Reviews Male Threaded Tee Female

Stanbroil Propane Brass 4 Port Tee kit with 5ft and 12ft Hoses Allows for Connection Between Auxiliary Propane Cylinder

  • Premium Quality: The kit is made of high-quality rubber and brass, more durable, gives you new flexibility..
  • Propane Brass Tee: 1/2” NPT Female Thread x Excess Flow Soft Nose POL x 1"-20 Male Throwaway Cylinder Thread x 1/4” female inverted flare..
  • 5' auxiliary tank hose: Soft-nose male POL x 1/4" inverted male flare..
  • 12' additional appliance hose: 1" male x 1" female swivel -20 throwaway cylinder thread..
  • Widely Used: Easy to install, Very safe and convenient. Great for camping, having an outdoor cook, grills, heater, A must have if you are a RVer..
Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • ...y Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # 12V3 - READ INCLUDED INSTRUCTIONS BEFORE INSTALLATI....
Check Stock

Irritrol 2400S Slip Globe Valve, 1

  • Threaded bonnet design - Allows easy servicing without removal from the system.
  • Rugged, double-beaded SANTOPRENE diaphragm - Ensures a leak-proof seal.
  • Internal and external bleed (flush mode) - Allows for manual operation.
  • Full stainless-steel metering system - Allows for consistent valve operation.
  • Available in multiple configurations-female NPT, slip, male x male and male x barb.
Check Stock

Irritrol 2400T Globe NPT Threaded Connection, 1

  • Threaded bonnet design - Allows easy servicing without removal from the system.
  • Rugged, double-beaded SANTOPRENE diaphragm - Ensures a leak-proof seal.
  • Internal and external bleed (flush mode) - Allows for manual operation.
  • Full stainless-steel metering system - Allows for consistent valve operation.
  • Available in multiple configurations-female NPT, slip, male x male and male x barb.
Check Stock

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

  • It can drain water or other harmful liquids thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
  • 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
  • Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
  • Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
  • Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
  • Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.
Check Stock

Irritrol 2600T Angle Valve with NPT Threaded Connection, 1"

  • Threaded bonnet design - Allows easy servicing without removal from the system.
  • Rugged, double-beaded SANTOPRENE diaphragm - Ensures a leak-proof seal.
  • Internal and external bleed (flush mode) - Allows for manual operation.
  • Full stainless-steel metering system - Allows for consistent valve operation.
  • Available in multiple configurations-female NPT, slip, male x male and male x barb.
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

Sink Faucet Adapter Kit Swivel Aerator Adapter to Connect Garden Hose - Multi-Thread Garden Hose Adapter for Male to Male and Female to Male, Polished Chrome

  • ...ead(connect to garden hose) or 55/64-Inchx27 male thread(connect to faucet aerator)..
  • ▶【Thread Connection】：This faucet aerator adapter converts standard female (55/64-inch x 27 thread) aerator to 3/4-inch male hose thread or 55/64-inch x27 male thread. Another male threaded adapter featured with male(15/16-Inch x 27 thread) to male(55/64-Inch x 27 thread) is free included..
  • ▶【Applicable Faucets】：ONLY compatible with sink faucets that have removable aerators. Works with male thread faucets(55/64-inch x 27) or female thread faucets(15/16-inch x 27) with removable aerators..
  • ▶【Quality Material】：Made of solid brass material, polished chrome plated finish, wear-resist and durable to use. Brass swivel ball connector, leak-proof and rotate freely. 360° Rotatable faucet adapter makes your garden hose swivel when connected. If garden hose not in use, connect the aerator to the adapter directly, then it becomes swivel faucet aerator..
  • ▶【Easy Installation】：Quick and easy to install with multi-thread design. Upgraded improved thread edge, no sharp edges, this s....
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type A included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...IZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE A FITTINGS]: The item include a type A (male adapter x female NPT threaded ) cam and groove hose fitting, you can directly screw onto pump male threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • [EASILY USE]: It can be easily connected, after Type A is connected to the pump, just slide type A male adapter into type C female coupler, press the brass cam levers down with n....
Check Stock