MXL 770 Cardioid Condenser Microphone Bundle with Shock Isolation Mount Blucoil 10-FT Balanced XLR Cable and Pop Filter Windscreen
- PROVIDES WIDE DYNAMIC RANGE AND LOW NOISE - The MXL 770 Microphone employs premium FET pre-amp and transformerless balanced output to deliver....
- REDUCES UNWANTED RUMBLES - The low-frequency roll-off minimizes the undesirable ambient room noise such as HVAC and low rumbles..
- PROVIDES SUFFICIENT NOISE ISOLATION - The cardioid polar pattern of MXL 70 picks up sounds in front of the microphone while canceling the noise from....
- CAN BE USED FOR DIFFERENT MIKING APPLICATIONS - The all-around microphone works great for recording vocals. Its 137dB SPL makes it ideal for bass,....
- INCLUDES - MXL 770 Cardioid Condenser Microphone. Shock Isolation Mount. Rugged Carry Case. Blucoil 10-Foot Balanced XLR Cable - Premium Series 3-Pin....
Check Stock3M PELTOR Optime 98 Earmuffs H9A, Over-the-Head, Yellow
- Recommended for TWA noise exposures up to 98 dBA.
- Stainless steel headband distributes weight for low pressure fit.
- Earcup pivot points tilt for comfort that adjusts to individual wearers.
- Noise Reduction Rating (NRR) 25 decibels.
- Earcups with liquid and foam filled cushions offer comfort for long wear and optimum seal.
- For industrial/occupational use only. Not for consumer sale or use.
- Broad foam cushions provide low surface pressure.
Check Stock
KIMISS Side Air Vent Fan, 12V Side Air Vent Ventilation Exhaust Blade Fan Low Noise for Car RV Trailer SUV Caravan
- Wide Range Of Applications --------- Ideal fans for cars, trucks, camping tents, RVs, bedrooms, SUVs, ATVs, delivery vehicles, etc. Exhaust fan size: about 205 x 185 x 70mm / 8.07 x 7.28 x 2.76 inches..
- Low Noise --------- Equipped with a low-decibel silent fan, the exhaust is noiseless, and the exhaust volume: low noise 2.3M³/min. This fan specially made for motorhomes will provide you with a quiet and comfortable environment..
- Product Function --------- The side exhaust fan is equipped with a low-decibel mute fan, and there is no noise in the exhaust, providing you with a quiet and comfortable environment. Strong wind can provide air environment, and with a dust cover, which can effectively prevent dust from entering..
- With Dust Cover -------- Provide air environment. With dust cover, can effectively prevent dust from entering. Speed: 2000 low noise speed/min. The fan of the side exhaust fan is installed outdoors and is easy to remove, which provides you with great convenience..
- High-quality materials --------- The side exhaust fan is made of high-quality ABS, which has good durability and strength, abrasion resistance, is not easy to rust and aging, is durable, and has a long service life..
Check StockTell Mama Ray Rhodes Remix
- The OPA2134 series are ultra-low distortion, low-noise operational amplifiers fully specified for audio applications.
- Superior Sound Quality, Ultra Low Distortion: 0.00008%, Low Noise: 8 nV/√Hz.
- True FET-Input: IB = 5pA, High Speed: Slew Rate: 20 V/µs Bandwidth: 8 MHz.
- High Open-Loop Gain: 120 dB (600 Ω), Wide Supply Range: ±2.5 V to ±18 V.
- Example Applications: Professional Audio and Music, Line Drivers, Line Receivers, Multimedia Audio, Active Filters, Preamplifiers, Integrators,....
Check StockNoctua NF-P14s redux-900 Ultra Quiet Silent Fan 3-Pin 900 RPM 140mm Grey
- Ultra low noise fan, 140x140x25mm, 12V, 3-pin Molex, max. 900 RPM, max. 13.2 dB(A), >150,000 h MTTF.
- Renowned NF-P14s high-end 140x25mm 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines,....
- Highly optimised low-noise design provides outstanding quietness of operation, excellent static pressure and strong airflow (CFM), square frame for....
- Low-speed ultra-quiet 900rpm 3-pin version for demanding silent enthusiasts, virtually inaudible with optional NA-SRC10 Low-Noise Adaptors or at....
- Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA....
Check Stock
ACEIRMC 2pcs MAX9814 Electret Microphone Amplifier with Auto Gain Control for Arduino
- 1.The MAX9814 is a high-quality microphone amplifier with automatic gain control (AGC) and low-noise microphone bias. The device features a low-noise preamplifier, variable gain amplifier (VGA), output amplifier, microphone-bias-voltage generator and AGC control circuitry..
