Cooler Master MasterLiquid Lite 240 CPU Liquid Cooler - Dual Dissipation Pump and Dual 120 mm Air Balance Fans

  • MASTERLIQUID LITE SERIES - Calibrated to bring quiet, high-performance, CPU liquid coolers to the mainstream market with affordable all-in-one solutions for novices and experienced builders..
  • DUAL DISSIPATION PUMP - The copper plate heat exchanger anchors a unique dual-chamber pump designed to reduce vibration and noise ( 8 dBA) to near-silence (a white LED logo indicates when it's on). Includes both INTEL and AMD CPU bracket mounting sets..
  • DUAL FAN RADIATOR - MasterLiquid Lite 240 offers extra capacity for more intensive use with its double-length low-resistance radiator supported by two MasterFan Pro 120 Air Balance fans with hybrid blades, advanced IC Silent Drive (6-30 dBA) and vibration-dampening rubber mounting..
  • ROBUST TUBING - Extra-thick corrugated FEB tubing allows for sharp corners or tight bends without compromising the internal profile to ensure uninterrupted water flow..
  • COOLER MASTER QUALITY - With its simple twist-and-play guide and 2-year warranty, the Masterliquid Lite series offers unprecedented ease for installing liquid cooling in mainstream chassis..
Check Stock

ID-COOLING SE-207-TRX-BLACK CPU Cooler 7 Heatpipes Dual Tower CPU Air Cooler 35mm RAM Clearance(Up to 50mm), 2x120mm PWM Fans, TDP: 280W, TRX Socket Only

  • 【Better Heat Dissipation】The Dual Tower CPU cooler comes with 7 heat pipes and two120mm PWM fans to make sure excellent heat transfer from the CPU, an extra third fan can be added to gain the most efficient cooling performance..
  • 【PWM Fan】The dual 120mm PWM fan delivers Low-Noise for automatic speed control and ultra-quiet operation for extreme CPU cooling performance. Max. Air Flow: 76.16CFM.
  • 【RAM Compatibility】The cooler provides 35mm height clearance for memory when fans are installed at normal, And It is compatible with memory up to 50mm clearance when moving the fans up..
  • 【Perfect Contact with Processor】Total 2.7x1.8 inch base with 7 direct contact heat pipes can fully cover the Threadripper processors and dissipate the heat from the CPU quickly..
  • 【Compatibility】The dual tower CPU cooler can support AMD TRX socket only..
Check Stock

Aardwolf AP-465B-120ARGB CPU Air Cooler, Intel LGA 1200 CPU Cooling Fan, AMD Ryzen 7 RGB CPU Cooler RGB, 4 Direct Contact Heatpipes

  • 6mm x 4 pure copper continuous direct contact heat pipes in carry heat to the optimal locations on the cooling aluminum cooling fins.
  • The Addressable RGB lights in the pc case fan are illuminate the computer case components, and make the great visual effective for your computer equipment.
  • Silence-optimized fan Pure Wings PWM 120mm case fan rgb automatic speed control and color changeable.
  • The universal cpu cooler rgb fan mounting design to support and compatible with most of CPU motherboard.
  • Seven quality 120mm cpu case fan blades with high airflow compatibility reduce noise-generating turbulences during the cpu heatsink running.
  • Compatible with Intel LGA 1151, 1156, 1155, 1150, 1200, 2011, 2066, 1366, 775.
  • AMD Ryzen FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2, AM4.
  • The cpu air cooler mounting kit bag is including the screws, thermal paste, fan clips, cpu bracket for the AMD Intel rgb cpu cooler installation..
Check Stock

Zalman CPU Fan Cooling CNPS2X Red

  • Dimensions: 84mm(L) x 84mm(W) x 27mm(H) / Weight: 83g / Materials: Pure Copper, Aluminum / Bearing Type: Long Life Bearing / Power Connector: 4-Pin....
  • Top Down Airflow: The cooler pulls in cool air from directly above the CPU downward to quickly cool the CPU and motherboard. DTH-based (Direct Touch....
  • Ultra Quiet 80mm Fan: PWM fan allows for automatic speed control via the motherboard, built with long life bearings and noise-elimination technology....
  • Ultra Flat Profile: The super compact cooler is only 27mm tall and can be mounted in all computer cases, including mini ITX cases, perfect for small....
  • Compatibility: Intel LGA1156 / 1155 / 1150 / 775.
  • AMD FM1 / AM3+ / AM3 / AM2+ / AM2. Does not fit AM4..
Check Stock

