Reviews Manifold Air Injection System

OTC Water Pump Holding Tool

  • ...tic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other damage..
  • A water tank pressure leak tester and vacuum purge fill tool kit is very helpful on troubleshooting, save money and time. If there is a small leak in cooling system, or if you add coolant without vacuum, can cause many problems or even a damaged engine, this kit is much cheaper than the maintenance cost or a new engine. And normally, the tools take about 10 minutes to test leak and 5-10 minutes to refill coolant. Simple operation and save time..
  • Thermometer uses stainless steel material, with scale range 0 - 200℃(32 - 400℉). Blue plastic case k....
Check Stock

SCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford

  • ...r damage in engine. This cooling system vacuum purge & refill kit is widely suitable for various domestic and foreign cars, SUVs, vans and trucks.
  • MATERIAL & USAGE: cooling system coolant refill tool has taken reliable metal construction to ensure durability and good air sealing. Equip with splendid aluminum & brass manifold body with rubber-covered pressure gauge (Range:-30~0 inHg/-76~0 cmHg). Brass T-connector can connect with vacuum pump for vacuumizing, and two standard air plugs (American & European style) are provided. 60" long coolant filling hose with quick plug can be inserted into the manifold body for refilling coolant.
  • Antifreeze filler kit includes a O.D. 32mm rubber adapter and 3 sizes adapter sleeves, with O.D. 45mm 40mm and 35 mm, fit for most types of vehicles. The adapter sleeves can be attached on the adapter on refill tool, and then replace the radiator cap to seal the cooling system, to help radiator purge and coolant refill. Please check your radiator opening size before bidding, there are only 32mm 35mm 40mm 45mm, 4 sizes adapters.
  • EASY OPERATION: Completely discharge the old coolant and trapped air first. Use the adapter or work with a suitable adapter sleeve to seat on the radiator opening, rotate the golden knob to seal. Connec....
Check Stock

PHITUODA 1\\/2 3 Ways 6 Ports Air Hose Inline Manifold Block Splitter, Pneumatic Air Compressor Manifold Fitting with Pipe Sealant Tape - Pack of 2

  • *Package Included: 2 x Air Hose Manifold Block, 2 x Pipe Sealant Tape. Position: 3 Ways. The number of Threaded Ports: 6 Ports. Threaded Port Dia: 1/2" BSPT..
  • *Premium Material: The manifold body is made of high corrosion-resistant anodized aluminum with a sky blue brushed nickel finish, which makes it not easy to deform, more durable, and 50% lighter than standard fittings..
  • *Practical Design: The operating pressure is 0 to 1MPa / 145 PSI. Guaranteed pressure resistance is 1.2MPa / 175 PSI. The max working pressure is 2MPa / 300 PSI. The working Temperature is 32 - 140 ℉ / 0 - 60 ℃..
  • *Ideal Application: Manifold Block takes one line of air from a pump, air cylinder, compressor, vacuum engine, or other such system and splits it into many of them. All ports are in the same size so that you can use it as a 1 in 5 out, 2 in 4 out, 3 in 3 out, and so on to meet your own requirement..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale!.
Check Stock

Air Lift 72000 Wireless Air Leveling Compressor

  • Easiest installation of air compressor for air springs ever with no lines or wires to the cab.
  • Wireless handheld unit for convenient operation in or outside vehicle.
  • Includes compressor and manifold and control box.
  • Inflate and deflate each air spring independently to different pressures perfect for users with uneven or top-heavy loads. With two user-defined....
  • Exclusive two way communication for advanced air system diagnostics.
Check Stock

Magic&shell Pneumatic Manifold Block Splitter 2PCS 1\\/2Inch 3 Way 6 Port Aluminum Air Hose Coupler Distribution Block Bar Line Splitter Manifolds

