Reviews Mazda Roof Rack Accessories

Wind Fairing for Rack / 1475mm(W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1400mm (55.1") L x 2.5mm (0.1") W x 173mm (6.8") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

Wind Fairing for Rack / 1165mm/1255mm(W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

Wind Fairing for Rack/ 1345mm/1425mm (W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1267mm (49.9") L x 2.5mm (0.1") W x 176mm (6.9") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

Wind Fairing for Low Profile Rack / 1165mm/1255mm(W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1087mm(42.8") L x 2mm(0.1") W x 127mm(5") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND FITTING: A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

Swagman ROAMER RV Approved Cross Bars Roof Bike Rack

  • VERSATILE: The ROAMER 84" Cross Bars will fit most bike and water sports accessories. They can also be used to mount solar panels on a camper. The square steel crossbars accept most clamp-on carriers and accessories. Use them as a car top carrier to carry kayaks, or on an RV camper to perfectly haul your bikes..
  • EASY TO ASSEMBLE: Directions provided help guide through an easy installation. The roof rack crossbars come with provided bolt-down hardware and rubber pad mounts and are flawless for a generic installation on a flat surface. The cross bars can also be cut to fit your specific application..
  • STURDY: The crossbars are made from steel with a black powder coat finish that resists rust, corrosion and fading making them solid, strong, and stable. Build a universal roof rack that holds up well to hauling kayaks and bikes at the same time!.
  • SAVE MONEY: Inexpensively haul bikes, kayaks and other cargo up to a maximum of 75lbs. Use it as your car roof rack to efficiently transport up to 4 mountain bikes, or 2 kayaks..
  • RV RATED: Rack mount works perfectly on different sized trail....
Check Stock

Richeer Roof Rack Cross Bars Fit for 2017-2019 Compass (New Body) with Side Rails,Aluminum Cross Bar for Cargo Racks Rooftop Luggage Bicycle Roof Bag

  • 【FITMENT】Roof Rack Cross Bars Fit for 2017-2019 Compass (New Body). You’ll start by seeing which roof racks fit your vehicle.
  • 【ADVANTAGES】Roof rack cross bars made from 6063-T5 aluminum.Compared with all steel roof rack, our roof rack crossbars can bear more pressure, but the weight is lighter.
  • 【STRONG CAPACITY LOAD】It perfect for carrying roof boxes, bike racks, kayak saddles, ski carriers, surfboards and more.The maximum load capaticy is up to 100 LBS (45 KG).
  • 【EASY TO INSTALL AND DISMANTLE】No drilling required during installation. Installation instructions and Mounting Accessories are included in the package.
  • 【PRODUCT WARRANTY】This product is covered by the Richeer 2 year warranty to be free of defects in material and workmanship for two years from date purchased. If you have any questions or you are not satisfied with the product, welcome to contact us.
Check Stock

Thule AeroBlade Edge Flush Mount Rack (1-Bar), Large , Silver

  • Smoothly arched bars that fit close to the roof.
  • WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy.
  • TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar.
  • BoxBeam internal structure creates an exceptionally strong load bar.
  • Pre-assembled bar and foot system installs quickly.
  • Upper T-track allows fast installation/removal of accessories.
  • Secures to roof with Thule One Key locks (sold separately).
  • Cars with sun roof: Due to the racks' low fit on the car, it may not be possible to open the sun roof when the racks are installed. Please check clearance before opening your sun roof..
  • A kit-based roof rack system. Check the Thule Buyer's Guide to find out which roof rack fits your car.
Check Stock

Mazda 2010-2013 3 Overhead Console Dome Light Sun Roof Switch OEM BCN869970B75

  • Gray Overhead Console Dome Light Lamp With Sun Roof Switch Buttons.
  • 100% Genuine - Manufactured By Mazda For Mazdas.
Check Stock

AUXMART Roof Rack Cross Bars for Toyota Highlander 2008 2009 2010 2012 2013 Rooftop Luggage Rail Rack,Aluminum Cargo Carrier Bars

  • Fitment: Fit for 2008 2009 2010 2011 2012 2013 Toyota highlander,roof rack cross bars can perfectly matching the vehicle. Please make sure your....
  • Mechanical design: The roof rack conforms to the mechanical design and has an arc-shaped structure, which makes the roof rack have stronger bearing....
  • Powerful load: made of marine-grade aluminum alloy, cross bars can support up to 132 pounds (60KG), and can support luggage, ladders or cargo. And the....
  • Wide range of uses: Cross bars provide an ideal foundation for the installation of bicycle racks, cargo boxes and other roof accessories. Can be used....
  • Product installation: The package is equipped with all parts, please check after installation to avoid accidents. Installation is not difficult, roof....
Check Stock