Reviews Metal Epoxy Primer

VHT SP652 Satin Black Epoxy All Weather Paint Can - 11 oz.

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
boat primer is chromate-free and lead-free.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
do not apply Topside Primer thicker than recommended or it may not cure properly.

...loss Epoxy Topcoat. Its Thick, Full-seal Coating Restores Countertop Surfaces to a Porcelain-like, Hard, “Like New” Bright Gloss. Long-lasting, Super-adhesion, Water-Resistant, Never peels and No yellowing!.
Easy DIY Project - Simple 3 Steps Application - Roll on White Primer, Draw Grey Veins, and Then Apply 25X Thick High-Gloss Epoxy topcoat. Easy Upgrade Your Countertop. Great Adhesion and High Gloss. Refreshing Your Kitchen Countertops..
Economic Benefits – The Marble Countertop Paint Kit is Aim to Slash Costs. Allows You to Bring Projects to Life without Stress! The Specialized Primer Hides Existing Discoloration, Burns, Stains, and Minor Scratches. The Mineral Colors Create the Characteristics of Marbled Quartz. Easy Remake Your Kitchen into The Space You’ve Always Dreamed of..

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
boat primer is chromate-free and lead-free.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
do not apply Topside Primer thicker than recommended or it may not cure properly.

Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray.
Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR_0075).
Excellent adhesion and corrosion resistance.
Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes.
Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075).

Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray.
Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR_0075).
Excellent adhesion and corrosion resistance.
Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes.
Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075).

...ywood, Concrete, Bar tops. We offer a high volume quantity of epoxy at a very low price in every kit sold. Rollers, buckets, mixers etc. can be purchased separately online or in box stores. Our epoxies are packaged and sold 3 ways..
Our 2 part epoxies should be used as the primer and the finish coat all in one. No need to purchase additional special primers. Colored Epoxies manufactures Heavy duty industrial grade epoxies and curatives offering a life time against cracking, peeling, chipping and hot tire pick up. We our epoxy strength whether its rolled out at 3 mills or notched squeegeed out at 10 mills same strength and durability. Our epoxy does not need to be measured out by thickness for durability..

【Epoxy Based Coating】High tech topcoat fortified with epoxies to ensure superior adhesion and durability..
【Durable】The rust inhibitor is tough enough to withstand temperatures of 300 degrees and 1000 hours of corrosion-resistant salt spray testing and is very easy to work with, simply wipe it off..
non-flammable, environmentally friendly, water-based, and suited for use both indoors and outside..
【Protect Iron and Metal Surfaces】It can quickly and easily remove rust and restore the original primer color of metal objects. It revives and protects iron and metal surfaces on automobiles, car chassis, dumpsters, equipment, railings, chains, etc..
【Wide Applied】Ideal rust solution for home, auto, industrial, fleet, aviation, marine, RV, and agricultural applications. Apply anywhere you see rust to permanently stop rust and prevent rust from spreading any further..

...sold. Rollers, buckets, mixers etc. can be purchased separately online or in box stores. Our epoxies are packaged and sold 3 ways. 3 quart kits, 3 gallon kits or 15 gallon kits delivering more product at a great price. Developed to be used with decorative flake and metallic..
Our 2 part epoxies should be used as the primer and the finish coat all in one. No need to purchase additional special primers. Colored Epoxies manufactures Heavy duty industrial grade epoxies and curatives offering a life time against cracking, peeling, chipping and hot tire pick up. We our epoxy strength whether its rolled out at 3 mills or notched squeegeed out at 10 mills same strength and durability. Our epoxy does not need to be measured out by thickness for durability..
ZERO VOC & VOHAP Free. UV resistant. #1 Epoxy seller for metallic floors and countertops Very flexible 100% pure solids no solvents. Coverage per gallon for solid color epoxy 300SF gallon using an 18″ roller, Metallic epoxy 65-70SF per gallon using a Magic trowel, Clear epoxy over flake as top coat 125sf per gallon with flat squeeze applied then back rolled. Dries in 7-9 hours each application. Vehicle traffic ready in 24 hours. Contact manufacture for free helpful installation tips 866-608-762.