Reviews Machined Pin Header

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
NOTE: the item not include Arduino Uno module..

【1 to 3 Fan Splitter Cable】4 Pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
PWM splitter cable connects an additional fan to increase airflow in your computer case.
Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans..
【Easy to use】The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
【Steady and Durable】Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
【Broad Compatibility】3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
Add more cooling to your computer with this PWM fan splitter cable..
【Lifetime Warranty】Originated from confidence in product quality, we provide unconditional lifetime warranty ensures long-time satisfaction of your purchase and provide 24-hour service online..

Work for ASUS Motherboard. plz note that ONLY support usb3.1/usb3.0 device, it can't work at USB2.0(480Mbps).
USB 3.1 require a different front panel header than USB 3.0.
First motherboard with this is the ASUS ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G etc.There are no official release of the specs for the USB 3.1 header yet (as of this writing).
The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible..
USB 3.1 Front Panel Header to USB 3.0 Front Panel Header 20Pin Extension Cable 20cm.

Fan splitter cable is compatible with all brands of 4-pin PWM fans and 3-pin fans..
It is possible to run three chassis fans at the same time on a single PWM fan header and control the speed..
4 pin fan splitter is a black cable sleeve to make the inside of the case more concise..
ength 12.6 inches, 24 AWG pure copper conductor. Pack of two case fan splitter cables..
PC fan splitter has a 4-pin male fan connector connected to the motherboard, and the fan header splitter at the other end has three 4-pin female connectors connected to the PWM case fans..

PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
Note: This is not original Arduino product.it only a substitute accessories from ARCELI.

✔ Motherboard USB header splitter 1 to 4 ports Hub, wire belt shielding.
✔9 Pin USB Header for PC motherboard Can Prevent short circuit outlet design. motherboard USB splitter can prevent accidental removal of circuit....
✔ USB Splitter Convert motherboard USB 2.0 Female to 4 Females. High-quality electronic components.
✔ 30cm 9 pin USB Header Male 1 to 4 and hub connecting.
✔ Self-Stick 9 pin Motherboard USB Splitter for easy installation, automotive adhesive tape is attached on the back, can be directly fixed on the....

Installation Note *** USB power will always be on even when the system is shut down. Please unplug the PC power cable completely for 20 seconds before installation to avoid possible voltage spikes which may damage the chipset on the adapter. This adapter is designed to fit all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket..
…Forceful removal of the adapter may cause the header socket to be damaged, LINKUP is not responsible for such damage. Connector 1 (Motherboard) - USB 3.0 Internal IDC 20 Pin MB Male Housing Header. Connector 2 (Front Panel) - USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 motherboard IDC connector.
Active chipset enables full USB-C features, preserves the functions of Channel Configuration pins (CC1&CC2).
including attach/removal detection, plug orientation detection, and current advertisement. Also the communications required by the Power Delivery and Alternate Mode..
Recommended to be used with LINKUP - USB-C Type Panel Cable Mount Motherboard Header Extension Adapter (B07THC8ZVF). May not fit ITX motherboard in ....

Communication modes: standard IIC communication protocol.
Use the chip: MPU-6050, Power supply: 3V-5V.
DIY your own project and display the MPU-6050 Sensor Readings on oled via connecting it with R3 MCU Board or NodeMCU ESP32 Devkit.(oled display, R3 MCU board or ESP32 Devkit, breadboards not included in this listing).
What you will get: 5pcs MPU-6050 Accelerometer Gyro Sensor with 5pcs 8Pin Straight Pin Header and 5pcs 8P Bend Pin Header, 1pc 40P Female to Male Dupont Cable, 1pc 40P Male Pin Header..
How to email us? Please click “WISHIOT”(you can find Sold by WISHIOT under Buy Now button), in the new page, click “Ask a question” to email us.