Reviews Long Shank Eye Bolts

VEVOR Hitch Mounted Ripper, 18' Shank Length Box Scraper Shank, 4 Hole Site Box Blade for Tractor, 2 Locating Pins Ripper Shank, 2 Plough Tips Box Blade Shank Teeth

  • 4 Adjustable Hole Sites: Hole Spacing: 2 in / 5 cm. The hitch-mounted ripper has multiple depth Settings, adjustable for different operating depths, adding two more holes than most similar products. In addition, the box scraper shank is equipped with a shear bolt to protect the hitch and leg..
  • Carbon Steel Material: The box blade for the tractor is made of high carbon steel with high strength and resistance to deformation. The spray paint coating on its surface insulates metal from direct contact with air and effectively prevents rust and corrosion..
  • Complete Accessories: We come with an additional replaceable plow tip and mounting pin. The ripper shank has full accessories: 18" length adjustable shank, two ripper teeth, two mounting hooks, shear bolts..
  • Effortless Installation: In just three steps, the box blade shank teeth can be installed by hand. Firstly, install the shear bolt.
  • Versatile Applications: Ripper shank for box blade is widely used, compatible with most ATV/UTV and 2-inch receivers, and recommended for CAT 0 and CAT 1 tractors..
Check Stock

TOPTOW RV Bumper Hitch Receiver 63801 for 4 inch to 4.5 inch Beams, 2 inch Receiver Opening, Fits for Bike Racks, Cargo Carriers Camper-on

  • Attention: This accessories is NOT intended for RV level Trailer towing Purpose, PLEASE BE CAREFUL to using.
  • [STANDARD FIT] This hitch receiver has 2" x 2" tube opening. Fits most of bike racks, cargo carriers with 2" shank. It has a 200 lbs tongue weight capacity. 5/8" hitch pin or hitch lock not included.
  • [EASY TO INSTALL] It has 4 full threaded bolts and nuts. It can be easily mounted on your RV bumpers. Fits most of 4" to 4-1/2" Continuous Steel Bumper Beams (Can be Mounted Upside Down). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper.
  • [DEPENDABLE STRENGTH] Made of heavy duty steel construction. Robotically weld provides more secure.
  • [CORROSION RESISTANCE] For long term use, this hitch adapter is protected by a durable black powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances.
Check Stock

Allstar Performance ALL56071 11-3/4\ Sway Bar Bolt

  • Swivel End Bolt Is 11-3/4" From Center Of Eye To End Of Threads And Have A 1/2" Square Drive End For Quick And Easy Adjustments.
  • Available In A Fixed Or Swivel End Design.
  • Sway Bar Bolt, Swivel, 11-3/4 in Long, 2 in Eye, Steel, Cadmium, Each.
Check Stock

Simple Combination Mini Quick Change Tool Post Kit Set For CNC Table/Hobby Lathe Aluminium Material

  • Fits 7x10, 7x12 and 7x14 mini lathes, ACCEPT - Turning Holder: 1/4-3/8" Shank.
  • Using the dial, each tool holder can be rotated multiple angle of 9 ° or 9 °, operations with extension units,can be processed various angles work piece..
  • Mounting hardware include 2x mounting bolts (M8 & M10) 2x Allen Key.
  • Holder include: Two turning tool holders, a boring tool holder, a cut-off blade holder..
Check Stock

HYXXYY Stainless Steel Eye Bolt, 4pack M8 Shoulder Eye Bolts 5/16\ X 4\with Nuts and Washer Thread Lifting Ring Eyebolt, Long

  • Ring Bolt Features: The heavy duty eye bolts 4” with strong support, the lock nuts providing better security and firm hold, the washers included can prevent loosening.
  • Dimension: This M8 Eye Bolt rod total length 135mm/5.3inches, thread outer diameter is 8mm/0.31inch, thread length 100mm/4inches, ring inner diameter 20mm/0.78inch.
  • High Quality Material: The stainless shoulder eye bolt is made of high grade 304 stainless steel, The surface of the thread is smooth, the force is even, it is not easy to damage, and it is durable, This stainless eye bolt is made of super large machine, which offers good corrosion resistance in any environment, have superior rust resistance and the excellent of oxidation resistance.
  • Perfect Kit: These M8 shoulder eye bolts are formed and welded for a heavy duty anchor point, Often used to attach wire rope or other rigging hardware to a surface or object, suitable for homes, offices, hotels and other places, play the role of attachments and suspension.
  • Package includes: 4 x shoulder eye bolts, 4 x nuts, 4 x washers, if you are not satisfied with the product, you can always send us an email to us, provide you with satisfactory service in the first time.
Check Stock

