Reviews Linear Displacement Sensors

Cryorig H5 Universal CR-H5A Mid Tower CPU Heatsink with XT140 Fan for AMD/Intel

Proprietary Hive Fin System for airflow optimization, air turbulence reduction, added heat dissipation area, Jet Fin Acceleration System, and structural support..
Heatpipe Displacement Optimization allows for better and more evenly spread heat conduction on the fins compared to traditional linear alignment..
Jet Fin Acceleration System squeezes airflow and increases exhaust air speed. The increase of airflow speed in our Jet Fin Acceleration System allows heated air to leave the tower faster..
Heatpipe Convex-Align System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, and improved alignment with your CPU..
Includes one XT140 140mm PWM fan with our proprietary HPLN bearing for optimum airflow and noise ratio..

Proprietary Hive Fin System for airflow optimization, air turbulence reduction, added heat dissipation area, Jet Fin Acceleration System, and....
Heatpipe Displacement Optimization allows for better and more evenly spread heat conduction on the fins compared to traditional linear alignment..
Jet Fin Acceleration System squeezes airflow and increases exhaust air speed. The increase of airflow speed in our Jet Fin Acceleration System allows....

Motion sensor that uses sound waves to detect intruders. Unlike radar guns and infrared sensors that send out a linear beam to detect motion, the doppler radar detector emits pulses that provide a broader field of security coverage..
Radar Detector operates on 12VDC (power supply not included) and has a Normally Closed Circuit..
Application ideas: Residential and commercial security. Ideal for vacant building security..

GRANDLUMEN color changing stair lighting kit can improve safety and the aesthetics of your home.
When people walk up or down the stairs, the motion sensors will be triggered and the lights will cascade on upwards or downwards. The lights will also cascade off in the same direction after a while.
Due to the narrow detection angle, the motion sensor will not be triggered until you pass through the sensor- not beforehand. The sensors do not react to pets.
The wire harnesses and the linear stair lights contain quick connectors. With no specific skills required, the LED stair lighting kit can be up and running with minimal manual effort.
Built-in dusk-to-dawn photocell sensor. The lights will not be triggered when there is enough ambient light even if movement is detected. The daylight sensor sensitivity can be set.

12" Dual 4 ohm ID MAX V.4 Series Subwoofer | Pressed paper composite cone woofer | Parabolic EPDM rubber surround | Over 2" long linear excursion | RaDiaToR cooling system for heat dissipation | Radiant Diametric Torsional Reinforcement | High compliance suspension design | Flat spider with NOMEX cloth woven tinsel leads | High-temperature flat wire, flat wound voice coil | Inverted dust cap with logo | Powder coated alloy proprietary basket.
Power Handling: RMS: 1200 watts | Recommended Power Range: 300-1200 watts | 3-1/2" peak-to-peak surround excursion.
Nominal Impedance (IMP): Dual 4 Ω | DC Resistance (Re): 3.0 Ω | Resonance Frequency (Fs): 27.77 Hz | Equivalent Volume (Vas): 72.16 L | Electrical Q Factor (Qes): 0.73 | Mechanical Q Factor (Qms): 2.98 | Total Q Factor (Qts): 0.58.
Frequency response: 20-250 Hz | Peak Excursion (Xmax): 39 mm | Force Factor (BL): 16.68 Tm | Piston Area (Sd): 545.0 cm2 | Sensitivity: 85.20 dB 1w/1m.
Sealed Enclosure Suggestion: 1 cu.ft. | Ported Enclosure Suggestion: 1.75 cu.ft. | Displacement: 0.14 cu.ft. | Mounting Depth: 8.15 in | Outside Diameter: 12.40 in | Cutout: 11.02 in.

Features: Black Aluminum 3” voice coil former for superior heat dissipation, High Temperature Round-Wire CCAW voice coil with high-temp black adhesive, Double stitched surround, Heavy duty cast basket, Spring loaded terminals accept up to 8 gauge, Stitched-on double-XL tinsel leads, Rear vented pole piece, Rear drilled gap-venting, Innovative high-velocity cast aluminum vented frame spacer ring, Magnet ID shorting ring, Top-Plate Cooling Channels, Cast Aluminum surround bolt-on rings, Optimized.
Specifications: 1500 Watts RMS | Linear X-Max by 70% | Magnet Diameter: 8.66 in. | DC Resistance (Re): 3.8 Ω | Resonance Frequency (Fs): 48.5 Hz | Equivalent Volume (Vas): 8.3 L | Electrical Q Factor (Qes): 0.35 | Mechanical Q Factor (Qms): 3.20 | Total Q Factor (Qts): 0.32 | Force Factor (BL): 26.8 NA | Moving Mass (incl. Air Load) (Mms): 216.3 g | Suspension Compliance (Cms): 0.05 mm/N | Sensitivity: 86.2 dB 1w / 1m.
Box Recommendations: Sealed Enclosure Suggestion: 0.5 cu. ft. | Ported Enclosure Suggestion: 1.0 cu. ft. | Displacement: 0.21 cu. ft. | Depth: 7.007 in |Outside Diameter: 10.94 in | Cutout: 9.17 in | Recommended Tuning: 32 Hz | Recommended Port Area: 16 sq. in..

The fluke 116 digital multimeter features a built-in thermometer for HVAC applications.
Fluke 116 digital multimeter features micro amps to test flame sensors.
Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage.
Fluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on non linear signals.

X AXIS PRECISION MANUAL FINE-TUNING PLATFORM---Fine-tuning the sliding table, manual and precise adjustment of the registration, used for high-precision production and processing products. Micrometer level adjustment sliding table with an accuracy of 0.01mm..
SLIDING TABLE PARAMETERS---Micrometer displacement platform, stroke: ±12.5mm.
load resistance: 98.0N parallelism: 30um.
SLIDING TABLE SIZE---Sliding table surface size: 80x80mm.
overall appearance size: product external size: 165 * 92 * 24.5mm..
SLIDE TABLE MATERIAL---Aluminum alloy (black anodized), corrosion-resistant to ensure high precision.Sliding Table Sliding Method sliding track: linear guide rail.
APPLICATION---Laboratory precision testing, mechanical equipment positioning and movement, various fiber coupling, optical waveguide alignment, core alignment, packaging systems, capacitive touch screen production equipment, tooling fixtures, optical instrument devices, non-standard equipment..