  • Including packaging: 2PCS air hoses. Location: 3 ways. Number of threaded ports: 6 ports. Thread port diameter: 1/2" BSPT..
  • The main body is made of highly corrosion resistant anodized aluminum and has a sky blue brushed nickel coating, making it less deformable, more durable, and 50% lighter than standard accessories..
  • The working pressure is 0 to 1MPa / 145 PSI. The guaranteed pressure resistance is 1.2MPa / 175PSI. The maximum working pressure is 2MPa / 300 PSI. The operating temperature is 32-140 degrees Fahrenheit / 0-60 degrees Celsius..
  • The manifold block takes a piece of air from a pump, cylinder, compressor, vacuum engine or other similar system and divides it into many parts. All ports are the same size, so you can use it as 1 in 5 out, 2 in 4 out, 3 in 3 out, and so on to meet your own requirements..
  • The cylinder manifold is the starting point of the cylinder system..
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock

VIVOHOME 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump and R134a AC Manifold Gauge Set Kit with 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump

  • PACKAGE INCLUDES - 1* 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump and R134a AC Manifold Gauge Set Kit for HVAC Air Conditioning Refrigeration Recharging ETL Listed.
  • 1* 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump with Oil Bottle ETL Listed.
  • HEAVY-DUTY VACUUM PUMP - Made of die-cast aluminum housing and a composite anti-slip rubber base, which is lightweight and durable.
  • Perfect for those who are looking to self diagnose or recharging AC systems.
  • It maintains air conditioning systems by efficient removing moisture before refilling the refrigerant.
  • CONVENIENT TO OPERATE - VIVOHOME air vacuum pump features a simple oil fill port for a clean pour, and the oil window provides you with vital information like oil level and oil quality.
  • The oil drain valve at the bottom ensures faster and more thorough emptying.
  • 1 bottle of 500ml vacuum oil is also included.
  • MANIFOLD GAUGE SET - Manifold gauge set is designed specially to measure pressure in refrigeration equipment.
  • Manifolds are equipped with large viewing glasses for easy viewing of refrigerant flow, and high-quality colorful pressure gauges ensure accurate readings.
  • WIDELY USED IN VARIOUS SYSTEMS - The intake filter can effectively prevent im....
Check Stock

HVAC Digital Manifold Gauge Set with Temperature Clips and Hoses for Heat Pumps Refrigeration Systems and Air Conditioning

  • Meet Your Needs: Refrigeration Digital Manifold HVAC System Gauge Set will help you detect and repair refrigeration equipment such as air....
  • MULTIFUNCTION: Compatible with many refrigeration systems. It can achieve dual pressure test and dual temperature test. With automatic multi-unit....
  • Accurate: Built-in 88 kinds of refrigerant pressure-evaporation temperature database. You can calculate the degree of subcooling and superheat. It is....
  • HIGH QUALITY: The instrument is made of high-strength engineering plastics and non-slip silicone. Long-life valve switch, 1/4 inch standard interface....
  • WORRY FREE: This versatile Refrigeration Digital Manifold HVAC System Gauge Set can help you accomplish a lot of work and solve a lot of problems. It....
Check Stock

6 Way 8 Port Air Manifold, G1\\/2 Supply Port, G1\\/4-Inch Output Port, Pneumatic Air Manifold Distribution Block, Industrial Aluminum Alloy Air Compressor Manifold

  • 【High Pressure Resistant & Better Sealing】 Acrux7 air distributor block has high pressure resistance and strong sealing. Air manifold for distributing pneumatic power to multiple locations from a single source..
  • 【Precision Air Distributor】Total Size: 20.3x3x3cm/8"x1.2"x1.2"(L*W*H).
  • Ports Diameter:11mm (0.4 in). Two G1/2" inlet ports and six G1/4" outlet ports.
  • 【Easy & Fast to Connect】The air compressor is equipped with quick connection couplers which is easy to connect and disconnect. Simply thread pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source..
  • 【Industrial Aluminum Alloy】Manifold block is made of aluminum for less weight than brass and resistance to corrosion. Efficient and stable performance, easy to install and sustainable..
  • 【Excellent Air Manifold】Air manifold is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock