Reviews Metal Hole Cutter

LIUDAINC Diamond Drill Bit Set Hole 5Pcs Carbide Hole Cutter High Speed Hole Saw Tooth Cutter Drill Bit Kit Deep Cut Hole Saw for Stainless Steel Metal Copper Wood 16/18.5/20/25/30Mm

  • ➤ HIGH QUALITY: This carbide teeth hole saw is made from high quality cemented carbide, ensuring its high hardness, rust proof, sturdy and durable..
  • ➤ 5PCS CARBIDE HOLE CUTTER: There are 5 hole cutters for mental with different diameter sizes, 16/18.5/20/25/30Mm which can meet your various needs..
  • ➤ VARIOUS APPLICATION: Our carbide tipped drill bits are suitable for home decoration and industrial applications, including thick metal, stainless....
  • ➤ FAST & PRECISE CUTS: This hole cutter can precisely cut smooth holes due to the excellent control of the concentricity rate..
  • I wish you a good day, a good life and a safe life, cordial greetings, sincere blessings, my best regards！.
Check Stock

Aracombie 4PCS 1-1/4 Inch to 2-1/8 Inch Hole Saw Kit for Wood, 1.2 Inch Cutting Depth Hole Cutter Drill Bit with Mandrel, Round Hole Saw Set for Cornhole Boards Plastic Drywall Soft Metal (Black)

  • Package Contains: 4 x Wood Hole Saw Kit, 4 Different Cut Size: 1-1/4 inch/32mm, 1-1/2 inch/38mm, 1-3/4 inch/44mm, 2-1/8 inch/54mm. The hole saw cutter set can be easily installed on a handheld or vertical drill, Colour: Black..
  • Wide Range of Application: Plastic hole saw has sharp teeth, which can quickly drill a smooth edge hole in wood, plastic, PVC, cornhole boards, drywall, fiberglass, thin metal and other materials. Round hole saw cannot be used to cut concrete..
  • Cost-Effective: The fiberglass hole saw cut to a depth of approximately 1 inch / 25.4mm. A set contains 4 pack circle hole saw cutter, which is very suitable for woodworking, decorators, DIY enthusiasts, and craftsmen to buy and use..
  • Material: Drywall hole saw kit is made of high quality carbon steel, which is wear-resistant and durable. This fiberboard hole saw surface is painted and the side chip hole is designed to further extend the service life..
  • After-Sales Guarantee: Aracombie has a 24-hour human customer service. If you have any questions before purchasing or are not 100% satisfied with the product, please fe....
Check Stock

6 1/8 Inch HSS BI-Metal Hole Saw 1 3/16 inch Cutting Depth Hole Cutter with Hex Shank Drill Bit Adapter for Wood Cornhole Boards Plastic Drywall Fiberboard Can Light Recessed Light Blue

  • WIDE APPLICATION: Our Bi metal Hole saw is perfect for cutting wood,plywood, plastic, drywall, soft plaster,acrylic-board and thin metal. In addition....
  • PROFESSIONAL MATERIAL: The 6 inch hole saw is made of HSS carbon steel & Bi-metal steel, which has superior performance and higher cutting strength....
  • SMOOTH CUTTING: he high-quality bi-metal blade and variable pitch sharp HSS teeth combine with Non-binding clean edge design ensures smooth and clean....
  • EXCELLENT WORKMANSHIP: This powerful hole cutter is made of M42 high-speed steel and bi-metal, with higher hardness (≥65HRC), higher toughness,....
  • CUSTOMER SERVICE: We are dedicated to providing every customer with satisfying products and services. If you are not satisfied with our hole saw, we....
Check Stock

10Pcs Leather Hole Punch Cutter 0.5mm-5mm Leather Working Tools for Leather Watch Bands Belts Canvas Paper Plastics Round Hollow Hole Punch Cutter Tool

