Reviews Masonry Hammer Bits

COMOWARE Hammer Drills for Concrete, 1/2 In. Corded Drill, Hammer Drill, Variable Speed 0-3000RPM, Max 48000BPM, Hammer & Drill 2-in-1 Concrete Drill, 6.5 Amp Power Hammer Drills with 10 Masonry Bits

  • ..., and brick. The 6.5 amp power hammer drill is designed with 5ft extension power cable which helps for wider operating space..
  • 2-IN-1 MULTI-FUNCTION - Dual-mode selector easily converts the hammer drill from rotation-only to hammer drilling. Hammer function provides greater impact up to 48,000 bpm, allowing the masonry drill bits deliver aggressive drilling performance on brick wall and concrete. Please note that this power hammer drill is not suitable for reinforced concrete walls. Drill mode is suitable for titanium bits or cobalt drill bits drilling on wood, plastic and ceramic tile..
  • PRECISE SPEED ADJUSTMENT & SAFE OPERATION - Variable-speed trigger with rotary dial allows you to control the drilling speed at 0 - 3000 RPM according to your needs. Use the rotary dial to set the speed, then press the trigger to start the drill at the selected speed. It helps the corded hammer drill generate accurate bit starting when removing fasteners or bound bits..
  • 1/2 IN. KEYED METAL CHUCK - This concrete drill is equipped with sturdy and durable metal chuck. The 1/2 in. three-jaw keyed chuck provides more secure bit grip than ordinary plastic keyless chuck. It helps the impact drill deliver stable drilling performance in rugged applications..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...rick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...rick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

AOBEN 1-1/4 Inch SDS-Plus Rotary Hammer Drill with Vibration Control and Safety Clutch,13 Amp Heavy Duty Demolition Hammer for Concrete-Including 3 Drill Bits,Flat Chisels Point Chisels.

  • 【POWERFUL MOTOR】 AOBEN electric Rotary Hammer Drill is equipped with 13 Amp (1500W) motor that delivers powerful impact energy to complete heavy duty projects on concrete, Masonry and metal..
  • 【EASY TO OPERAT】 Three function modes can be easily switched - hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only) . There are double switch buttons to change the functions which can last longer compare with single switch button..
  • 【ERGONOMIC DESIGN】 AOBEN Roto hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life..
  • 【TOOL KITS】 AOBEN hammer drill set include 3 pcs drill bits(size of 8mm,10mm and 12mm), 1 pc flat chisel, 1 pc point chisel, a dirt proof boot, motor lubricant, 2 pcs of spare carbon brush Portable Carrying Case provides the perfect storage..
  • 【MULTIFUNCTION】 AOBEN Professional rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/4 inch drilling diameter for concrete and for metal is 1/2 inch. AOBEN provide 24 months warranty service..
Check Stock

10-Piece Masonry Drill Bits Kit for Concrete, Stone, Carbide Drill Bit Set for Glass, Brick, Tile, Plastic, Ceramic and Wood Size 5/32 to 1/2 inch

  • Add Tool Versatility - Our Concrete Drill Bits Kit includes on 5/32 in. on 3/16 in, four 1/4 in. two 5/16 in. one 3/8 in. one 1/2 in bits.
  • 1/4 in. Hex Shank - All 10 drill bits are equipped with the most common 1/4 in. hex shank providing ideal solution for drilling with both impacts and hammer drills/drivers.
  • Fast & Durable - 10-Piece Large Carbide Hammer Drill Bit Kit uses sharpened ground carbide tip to deliver faster drilling into masonry materials and longer life in concrete.
  • Wide Capacity - ideal for drilling concrete, walls, bricks, ceramic, wood, glass, tiles, stainless steel and more.
  • while drilling harder materials, Water or coolant is highly recommended..
  • Efficient- These bits deliver faster starts and less walking in concrete, brick and block.
  • Wide Flute Design providing fast dust remove ability and reducing heat.
Check Stock

