Reviews Lna Module Antenna
DISH MT2 OTA MODULE [Electronics]
- An MT2 Over-the-Air (OTA) Module to connect your over-the-air (OTA) antenna directly to your ViP222k or ViP722k DVR satellite receiver.
- View local, digital, over-the-air channels directly through your satellite receiver by integrating the OTA channels into your Program Guide..
- An OTA antenna must be installed to use the Module..
- A satellite signal and a DISH Network programming subscription is required to operate the OTA module..
Check StockNooelec SAWbird+ NOAA - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA Applications 137MHz Center Frequency
- SAWbird+ NOAA is a self-contained LNA module designed for capturing beautiful weather images available from NOAA satellites (~137MHz).
- The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
- SAWbird+ NOAA can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
- Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee (available on Amazon, product ID B079C4S2BT).
- Includes free aluminum enclosure, male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through....
Check StockVehicle GPS Active Antenna SMA Male Plug,Waterproof GPS Navigation Antenna with 3 Meters Cable for Dash DVD Head Unit Stereos,28dB Gain DC3-5V
- Strong signal: Waterproof GPS Navigation Antenna with SMA male connector,Help your GPS to get stronger signal anytime anywhere.
- Rapid positioning: 28 dB of gain, built in LNA, picks up your position rapidly.
- Easy to use: This SMA GPS antenna has a magnetic base which can fixed at any metal surface..
- Warranty: DYC supports 60 days unconditional refund, 365 days replacement service. If you need any asistance, please feel free to e-mail us..
Check StockOiyagai 3pcs 433MHz RF Wireless Transmitter and Receiver Module Kit for Arduino/Arm/McU/Raspberry pi (433MHz)
- 3 x Transmitter module (433MHz) & 3 x Receiver module(433Mhz).
- These modules are used for projects when you need to communicate wirelessly between 2 devices.
- It is possible to increase the range by adding a small length of cable which the device will use as an aerial..
- VCC voltage module operating voltage and good power filtering.
- Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source.
Check StockDedicated Aluminum Heatsink for Raspberry Pi Compute Module 4 (CM4), Notched for Antenna
- Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4:Dedicated aluminum heatsink, corrosion / oxidation resisting, better heat dissipation.
- For CM4 & based board:matching with the CM4 on size and mounting holes, fast heat dissipation.
- Notched for antenna section:no hindrance to the antenna.
- Using with base board: for Official Compute Module 4 IO Board or Waveshare Compute Module 4 PoE Board.
- Note: Only HEATSINK,not include base board.
Check StockBingfu Car Dash Cam GPS Antenna Vehicle Dash Camera GPS Antenna Waterproof Hidden Adhesive Mount 3.5mm Plug GPS Antenna for Car Dash Cam Dashboard Camera Safety Vedio DVR Recorder GPS Tracker Receiver
- Vehicle Waterproof Active GPS Navigation Antenna with 3.5mm Audio Connector for Car Truck SUV Windshield Mirror Dash Camera Cam Vedio Surveillance Monitoring DVR Recorder GPS Tracker Receiver.
- Package List: 1 x Antenna (As the Picture Shown).
Check Stock2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
- With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check StockNooElec SAWbird+ GOES - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA GOES/LRIT/HRIT/HRPT Applications 1688MHz Center Frequency
- SAWbird+ GOES is a self-contained LNA module designed for capturing beautiful weather images available from NOAA GOES satellites.
- The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
- The amplifier can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
- Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee XTR v2 (available on Amazon, item ID B06Y1GN5RP).
- Includes free male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through Nooelec!.
Check StockALMOCN 4 Set 433MHz RF Wireless Transmitter and Receiver Kit High Frequency Super Regenerative Transceiver Module for Arduino Raspberry pi
- Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor. The....
- Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that....
- Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high....
- Frequency used to receive, decode and oscillation resistor should match with the transmitter..
- Application:Usually used for remote control systems, such as Remote control rolling gates, smart car, smart home, etc..
Check Stock