- 2.A trilevel digital input programs the output amplifier gain. An external resistive divider controls the AGC threshold and a single capacitor programs the attack/release times..
- 3.The low-noise preamplifier has a fixed 12dB gain, while the VGA gain automatically adjusts from 20dB to 0dB, depending on the output voltage and the AGC threshold. The output amplifier offers selectable gains of 8dB, 18dB, and 28dB. With no compression, the cascade of the amplifiers results in an overall gain of 40dB, 50dB, or 60dB..
- 4.The MAX9814 is available in the space-saving, 14-pin TDFN package. This device is specified over the -40°C to +85°C extended temperature range. MAX9814: Simplified Block Diagram MAX9814: Simplified Block Diagram Enlarge+.
- 5.A trilevel digital input programs the ratio of attack-to-release time. The hold time of the AGC is fixed at 30ms. The low-noise microphone-bias-voltage generator can bias most electret microphones..
Check StockKUPPET Retro Mini Refrigerator 2-Door Compact Refrigerator for Dorm, Garage, Camper, Basement or Office, 3.2 Cu.Ft (Black)
- ★ ADJUSTABLE TEMPERATURE CONTROL ★Rotate the thermostat knob to approximate the temperature range: 32°F – 50°F. With an easy-to-use thermostat, compressor cooling helps maintain optimum temperatures to keep items fresh..
- ★ LOW NOISE ★ Low noise mute, enjoy a low noise life, maintain a quiet working environment, and be free from the noise of refrigerator operation..
- ★ SLEEK DESIGN ★ KUPPET refrigerator has a retro design, novel and unique, size 19.1 (W) * 21.9 (D) * 33.5 (H) in, capacity 3.2 Cu.Ft, suitable for any need, such as family, dormitory room, office space, garage, workshop, etc..
- ★ CHROME HANDLE ★ The retro-style chrome handle design is unique and reminiscent of the charm of the 1950s..
- ★ LED LIGHTING ★ LED interior light illuminates for easy, nighttime selection of your favorite food or drink.Energy-Efficient..
Check Stock
Electric Baby Hair Clipper, Auto Sucking Cordless Rechargeable Fully Waterproof Kids Hair Trimmer with Guide Combs, Quiet Haircutting Set, Built‑in 500mAh Battery Haircut Kit for Kids Infants(EVA)
- ...ened rounded tips, ceramic blade and high quality brass movement motor to secure safety. With 0.5mm to the skin, the ceramic blade is special designed for 0-12 years old babies.ENSSU baby hair clipper will not harm or scratch infant's sensitive skin. which will enable hairs trimming comfortable and smooth..
- 【Lower Noise】Advanceded noise reduction technology and high quality brass movement motor to enabble this baby hair clipper to work in low vibration and very low working noise about 48dB, just like pillow talking.Baby will be relaxed and eased..
- 【Fully Washable】Unique sealing design, the whole body of this baby hair clipper is waterproof. It can be soaked in water.This feature will help you easily tidy up the hairs by using the provided brush and then clean it in water.It is easy to clean and maintenance this baby hair clipper..
- 【Easy Operation】Streamline body curve designed,this baby hairs clipper's size is smaller than other clippers to make this clipper is easier to handle and better trim hairs, especially hairs around the ears. The guide combs will help you trim your baby's hairs easier. You do not need to nervous and worry about making mistakes..
- 【Lower Noise】Advanceded noise reduction technology and high quality brass movement mot....
Check StockSalmue Cartridge Tattoo Machine, Professional Tattoo Motor Gun, Tattoo Machine Liner Shader Tattoo Makeup Machine Tool
- Cartridge Tattoo Machine Precision, continuous operation, low noise, durable, light weight, integrated molding. Compatible with all cartridge needles..
- Low noise: The tattoo machine is light in weight, low in noise and fast in heat spread, suitable for pads and shaders..
- Stable performance: low jitter and smooth operation. It runs fast and is easy to use. Can work long hours without tired hands, is the ideal choice for tattoo work..
- Suitable for: Can be used as a pad or shader. Good at sunshade and lining. Tattoos are neat and tidy, made from this machine, and are easy to color, making them ideal for tattoo artists looking for quality tattoo machines..
- Starting working voltage: 1.5V, the best matching voltage: 6-8V, rotating speed: 10500 rpm..
Check Stock 