Noctua NH-L9x65, Premium Low-Profile CPU Cooler (65mm, Brown)

  • Compact low-profile cooler with only 65mm total height – ideal for HTPCs, ITX and Small Form Factor builds.
  • Does not overhang the RAM or PCIe slots on most current motherboards.
  • Highly optimised NF-A9x14 slim 92mm fan with PWM support and Low-Noise Adaptor for automatic speed control and ultra-quiet operation.
  • Includes high-end NT-H1 thermal paste and SecuFirm2 mounting system for easy installation on Intel LGA1700 (LGA17xx family) LGA1200, LGA115x, LGA2011, LGA2066 and AMD AM4 & AM5.
  • Recommended for CPUs with low to moderate heat dissipation (see CPU compatibility list), e.g. Intel 13900, 13700, 13600 or AMD Ryzen 7950x3D, 7900x3D, 7800x3D, 7700 etc..
Check Stock

Thermalright TL-B12W 120mm Fan, S-FDB Bearing, PWM Control, 2150RPM, Static-Pressure Performance Fan

  • [cpu cooler Silent fan size] size: 120*120*25.6mm, Speed: 2150RPM±10%, noise≤ 28.1dBA.
  • port: 4pin pwm, current: 0.16A, Wind pressure: 2.87mm H2O (MAX), air flow: 69CFM (MAX), Higher air flow can improve cooling performance..
  • [Vibration-absorbing and low noise] The four corners of the fan are equipped with four vibrations absorbing pads, which pwm can reduce the vibration and friction caused by the rotation of the fan, perfectly reduce the noise and allow low-noise performance..
  • [High-quality bearing] The well-designed superior S-FDB bearing can keep the noise of the fan at the lowest level, and provide the maximum cooling performance when needed, as well as extend the service life of case fan..
  • [High-performance pc cooling fan] Automatically control the fan speed through 4pin PWM connection port on motherboard, the maximum speed can reach 2150RPM.
  • [9 piece blades design] The newly designed 9 blades and white frame provides high airflow with low noise, improve ventilation efficiency, and provide the required air pressure. The cpu fan is an ideal choice of case, and CPU cooler..
Check Stock

JONSBO N1 Mini-ITX NAS Chassis, ITX Computer Case, 5+1 Disk Bays NAS Mini Aluminum with Steel Plate Case, Built-in 14cm Fan, Only SFX Power Bite, Support H 70mm CPU Cooler

  • 5+1-Disk Bays NAS Mini Aluminum Chassis - * 5x3.5” HDD hard disk bays for high-capacity storage, making work and life coexist peacefully.
  • 1x 2.5”SSD disk bay ADAPTS to SSDS. High-speed hard disks provide fast response to frequent data use Application :Home office / network storage / enterprise storage and other fields Stand up & Lie down Available Easy to install by Pulling PCI Low Profile expansion slot : .
  • Built-in 14CM fan with large air volume and low noise Front Interface :Type-C (20PIN)/USB3.0*1/AUDIO*1+MIC*1(2 IN 1)Mini Chassis size : W170 x D354 x H217mm/W 6.69x D 13.94x H 8.54 in Net weight : 3.8KGS/8.38lb.
  • Motherboard : ITX Power supply :Only SFX < =150 mm CPU Cooler : < H 70 mm GPU : < = L 180 mm Single Low Profile.
Check Stock

Carhartt Men'sRelaxed Fit Duck Bib Overall Carhartt Brown,L32-W36

  • Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance..
  • Cools your CPU and GPU: install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures..
  • Improved CPU cooling: ultra-low thermal impedance lowers CPU temperatures vs common thermal paste..
  • Installation Made easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler..
  • Filling the gap: xtm50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer..
Check Stock

Arctic Silver 5 Thermal Compound - 3.5 grams+ MicroFiber 7 X 6 Cleaning Cloth Value Pack

  • Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance..
  • Cools your CPU and GPU: install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures..
  • Improved CPU cooling: ultra-low thermal impedance lowers CPU temperatures vs common thermal paste..
  • Installation Made easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler..
  • Filling the gap: xtm50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer..
Check Stock