Reviews Manual Jack Plate

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

...are lumber into a temporary support or non-primary support (not intended for permanent installation).
[Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height.
4-inch height adjustment thread for shoring tension.
14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
[Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
[Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
nails/wood screws recommended, not required or included).
[Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
Base plate includes (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes spaced 4.5 and 2.25 inches (11.4, 5.7 cm) apart (center to center) for securing to floor (screws not in....

The 4-ton portable heat presser detects and delivers temp from the dual heat plate..
Hydraulic bottle jack and PID temp controller box can be replaced at home..
The manual pressing machine is best suited for personal home use w/o the pressure gauge..
3x5" heating working surface is sized to fit 2x4" or 2x4.5" screen bags, capable of 12 grams..
1.3" distance between upper and bottom hot plates..

The 4ton portable heat presser only detects temp from the bottom plate..
Hydraulic bottle jack and PID temp controller box can be replaced at home..
The manual pressing machine is best suited for personal home use w/o the pressure gauge..
3x5" heating working surface is sized to fit 2x4" or 2x4.5" screen bags, capable of 12 grams..
The bundle contains a variety pack of micron bags, 10pc collection tools and a cylinder stainless steel tool..

【WHAT ARE INSIDE THE BOX】1PC Electric A-Frame Jack , 3PC Flat&Star Washers, 1PC Manual Crank Handle, 1PC Level and 1SET Instruction Manual. Red wire(+) connect to 12-volt power source..
【DURABLE AND STURDY】Made of heavy duty steel, the electric A-frame trailer jack is rated capacity up to 3500LBS. Durable exterior black powder-coat finish on outer tube and zinc finish for inner tube with removable footplate will provide good surface protection and greatly reduce the rusty risks..
【TERRIFIC FEATURES】The purpose is for use with trailers with a A-frame coupler by wiring to 12-volt power source. The maximum travel is 18in. the standard tube diameter for a-frame trailer jacks is 2.25 inches, and the drop leg travel is 5-5/8in. Four holes on the footplate bracket are for height adjustment by securing with the locking pin. Bright LED lights are illuminated for night time..
【TIME-SAVING】Just push the UP switch to extend the jack until the footplate touches the ground. Retract the jack by pushing the DOWN Switch. The jack will slow down and stop as it approaches the fully retracted position. Release the swit....

4 port wall plate for keystone jacks creates an A/V cable patch location for a home theater media center or office conference room.
Accepts many types of keystone jacks including RJ45 Cat 6 Ethernet, HDMI, RG6 coax, banana plug, and more.
Single gang cover plate fits a standard-sized receptacle with the included mounting screws.
Add a new patch cable location using a low voltage mounting bracket.
Low profile cable wall plate with a cover that is almost flush with the wall.
Contemporary glossy design of this Ethernet wall jack outlet provides a professional looking installation.
Cost effective 10 pack of keystone jack wall plates provides enough outlet plates for a few renovation projects at home or in the office.
UL listed keystone jack (E486099) wall plate meets building specifications for low combustion wall outlets with flame-resistant, ABS plastic construction.

【2-Port Wall Plate】VCE 2-port wall plate for keystone jacks creates a A/V cable patch location for a home theater media center or office....
【Keystone Wall Plate】Allows for any type of standard keystone jacks to be mounted which will easily snap into the wall plate , These faceplates....
【Tool-Less Connection】Keystone jack insert wall plate can easily snap-in 2 port wall plate，ensure a secure and corrosion free connection,easily....
【UL Listed Wall Plate 】Standard size with mounting screws, re-usable keystone jack inserts can be easily disconnected and relocated when upgrading....
【Package Content】10 Pack white wall plates per bag with 20 mounting screws.

...e jack from falling even out of power and the jack will stop working automatically when reaching the height limit. Convenient built-in the electric wrench in the package, you can remove the screws while changing the tires, quick and convenient..
[Package Included] 1x car electric jack with controller, 1x instruction manual, 1x valve handle, 1x impact wrench, 1x power cord with clip, 1x cigarette lighter power cord, 2 sleeves, 1x reflective safety vest, 1 pair of gloves..

Completely Assembled Wall Plate - The wall plate and keystones have been assembled already, You can install it in the wall directly. No need to....
Easy to install - Installs just like any light switch plate, all you need is a standard screwdriver and plug the cable into the front and back.Then....
Convenient usage - This wall port jack is the perfect solution for connecting TV boxes, Router or other Coax/Ethernet Channel-enabled devices to your....
Ethernet keystone is compatible with Cat7 Cat6 Cat5 Cat5e network ethernet cable. Coax keystone is compatible with standard Coax RG6 Cable..
Package Contents:3 Port Wall Plate + 2 x Cat6 Keystone Jack + 1 x Coax Keystone Jack + 2 x Screws.(Not included Low-Voltage Mounting Bracket)..