Masonry Drill Bit Set 6 Pcs, Concrete Drill Bit for Glass, Brick, Cement, Concrete, Plastic, Wood, Tile, Industrial Strength Tungsten Carbide Tip, Hexagon Shank, Cross Triangle, 1/4-1/2 inch

  • 【High Quality Drill Bit Set】Made of premium metal alloy, rust-proof and corrosion-resistant, and the strength carbide tips to provide durable and wear-resistant masonry drill bits for concrete . High-hardness carbide blade-excellent abrasion resistance, durability, rust resistance. Able to easily penetrate various materials at once. Efficiency saves time and effort..
  • 【Efficient Design】Four-blade design, small incision resistance and small incision resistance, precise and effortless punching. Additional anti-skid triangle handles to design, firm operation. It is suitable for most general drill, electric drill, hand drill and bench drill. Rock carbide tip maximizes carbide surface contact for longer bit life..
  • 【Satisy All You Demand】Package includes 6 Pcs drill bit set : 1 x 4 mm (5/32"), 1 x 5 mm (3/16"), 1 x 6 mm (1/4"), 1 x 8 mm (5/16"), 1 x 10 mm (3/8"), 1 x 12 mm (1/2"). Fit the most electric or cordless hammer drills. Masonry drill bits set provide smooth and accurate drilling in ceramic tiles, marble, thin iron plates, mirrors, and glass. Remember to add water or coolant when drilling..
  • 【Easy to carry and store】 The masonry drill set is made of exquisite non-rusty plastic storage packaging, beautiful and exquisite, convenient for st....
Check Stock

VonHaus Lithium-ion 4.0Ah Spare Replacement Battery Compatible With All VonHaus 20V Cordless D Series Tools

  • HIGH PERFORMANCE – 10 amp motor delivers powerful impact energy to complete heavy duty projects on masonry, solid steel and more.
  • THREE FUNCTION MODES – choose from hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only).
  • CAPACITY –1-3/16” for concrete and 1/2” for steel and 1-9/16” for wood, no load rotation speed 0 - 850 RPM.
  • 360 DEGREE SWIVEL HANDLE – auxiliary handle with textured grip provides maximum control and comfort.
  • SET INCLUDES: Flat and point chisels, dust cover, SDS drill grease, SDS drill bits, SDS chuck & regular chuck for drill bits, depth gauge and storage....
Check Stock

10 Pcs Masonry Drill Bit Set with Strength Carbide Tips Glass Drilling Bits for Ceramic Tile Wood Porcelain Mirror Plastic Marble Wall, 1/8, 3/16, 1/4, 5/16, 3/8, 1/2 Inch.

  • 10 PCS DRILL BITS: measured 1x1/8”, 1x5/32”, 1x3/16”,4x1/4”,1x5/16”,1x3/8”,1x1/2”, the long drilling bits with hex shank can be firmly and stably installed on the electric drill, they’re suitable for drilling holes in ceramic tiles and mirrors..
  • SUPERIOR QUALITY: made of premium metal alloy and coated with zinc, glass drill set is rust-proof and corrosion-resistant, and the strength carbide tip of masonry drill bits for concrete is wear-resistant and durable..
  • SPECIAL CARBIDE TIP: flat designed tip of masonry drill bit is sharp and performs well in penetrating objects, and the holes drilled are round and smooth without broken edges or tremor phenomenon..
  • MULTIPLE FUNCTION: drill bit set with hex shank is widely applicable to ceramic tile, porcelain pot, marble, glass, wood and plastic, and can be used for installing mirror, towel rack and toilet paper roll in bathroom..
  • PROFESSIONAL CUSTOMER SERVICE: please do not drill hole in the hard ceramic tile.
  • please do not use our masonry drill bit set with hammer drill, if you have any questions about this hex shank glass drill kit, please feel free to contact us..
Check Stock

Diablo 3/8\ x 4\ x 6\ SPEEDemon Red Granite Carbide Tipped Hammer Drill Bit

  • Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits.
  • Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability.
  • More holes per charge in cordless impact and drill drivers.
  • Maximum performance in hammer or rotary drilling applications.
Check Stock