Reviews Low viscosity

m.2 Thermal pad Kit，Pcie Thermal pad, M2 2280 NVMe Thermal pad…

  • 【Dimensions】- thermal pad fits for M.2 2280 SSD (22 x 80mm) Heatsinks..
  • 【 Item Size】 70 x 20 x 0.5mm,70 x 20 x 1mm,70 x 20 x 1.5mm,70 x 20 x 2mm..
  • 【Soft and Low Viscosity】- Soft enough and good ductility, compatible with uneven surface of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label..
  • 【Safe and easy to use】– Made from unique Nano Silicon Grease Material, with good thermal conductivity ability. Remove the protective films on both sides of the thermal pad and put it under the M.2 SSD Heatsink..
  • 【 Wide Compatibility】 Compatible : 850EVO / 860EVO / 960EVO / 970EVO / 950PRO / 960PRO / 970PRO / SM951 / SM961 / PM951 / PM961 / CM871a / PM871 / PM981 / XP941, no cutting required..
Check Stock

CORSAIR 7000D AIRFLOW Full-Tower ATX PC Case, White

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105B Epoxy Resin (126.6 fl oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

Red Line MT-85 75W85 GL-4 Manual Transmission Lubricant Pack of 2

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity MTL and heavier MT-90.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

  • For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
  • MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
  • Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
  • Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
  • Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..
Check Stock

CGOLDENWALL NDJ-5S Digital Rotational Viscosity Meter Viscometer Rotary visometer 110-240V 10~100,000mPa.s Accuracy:+-3.0% (Old or New Panel)

  • High Measuring Accuracy: Measurement range: 10mPa.S-100,000mPa.S(1mPa.S=1cp) Measurement error:±3%, with 4 rotors (No. 1, 2, 3, and 4) and 4 speeds (6, 12, 30, 60 rpm), which are composed of 16 combinations. You can determine viscosity as low as 1mPa.s with 0# rotor..
  • Microcomputer Control Technology: Adopts advanced mechanical design, manufacturing technology and microcomputer control technology.
  • LCD Digital Display: Has perfect data acquisition and the LCD monitor display selected blue backlit with high brightness so that it can show the results more clearly. Note: In order to provide a better user experience, we upgraded the product label. The product you received may be the old version or the new version.
  • Reliable and Easy to use: Has a measurement of high sensitivity, so the test results are reliable, and also, the operation is very easy..
  • Application: It can be used to measure the absolute viscosity of the Newtonian liquids and the apparent viscosity of the Non-Newtonian liquid. Also can be widely used in the tests the viscosity of the oil, paint, plastics, paints, detergents, drugs, jewelry and other objects..
Check Stock

Latuza Women's V-Neck Sleepwear Short Sleeve Pajama Set

  • 95% Viscose (made from bamboo), 5% Spandex.
  • Top features v-neck collar, short sleeve.
  • Wide smooth satin trimmed at the collar and the leg open.
  • Soft and light weight, loose fitting with ease.
  • Washing instruction: Do no bleach, Iron low heat, Do not dryclean, Do not tumble dry, Machine wash cold gentle.
Check Stock

Latuza Women's V-Neck Sleepwear Short Sleeve Pajama Set

  • 95% Viscose (made from bamboo), 5% Spandex.
  • Top features v-neck collar, short sleeve.
  • Wide smooth satin trimmed at the collar and the leg open.
  • Soft and light weight, loose fitting with ease.
  • Washing instruction: Do no bleach, Iron low heat, Do not dryclean, Do not tumble dry, Machine wash cold gentle.
Check Stock