcium hardness reading in your pool drops below 150ppm. Raising calcium hardness helps prevent corrosion of metal and plaster surfaces. Also helps prevent foaming of certain chemicals..
  • BE AWARE - Do not add this product on the same day that either ph plus or alkalinity increaser has been added to the pool water. Add when water hardness levels drop below 150 ppm. Spread the product over the surface of the water while the pump is running. Do not pre dissolve this product..
  • PREVENTS CORROSION - Rx Clear Calcium Plus helps stop corrosion of metal surfaces such as light fixtures, railings, ladders, screws, pool cover components, pool heater components, and metals in your pump or filter. Also prevents etching, pitting, and delamination of concrete, plaster, gunite, shotcrete, and fiberglass pools..
  • WATER CHEMISTRY - One of the most important aspects of proper swimming pool care involves the maintenance of balanced water chemistry. When swimming pool chemicals are not at their ideal levels, swimmers can be at risk of contracting illnesses and suffering from....
Check Stock

uxcell Cartridge Heater AC 110V 300W Electric Hot Rod Stainless Steel Heating Element Replacement

  • This item is most frequently used for heating metal parts by insertion into drilled holes. Easy installation, the heaters are made slightly undersize relative to their nominal diameter..
  • Use a watt density only as high as needed. Take advantage of the safety margin provided by using ratings less than the maximum allowed..
  • Various diameters allow for it to be used in any cavity and can be custom designed with any cold section. Lead wires extend from the end to your control panels..
  • Select space heaters for most even heat pattern rather than the highest possible wattage per heater..
  • Cartridge heaters are used for heating Dies, Moulds, Platens and various other applications demanding localised heating..
Check Stock

BOSCH PS60N 12V Max Pocket Reciprocating Saw (Bare Tool),Blue

  • COMPACT POCKET RECIP DESIGN: engineered to provide balanced handling and to be able to reach into tight spaces.
  • SHORT 11.0 INCH LENGTH: ideal for difficult cuts and overhead use.
  • LIGHT WEIGHT: weighs only 2.2 Lbs. (tool only, not including battery) for less user fatigue.
  • POWER 12V MAX MOTOR: delivers up to 3,000 no-load strokes per minute, and it cuts materials such as copper and conduit.
  • DURABLE DESIGN: features a front rubber-like wrap-around boot to help protect internal parts from dust, debris, and water.
  • INCLUDES: reciprocating saw, (1) metal reciprocating saw blade and (1) wood reciprocating saw blade.
Check Stock

uxcell 2PCS Cartridge Heater AC 110V 300W Stainless Steel Heating Element 8mmx80mm

  • This item is most frequently used for heating metal parts by insertion into drilled holes. Easy installation, the heaters are made slightly undersize relative to their nominal diameter..
  • Use a watt density only as high as needed. Take advantage of the safety margin provided by using ratings less than the maximum allowed..
  • Various diameters allow for it to be used in any cavity and can be custom designed with any cold section. Lead wires extend from the end to your control panels..
  • Select space heaters for most even heat pattern rather than the highest possible wattage per heater..
  • Cartridge heaters are used for heating Dies, Moulds, Platens and various other applications demanding localised heating..
Check Stock

Bower/BCA 201CC Brng

  • 1 YEAR WARRANTY: All Febest Parts come with a 1 Year Warranty backed by great customer service..
  • ONLY THE BEST STEEL: Febest only uses the best high-carbon steel. All Febest parts that contain metal use an expensive heat treatment process that improves metal strength and performance, also our parts use a higher level of polish to allow the bearing to roll smoother and last longer..
  • ONLY THE BEST RUBBER: Each Individual component of this part is made with high quality materials. Unlike our competitors Febest uses only high quality Natural Rubber (75%) and (25%) synthetic Rubber. This means that it is more durable, will last longer, and can handle temperatures from -40 to +140 degrees. The Rubber wont rub off on your hand like the cheap replacement parts offered by competitors.
  • QUALITY IS EVERYTHING: The synthetic lubricant Febest uses is 10x as expensive as our competitors, and lasts 3x as long..
  • GERMAN QUALITY CONTROL: Febests German quality control experts ensure that all parts are of the utmost quality. We have specially developed metals and rubbers that create a super durable, and long lasting end product..
Check Stock

Bower/BCA 100CC4 Brng

  • 1 YEAR WARRANTY: All Febest Parts come with a 1 Year Warranty backed by great customer service..
  • ONLY THE BEST STEEL: Febest only uses the best high-carbon steel. All Febest parts that contain metal use an expensive heat treatment process that improves metal strength and performance, also our parts use a higher level of polish to allow the bearing to roll smoother and last longer..
  • ONLY THE BEST RUBBER: Each Individual component of this part is made with high quality materials. Unlike our competitors Febest uses only high quality Natural Rubber (75%) and (25%) synthetic Rubber. This means that it is more durable, will last longer, and can handle temperatures from -40 to +140 degrees. The Rubber wont rub off on your hand like the cheap replacement parts offered by competitors.
  • QUALITY IS EVERYTHING: The synthetic lubricant Febest uses is 10x as expensive as our competitors, and lasts 3x as long..
  • GERMAN QUALITY CONTROL: Febests German quality control experts ensure that all parts are of the utmost quality. We have specially developed metals and rubbers that create a super durable, and long lasting end product..
Check Stock

POR-15 Rust Remover - 1 gl - Rust Dissolving solution | Reusable and Biodegradable | Safe to Use On Delicate Metal Parts, Plastic, PVC, Viton, and Most Paints

  • ✅ WHY CHOOSE POR-15 RUST REMOVER? POR-15 Rust Remover will safely remove light to even heavy rust completely from metal surfaces and will not affect plastic, PVC, Viton, or most paints. Rust Remover will not harm unrusted steel and is safe on other metals. No fumes or bad odors and no VOCs and no sanding or scrubbing required. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal..
  • ✅ FEATURES - Achieve professional results without sanding or scrubbing. It’s fast acting odorless formula is water-based, reusable & biodegradable. POR-15 Rust Remover is noncorrosive and safe to use on delicate metal parts, plastic, PVC, Viton, and most paints..
  • ✅ HOW IT WORKS All of the rusted areas must be submerged in the Rust Remover for it to work. When all of the rust has been removed, rinse the metal pieces with water. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. For best results use POR-15 Cleaner Degreaser to clean parts before using POR-15 Rust Remover..
  • ✅ GREAT FOR – Automotive Parts, Farm Equipment, Gardening Tools, Camping Gear, Boat Parts & more!.
  • ✅ OUR SATISFACTION COMMITMENT - At POR-15 we strive to bring the ultimate in rust prevention. ....
Check Stock