Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2
- LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
- Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
- Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
- The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
- These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check StockOn-Stage MS8412 Lower Rocker-Lug Microphone Stand with 12” Low-Profile Base
- These top-of-the-line round base microphones stands are made from heavy-duty materials and are built to last.
- They feature a sleek embossed base with six rubber pads on the bottom, which absorb vibrations and protect floors.
- Rocker-Lug design tilts the entire shaft from the base 15 degrees off of the vertical--no boom arm needed.
- Oversized zinc die-cast clutch adjusts the height from 41 - 69".
- Entire upper shaft slides down inside the lower shaft for storage/transport.
- Solid steel machined lug with M20 threading provides an excellent combination of fast assembly and secure connection.
- This also extends thread wear far beyond fine-thread designs.
Check StockXinwoer Spinning Fishing Reels Plastic Spinning Reel Fishing 12BB for Fresh/Salt Water Sea Fishing Wheel for Love Fishing Gift(Black2000)
- One of the most professional and high-quality fishing gears..
- With exquisite workmanship,smooth surface..
- Folding rocker arm,metal grip handle,more comfortable..
- For different user habits,the rocker arm can be left or right handed..
- Plated line spool and label design,beautiful and light weight.
Check StockInfinity Instruments Retro Round Purple Clock
- Include: 1x Front Lower Forward Control Arm - Driver Side 1x Front Lower Forward Control Arm - Passenger Side 1x Front Lower Rearward Control Arm - Driver Side 1x Front Lower Rearward Control Arm - Passenger Side.
- Excellent Quality : Undergo Impact, Wear, And Fatigue Testing To Help Ensure Quality And Durability.
- Warranty: ONE YEAR WARRANTY AND BEST SERVICE!.
Check Stock3.6 Engines Rocker Arm & Valve Lifter Kit Replacement for Chrysler 300, Dodge Journey Charger, Wrangler, Ram 1500 & More Replaces# 5184296AH, 5184332AA
- 【HIGH QUALITY】Long life-span matters, that is why our rocker arm and valve lifter are made from high-quality materials to ensure it can provide you with long-term stability and excellent performance.
- 【Premium Quality】: The rocker arms and valve lifters have been manufactured to fit your vehicle, re-realize the continuous operation of cam to push rod and valve, restore the smooth running of the vehicle.
- 【FITMENT】3.2L Engines: 2014-2020 Jeep Cherokee. 3.6L Engines: 2011-2017 Chrysler 200| 2011-2016 Chrysler Town & Country| 2011-2018 Dodge Durango| 2011-2015 Dodge Durango| 2014-2018 Jeep Wrangler| 2014-2018 Ram Promaster 1500 & more.
- 【REPLACES#】5184296AH, 5184332AA, 5184296AD, 5184296AF, 5184296AE, 5184296AG, 5184296. The kit meets or exceeds the oem standard, perfectly matching the original car, and can be installed directly..
- 【24-MONTH WARRANTY】Exquisite craft, strict quality control and excellent after-sales service that is why our rocker arm and valve lifter kit worth your purchase.
Check StockBrian Tooley LS1 Rocker Arm Trunion & Bolt Kit 4.8 5.3 5.7 6.0 6.2 Trunnion BTR
- Brian Tooley LS Rocker Arm Upgrade Trunion Kit Includes Allen Head Bolts.
- These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
- The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
- These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
- Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check StockBrian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts
- Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
- These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
- The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
- These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
- Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check StockKeenso Fishing Reel Tackle,Plastic Spinning Plating Head 12BB for Fresh/Salt Water Sea Fishing Wheel YF Series Fishing Reel(2000-Black)
- 【GREAT PERFORMANCE】---The plastic spinning fishing reel has a folding design, metal handles, and a more comfortable handshake. The reverse stop switch controls the forward and reverse rotation of the fishing wheel. The rocker arms can be exchanged left and right to meet different user habits..
- 【PRACTICAL DESIGN】---This plastic spinning fishing reel has plated line spool and label design, beautiful and light weight ,folding rocker arm, metal grip handle, more comfortable. With exquisite workmanship, smooth surface. For different user habits, the rocker arm can be left or right handed..
- 【APPLICATION FIELD】---The plastic spinning fishing reel is made of heavy duty plastic, crafted with fine processing, sturdy, anti-rust, durable and smooth to use. This fishing reel is lightweight and portable, good for both sea and freshwater fishing, useful fishing tool for fishing lovers..
- 【SERVICE GUARANTEE】 --- We are here with a 100% product promise to give you the best customer support. Do not hesitate to contact us if you are not satisfied for any reason. We promise that all the problem will be solved within24 hours..
Check StockMotorcycle Swing Arm Spools Sliders, CNC Swing Arm Stand Screw, Swingarm Stand Paddock Compatible for Suzuki GSXR1000 GSXR1300 GSXR600 GSXR750 GSXR 125 GSXR 150 (Black)
- 【NOTE】Before ordering, please make sure that the bolt hole size is measured correctly. It can only fit 0.315 inch thread. And comes with four washers,if the rear rocker slider can not be installed flush in the spool bracket, or not firmly placed in the spool bracket, please add a washer..
- 【Application&Components】Universal, Compatible for most 0.315 inch street cars, sports vehicles, off-road vehicles, MOWOK 0.315 inch swing arm slider is made of aluminum high performance anodized alloy and specially designed and manufactured fasteners. For Suzuki GSXR1000 GSXR1300 GSXR600 GSXR750 GSXR 125 GSXR 150..
- 【Basic Function】To protect the rear rocker arm from inevitable tipping, place the motor on the bracket..
- 【Quality Assurance】MOWOK attaches importance to the shopping experience and satisfaction of each customer, so we provide lifelong technical support and 6 months of damage replacement service. No matter what problems, please contact us first, we will try our best to solve any problems for you..
- 【Excellent Performance】 The swing arm spool screw used with the swing arm can easily move the motorcycle up and down to avoid damaging the main body of the motorcycle when parking or repairing. Our swing arm spool is equipped with black gasket, wh....
Check Stock