  • ★Round hollow punch set easy to use by placing gasket hole punch over area that needs a hole and hit back end with a hammer or mallet, making distinctive artistic and aesthetics effects on leather with different patterns punchers.
  • ★Hollow punch cutter come with steel alloy material, leather hollow punch features durable sharpness, well-tempered& round cutting edge, knurled body for secure grip.
  • ★Paper gasket hole punch with milled cleaning hole and polished barrel for punching holes on handbags, pliable plastics, clothing, vinyl, cardboard, webbing, jacket or poster-board etc.
  • ★10Pcs different size can be choose Size: 0.5mm,1.0mm,1.5mm,2.0mm,2.5mm,3.0mm,3.5mm,4.0mm,4.5mm,5.0mm.Metal round leather hole puncher is suitable for falconry, hobbies, crafts, modeling, home repair etc. when making purses, file packages, vinyl or any custom leather work.
  • ★Please note:keep out of the children's reach due to sharp prong gasket cutter punching tool.Surface coating of oil to prevent rust,please clean it up before you use.
Check Stock

GJHL Drill 2-3/8 Inch 60mm Hole Saw, 1-1/4 Inch Cutting Depth HSS Bi-Metal Hole Cutter with Hex Shank Drill Bit Adapter Durable

  • 10 TIMES LONGER LIFE than normal metal cutting hole cutters.
  • Our Tungsten Carbide Tipped Cutters are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer..
  • Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
  • With normal care, tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use.
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

Diamond Drill Bit Set Hole 13Pcs 16-53Mm HSS Hole Saw Set for Metal High Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter for Stainless Steel,Copper,Iron Plastic Sheet Aluminum Plate Wood

  • ➤ HIGH QUALITY: This carbide teeth hole saw is made from high quality cemented carbide, ensuring its high hardness, rust proof, sturdy and durable..
  • ➤ 13PCS CARBIDE HOLE CUTTER: There are 13 hole cutters for mental with different diameter sizes, 53mm,50mm,45mm, 40mm, 35mm, 30mm, 28mm, 26mm, 25mm,....
  • ➤ VARIOUS APPLICATION: Our carbide tipped drill bits are suitable for home decoration and industrial applications, including thick metal, stainless....
  • ➤ FAST & PRECISE CUTS: This hole cutter can precisely cut smooth holes due to the excellent control of the concentricity rate..
  • I wish you a good day, a good life and a safe life, cordial greetings, sincere blessings, my best regards！.
Check Stock

6 1/8 Inch HSS BI-Metal Hole Saw, 1 3/16 inch Cutting Depth Hole Cutter with Hex Shank Drill Bit Adapter for Wood Cornhole Boards Plastic Drywall Fiberboard Can Light Recessed Light, Red

  • ...igh-quality bi-metal blade and variable pitch sharp HSS teeth combine with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
  • EXCELLENT WORKMANSHIP: This powerful hole cutter is made of M42 high-speed steel and bi-metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength, and stronger wear resistance. Also, Built rust-proof for repeat use. It’s cutting depth is 1.2-inch..
  • CUSTOMER SERVICE: We are dedicated to providing every customer with satisfying products and services. If you are not satisfied with our hole saw, we will provide a free replacement or full refund for you. We wanna our customers to be 100% satisfied..
Check Stock

14-Pack Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • Durable Material : The preferred material used was top-quality steel which has excellent thermal resistance.The cutting blade has a diameter of 3/8 inches, and the arbor is of standard 1/4 inch size..
  • Double Sided : Double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.when 1 side gets dull you simply have to flip the bit around on its arbor assembly..
  • Easily Separate : There is a spring-loaded pin in the center of these blades to guide the cutter to grind through the spot-welded material,drilling out spot-welds in a manner that leaves a very clean hole without distorting the sheet metal..
  • Fit For : Sharp double-sided blades for high efficiency. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets..
  • Spot Weld Cutter Tool：Easy to replace the blades when it begins to dull..
Check Stock