Reviews Measurement Instrument

Koolertron 15MHz Embeddable Dual-Channel Function Signal Generator Counter,High Precision DDS Arbitray Waveform Generator Frequency Meter 266MSa/s (15MHz)

...evel, Half-wave, Full-Wave, Pos-Ladder, Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, sine pulse, Lorentz Pulse, and 60 kinds user-defined waveform etc. each channel can be independently set the parameters..
With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function..
Storage feature: You can store 100 groups instrument state parameters set by the user, can be called up to Reproduce. The frequency output of Sine wave can be up to 15MHz. 266MSa/s sampling rate. It has 60 positions for saving user-defined waveform. Waveform Length of each one is 2048 and vertical resolution is 14 bits.
The rear case can be easily disassembled, and there is no interface around the generator for easy installation and embedding into the test bench. The Generator is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research..

This probe is good oscilloscope accessories, it is universal for oscilloscope..
Stable performance, providing several accessories designed to make probing and measurements a simple task.
Professional measurement and accurate measurement..
Widely used, it can satisfy most peoples.

This instrument can test 0.0001mΩ~3.3kΩ resistance, 0.00001V~400.000V DC voltage, maximum resistance 33000 display digits, and maximum voltage 800000 display digits. The AT527/527B combines high-precision, high-resolution and ultra-high-speed measurement with 0.5% resistance accuracy and 0.01% voltage accuracy up to 70 times per second..
The instrument is used for professional sorting function, standard Handler (PLC) interface, separate output resistance HIGH / IN / LOW signal and voltage HIGH / IN / LOW signal, can fully cope with high-speed automatic sorting system to complete the automatic pipeline test, At the same time, the enhanced IO signal can directly drive the power relay and signal relay..
The instrument has built-in RS-232C interface and USB-232 interface. The instrument is equipped with universal data acquisition software, comes with database function and Excel..
The export function can be effectively applied to remote control and data acquisition and analysis..

This probe is good oscilloscope accessories, it is universal for oscilloscope..
Stable performance, providing several accessories designed to make probing and measurements a simple task.
Professional measurement and accurate measurement..
Widely used, it can satisfy most peoples.

Quick, accurate measurement of high and low pressure with two temperature compensated pressure sensors.
automatic measurements of the evaporation and condensation temperature.
83 refrigerants stored in the instrument: just one instrument covers all the most important refrigerants and, depending on the refrigerant, there is no need for different manifolds.
Equipped with a large 2 line backlit display, 2 way valve block and a suspension hook, the HVAC/R instrument enables a convenient application.
Including 3 hoses (blue, red, yellow), each 35.4 Inch long, suitable for all common refrigerants.The rugged housing of the digital manifold includes a frame around the display, which protects the digital manifold from impact to provides a lasting performance.Complete kit: one Digital Manifold Gauge, three hoses, two pipe clamp temperature probes. and a hard shell case.

Micrometer holder base is made of cast iron. The clamp is equipped with rubber pad to avoid damaging the instrument and protect instrument in the process of clamping..
Rubber lines jaws are 1.5" wide, will open to 0.75" (18mm)..
Micrometer Holder Stand fit for most inside and outside micrometers..
Micrometer Holder Stand Jaws can rotate 50 degrees forward and 30 degrees back..
Micrometer Holder Stand is mainly used for clamping 0-4" micrometer to provide high measurement stability..

The measurement of refractive index is simple and quick and provides the user an accepted method for sugar content analysis. Samples are measured after a simple calibration with steam distilled water. Within seconds the instrument measures the refractive index of the brix. This digital refractometer eliminates the uncertainty associated with mechanical refractometer and is easily portable for measurements in the field.
It is easy to use with simple three button operation and fast with a response time under 3 seconds. Easy to clean, stainless steel sample well with unit rated to IP65 as “dust tight” and protected against water jets. Ideal for winemakers, brewers, fruit and vegetable growers, maple syrup producers, and food producers..
This handheld refractometer is small, light and simple to use as optical refractometer, but with the precision of a digital readout. They read samples as small as 0.3 ml. Sample temperature is initially displayed on the TFT screen followed by the measurement results. They have easy-to-read LCD that eliminates the possibility of interpretation errors..
SM20 digital brix refractometer is commonly used in the food and beverage, agriculture and wine industries. Fruit farmers will use a refractometer to check the sugar conte....

This instrument is high precision sound level meter, accuracy up to ±1.5dB,resolution: 0.1dB.Temperature measurement function and Temperature unit selection(℃/℉)..
Red back light alarm and sound alarm function. This digital sound level meter with stable and reliable performance.Wide measurement range from 30dB to 130dBA.There will be a alarm warning when the measurement data exceeds the standard..
Data hold function, maximum and minimum value measurement. LCD display with backlight, convenient to use at night..
Low battery indication, automatic & manual power off function. Compact and light, convenient to hold and carry..
Equipped with sponge ball for sensor protection. Applications includes: Environmental measurement, law enforcement, work place design, sound level analysis of machinery and engines..

High-end precise probe to ensure the accuracy of measurement.
USB powered or AA batteries (not included), suitable for more scenarios.
High-quality electronic components to ensure the stability of the instrument measurement.