CURT 18112 50 x 30-1/2-Inch Black Aluminum Hitch Cargo Carrier with Ramp, 2-in Folding Shank

  • THREE-POSITION RAMP. This hitch cargo carrier features an innovative folding ramp. The ramp folds out for easy loading of a mobility scooter, push lawn mower, snow blower or other cargo. It can be folded in half vertically for easy transportation.
  • LIGHTWEIGHT ALUMINUM. This trailer hitch cargo carrier with ramp is constructed from aluminum to be strong, highly corrosion-resistant and easy to move and operate. It also features a durable carbide black powder coat finish for added weather protection.
  • 500 POUND CAPACITY. For dependable transportation of your mobility scooter or other large cargo, this scooter hitch carrier is tested and rated for 500lbs. It also features integrated eye-bolts for secure tiedown anchors.
  • ENHANCED SAFETY. The CURT aluminum cargo carrier with ramp comes with an anti-rattle hitch pin for ready installation and vibration resistance while traveling. It also features built-in reflectors for enhanced visibility on the road.
  • STANDARD FIT. This trailer hitch cargo carrier with ramp is perfect for installing on most class 3, class 4 and class 5 hitches, featuring a folding 2-inch x 2-inch shank.
Check Stock

McGard 27179 Chrome Bolt Style Cone Seat Wheel Locks (M12 x 1.5) - Set of 4

  • ...using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your lug bolts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug bolts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership..
Check Stock

Shoulder Eye Bolts, Heavy Duty Eyebolts 304 Stainless Steel Wall Concrete Anchors Screw Expansion Bolts with Nuts Eye Hooks Fastener for Ceiling Concrete Masonry

  • Dimension: This M10 Eye Bolt rod total length 85mm/3.35inches, thread outer diameter is 10mm/0.39inch, thread length 50mm/2inches, ring inner diameter 25mm/0.98inch.
  • Ring Bolt Features: The heavy duty eye bolts 4¡± with strong support, the lock nuts providing better security and firm hold, the washers included can prevent loosening.
  • Perfect Kit: These M8 shoulder eye bolts are formed and welded for a heavy duty anchor point, Often used to attach wire rope or other rigging hardware to a surface or object, suitable for homes, offices, hotels and other places, play the role of attachments and suspension.
  • High Quality Material: The stainless shoulder eye bolt is made of high grade 304 stainless steel, The surface of the thread is smooth, the force is even, it is not easy to damage, and it is durable, This stainless eye bolt is made of super large machine, which offers good corrosion resistance in any environment, have superior rust resistance and the excellent of oxidation resistance.
  • Package includes: 2 x shoulder eye bolts, 2 x nuts, 2 x washers, if you are not satisfied with the product, you can always send us an email to us, provide you with satisfactory service in the first time.
Check Stock

8Pcs License Plate Screws Bolts - Motorcycle Plate Frams Covers Black Fasteners, Anti Theft Screw Caps for Car, License Plate Hole Plug, Halloween Skull Car Decor Accessories

  • 【Order Reference】 The skull license plate screw measures 0.71X 1.02 inches, with a thread diameter of 0.236 inches. Available for all license plate frame 0.236 inch/6 mm bolts, please measure the hole diameter of your license plate before purchase to ensure fitment..
  • 【Easy Installation】 Skull plate bolts are easy to install and only take a few minutes to secure the bolt to the license plate holder. License plate fasteners can be well-tightened and fixed to prevent license plates from being stolen or dropped..
  • 【Red Eye Skull Design】 The fastener set is perfect for decorating your car on Halloween. The unique punk style makes your car look more stylish and cool..
  • 【Long Service Life】 The license plate screws are strengthened and durable, and the metal nuts can resist rust and corrosion..
  • 【You Will Get】 Package containing 8 skull bolts, nuts, and washers set for your daily application and replacement needs. Universal license plate bolts are suitable for Harley, most cars, motorcycles, RVs, and trucks, and can also be used as windshield bolts..
Check Stock