Reviews Linear Motion Guide Actuators

MGN12 400mm Linear Rail Guide with Mini MGN12H Linear Block Carriage Miniature Linear Motion Guide Way

  • Slide is attached and can slide smoothly. Mini Petite, convenient to put in and out.
  • There are are 2 anti-fall strips on each side of the block, which reduce the situation that the carriage block is stuck during shipping, and makes it lower noise when the carriage block is running on the guide rail..
  • Application to CNC parts, 3d printer parts, semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robot arms, and other small linear motion machines, linear motion measurement equipment.
  • .If you need special length, feel free to ask us.
Check Stock

Mssoomm 15mm HGH15 CNC Square Linear Guide Rail Kit 2Pcs HGH15-25.2 inch / 640mm +4Pcs HGH15 - CA Square Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • HGH15 linear guide rail set includes 2Pcs HGH HGR15-640mm（25.2 inch）linear guide rail and 4Pcs HGH15CA square type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGW 15 linear rail kit.
  • The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGH-HA, HGW-CA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you can use s....
Check Stock

Usongshine MGN12H Linear Rail Bearing Sliding Block Match use with MGN12 Linear Guide for CNC xyz DIY Engraving Machine (350mm, H-Type)

  • Smaller and lighter solution of linear motion guide for multiple DIY machine projects, 3D printers, equipments and other small size linear devices..
  • Smooth movement, low friction, easily maintained and carried..
  • Same model with more sizes are provided..
  • Package includes 2 mini linear rails MGN12 and 2 slide units MGN12H..
Check Stock

Mssoomm 25mm HGW25 CNC Square Linear Guide Rail Kit 2Pcs HGW25-116.14 inch / 2950mm +4Pcs HGW25 - CA Flange Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • HGW25 linear guide rail set includes 2Pcs HGW HGR25-2950mm（116.14 inch）linear guide rail and 4Pcs HGW25CA flange type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGH 25 linear rail kit.
  • The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The flange square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGW-HA, HGH-HA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you....
Check Stock

UniTak3D MGN12 Linear Guide Rail 350mm with MGN12H Bearing Steel Carriage Block for Ender 3 CoryXY DIY 3D Printer and CNC Machines

  • 【Anti-rust Coating Surface】: Linear Guide Rail adpots blackening treatment on surface to prevent rusting in long-term use..
  • 【Upgrade 3D Printer】: The 350mm MGN12 Linear Rail will upgrade your 3D printer,which can improve print quality and carrying capacity greatly..
  • 【Premium Material】：The linear bearing is made of heavy-duty bearing steel,which is more durability, high stiffness stiffness,high accuracy,smooth running, low noise than others..
  • 【Application】This linear motion rail widely use in Ender 3 series/CR10 series 3D printers, large-scale transmission equipments including industrial robots, cleaning equipment and supporting devices, etc..
  • 【Drop Proof Rubber】：There are 2 black rubber stoppers on the ends of the linear sliding guideway in case the carriage falls off the rail..
Check Stock

CHUANGNENG 2Pcs Linear Rail SBR12-1200mm Linear Rail Guide CNC Parts, 59inch Fully Supported Linear Rail+2pcs SBR12UU BlockBearing Block Bearing for DIY CNC Routers Lathes Mills Automated Machines

  • Linear rail model: SBR12-1200 .Guide Length: 0.47.Diameter: 0.47.Suitable for for 0.47inches slotted bearings.
  • Aluminum support rail with pre-drilled holes for ease of mounting.Suits X, Y, Z axis.
  • The support rail unit provides maximum rigidity and stiffness to the shaft throughout the whole stroke, and ensure the performance of the unit.
  • The linear guide rail can be applied to DIY CNC routers lathes and mills, Easy to install, no need to maintenance..
  • It is widely used in linear motion system. Such as, punch, tool grinding machine, automatic cutting machine, printer, card sorting machine, food packing machine, other sliding parts on industrial machinery.
Check Stock

[2pcs/Pack] SIMAX3D 3D Printer Part CNC Linear Rail MGN12H 300mm Miniature Linear Rail Slide core xy BLV Ender 3 hotend Printer kit

  • Made of Bearing Steel , move smoothly without deflection high accuracy minimal wear and low noise..
  • Applied in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device..
  • It worked great and had no resistance in the bearings when put on a rail ease of mounting..
  • The system works beautifully for both slider motion as well as panning..
  • Package include:1PC MGN9C 200mm Linear rail guide ,1PC MGN9C block..
Check Stock

PAGOW Linear Actuator Mounting Brackets, Silver Heavy Duty Metal Mounting Brackets for Linear Actuator(2 PCS)

  • 180 Degree Rotation: The mounting bracket models allow for the linear actuator to rotate 180 degrees if necessary for your mounting application. This capability works great for applications where you will be pushing at an angle..
  • High Quality: The linear actuator mounting brackets are metal to provide the greatest strength possible, while remaining aesthetically pleasing..
  • Variety Applications: The mounting brackets are perfectly designed for a variety of applications across all industries. Such as boat hatch applications, custom topper hatches and basement trapdoors. They are designed to fit onto both ends of the linear actuator to ensure stability and precision in all applications..
  • These mounting brackets are designed to make the installation of the actuators much easier..
  • Package Included: You will receive 2 pieces of mounting brackets, 2 pieces of mounting bolts and 2 pieces of cotter pins..
Check Stock

XIAOSHI 2-Sets 8mm 100mm Case Hardened Plated Steel for Linear Motion Rods Shafts Guides

  • Linear Motion Shaft: /Diameter: 8mm /Length: 100mm /Material: Stainless Steel /Hardness: Surface hardness-55-60HRC.
  • Hardened layer-0.8mm /Surface treatment: Chrome Plated,Smoothness Ra0.8.
  • Horizontal Shaft Holder: /Material: Aluminum Alloy /Compatible Model: SHF 8A /Shaft Diameter: 8mm /Locking Bolt: M4 /Clamping Bolt: M5 /Dimensions: 43*10*5mm (W*L*T).
  • Linear Slide: /Material: Bearing steel /Slide Bush Method: LM8UU /Dynamic Basic Loading: 274CN /Static Basic Loading： 392CON /Dimensions: 34*30*22mm (W*L*F).
  • This linear motion shaft of 8 mm in diameter and in different Length is steel plated and case hardened, and is suitable for use with linear support blocks and closed Type slide units in linear motion applications..
  • Package Included: /2 x Linear Motion Shaft /4x Horizontal Shaft Holder /4x Linear Slide.
Check Stock