Reviews Mcp65pwm

EK-CoolStream Classic PE 360 Combo Pack with Free Tape Measure Tool

Combo kit comes with: 1 Radiator, 3 RGB fans, 1 fan splitter, 1 radiator gasket AND a FREE Tape Measure Tool!!.
EK-Vardar RGB fans is its simplicity as it uses standard 4-pin 12V RGB connectivity.
Dimensions: 393 x 120 x 45mm (L x W x H).
EK-Cable Y-Splitter 3-Fan PWM is a simple adapter used to hook two DC or PWM fans to one motherboard 4-pin PWM or 3-pin DC FAN connector..
Connect three (PWM) fans from one (PWM) fan header.

Tuned 3 Heat Pipe Extrusion Heatsink, Performs Up To 65W TDP.
4-Pin, 80mm PWM Fan, 1000 - 3000 RPM, 31.5 dBA.
Infinite RAM Clearance, Copper Base, and Nickel Plating for Ultimate Performance with Pre-Applied FUZEIce.
Socket Compatibility: Intel LGA 1200, 115X, 1366, 775, AM3(+), AM2(+), FM2(+).

Bass Boost: 0-12dB Subsonic Filter: 35Hz LPF Filter: 75-150Hz Phase Switch: 0 or 180 degrees.
PWM MOSFET Power Supply/Thermal Protection Circuit Adjustable Input Sensitivity Remote Subwoofer Control Included.
RCA and High-Level Inputs Delayed Soft Remote Turn On Slim 10” 2Ω subwoofer Remote Bass Knob Included.
Dimensions: 13.6” X 9.65” X 2.8”(L X W X H) 345 X 245 X 72 mm (L X W X H).

【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
(current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.

Note: This part is a refurbished part,If you have to replace the solenoids or valve body, or reprogram the system, always perform the adaptive relearn. If you don’t, you could run into harsh or erratic shifting..
Fitment:Compatible with Fits all GM Products with the 4L60E Model Automatic Transmission 2003-On.
Package List:This kit includes everything pictured: One (1) A Shift Solenoid One (1) B Shift Solenoid One (1) 3-2 Downshift Solenoid One (1) EPC (Pressure Control) Solenoid One (1) TCC/PWM Solenoid.

Award-winning NH-L9x65 cooler: more than 100 awards and recommendations from international hardware websites and magazines.
Dedicated special edition for the AMD AM4 socket.
Quiet, premium-grade NF-A9x14 92mm fan with PWM for automatic speed control.
Includes Low-Noise Adaptor and renowned NT-H1 thermal compound.

???? NSF 42 Certified Performance: Our superior water filter is certified by NSF International to NSF 42 for chlorine, taste and odor reduction. You’ll enjoy freshly filtered ice and water every day..
???? Lead-Free Material: Our superior water filter is certified to NSF 372 for lead free compliance, giving you the basic protection against insecure material..
???? Value for Money: Highly-efficient filtration for cents per gallon. You’ ll enjoy 300 gallons or 6 months of crisp tasting water at a fraction of the price..
???? Dependable Service: We offer unconditional 30-day money back guarantee. Any issue, please feel free to let us know. AQUA CREST cares you and your loved ones!.
???? Compatible Model: GE GSWF, GSWF3PK, GSWFDS, 100749-C, 100749C, 100810/A, 100810A, 215C1152P002, 238C2334P001, 35917-MN-1, AP3418061, Kenmore 46-9914, 469914, 9914, AP3418061, WR17X11608, EFF-6023A, Tier1 RWF1061, ICEPURE RWF3000A, K&J KJ-GSWF, Pureza PF9, WaterSentinel WSG-2, Odoga WFEK00011, Denali Pure WF-GSWF filter cartridge. Fit GE refrigerator models: GTS18KHP GTS22KHP, GTS18SHP GTH22SHP, PTS22LHP, PTS22SHP, PTS25LHP, PTS25SHP, PDS20MCP, PDS20SCP, PDS22MCP, PDS22SCP..

【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....

The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..