Reviews Lock Nut With Nylon

(Pack of 2) 3/8in Bolt On Grab Hook with Clevis Mount - Full Black

3/8 Grab Hook Bolt-On Mount with Complete Hardware for Installation.
Grab Hook is Grade 70 rated at 6,600 lb. WLL (Working Load Limit).
Grab Hook is Welded On a 1/4" Thick Steel Plate.
Entire Mount is Powder Coated for Weather Protection.
Every Mount Includes 1/2" x 1-1/2" Grade 8 Bolts with Washers and Nylon Lock Nut (See Picture).

Function: Gearbox Mainshaft Nut Tool is designed to accept a 1/2" drive wrench or a 30mm AF socket/spanner, This tool is used for tightening up the mainshaft nut on the end of the gearbox output shaft to a torque of 85lbf..
Operation: This is to ensure the best engagement between the teeth on the tool and the spindle lock nut.
it is common to find the spindle lock nut that has been tightened with a hammer and chisel..
Contains: 1 × Gearbox Mainshaft Nut Tool (Equivalent to OEM 600300). This nut Fit For Land Rover Series vehicles with the factory fitted gearbox.
Material: They are precision manufactured from toughened steel and zinc plated to ensure they last for years. EN24T Steel gives the tool high tensile strength, shock resistance, good ductility and resistance to wear..
Service: ZKTOOL is committed to providing the best professional tools and best service for auto repair. If you have any questions, please contact us. We provide 24-hour before and after sales servic.

5/16 Grab Hook Bolt-On Mount with Backer Plate and Complete Hardware for Installation.
Grab Hook is Grade 70 rated at 4700 lb. WLL (Working Load Limit).
Grab Hook is Welded On a 1/4" Thick Steel Plate.
Entire Mount is Zinc Chromate Plated for Weather Protection.
Every Mount Includes 1/2" x 1-1/2" Grade 8 Bolts with Washers and Nylon Lock Nut (See Picture).

HEAVY-DUTY: 5/8 inch anti-rattle pin fits 2.5 inch hitch receivers with up to Class IV tow ratings (12,000 lbs max).
requires hollow shank tube tow equipment.
SILENT TOWING: Eliminates distracting rattle & motion in hitch while absorbing shock loads.
metal sleeve equalizes 5/8in shoulder across both pin holes for increased sheer strength.
STATE-OF-THE-ART: Steel spring nut and enhanced corrosion resistant, self-lubricating finish with chrome, zinc, and stainless steel components.
EASY TO USE: 90 degree press-on lock swivels for convenient, no fumble access in tight hitch spaces.
ANTI-CORROSION: Heavy-duty lock with watertight nylon jacket and dust cover for easy grip and corrosion protection to interior and exterior.

Controller includes temperature alarm and Water Tight PT-100 RTD Sensor with 1/2" MPT Threads - includes 1/2" FPT Nylon lock nut and silicone washers All Metal (aluminum) housing.
Includes 12' 10 Gauge SJOOW Power Cord, 4 prong dryer plug, two 3 Prong twist-lock 240V outlets and two separately switched 120V Pump Outlets.
Controls up to two 5500 Watt 240V elements (one element at a time) and Compatible with GFCI breakers. But expandable to control two or more 5500 Watt elements at a time with our new expansion module - listed elsewhere on Amazon..
Intended for a 240V HERMS brewery where one heating elements heats and manages mash temperature and a second element does final boil. One switch flips between PID controlled mash and full PWM boil control. Circulation pump outlets 1 and 2 are controlled by separate switches. Water resistant all aluminum housing..