Reviews Limit Current

Adjustable Voltage Regulator DC DROK Buck Boost Converter 6.0V-36V 9v 12v to DC 0.6-36V 24v 5A Power Supply Panel Constant Current Volt Step Up Down Module

  • Variable Power Supply --- input voltage range DC 6.0-36V, output voltage range DC 0.6-36V, max output current 5A, max output power 80W..
  • Easy to Use --- allows to set volts and limit the current, power on off and accurate voltage setting return after power down..
  • Application --- a compact and powerful, on the go variable power supply or LED driver.
  • Digital Display --- input or out voltage, current, temperature, power, electric capacity, electric quantity, running time, voltage and current curve,....
  • Memory Data --- 10 data groups of M0-M9 can be stored. Default will be stored in data group M0 and M1/M2 data group can be quickly called up..
Check Stock

Miniature Current Switch,Current Sensing Switch,with Rails,Normally Open Amp Sensor Monitoring Relay AC 0-30A Detectable（M3050）

  • Multi-Purpose: M3050 AC with rails current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-30A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
Check Stock

Dynamic Torque Sensor,DYN-200 100N.M Power Torsion Speed Torque Rotating Sensor Measuring Instrument,Torque Power Tester for Motor Speed Measurement

  • 【 COMES WITH DISPLAY】Can directly calculate the current power value.The sensor comes with display with a resolution of 128x64..
  • 【 HIGH ACCURACY】The accuracy achieves an accuracy of 1/1000 or more, and excellent zero-point stability.Non-contact, no maintenance, no wearing parts, no life limit..
  • 【SUPPORT】Support RS485 communication, support active upload protocol, communication rate up to 500 times per second .Support simultaneous output of transmission current and transmission voltage..
  • 【 OPERATIONS】Can perform simple calibration, clearing, filtering and other operations. Allow the sensor to be overloaded by 200%..
  • 【SUITABLE】Suitable for real-time display of the current measured torsion value and speed value..
Check Stock

MUSYSIC Professional 2 Channel 9000 Watts DJ PA Power Amplifier Signal out MU-P9K

  • Stereo Output Power: "2x5600W PEAK, 2x2800W Program, 2x1400W RMS @ 2Ω" "2x2800W PEAK, 2x1400W Program, 2x700W RMS @ 4Ω" "2x1400W PEAK, 2x700W Program, 2x350W RMS @ 8Ω".
  • Bridge Output Power: "5600W PEAK, 2800W Program, 1400W RMS @ 4Ω" "2800W PEAK, 1400W Program, 700W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Dual cooling fans / Connectors Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check Stock

uxcell a14061700ux0924 AC 125V 5A Hinge Lever Micro Limit Switch KW4-3Z-3 for Mill CNC Pack of 5

  • Level Size : 20 x 4mm/ 0.8" x 0.16"(L*W).
  • Switch Body Size : 2 x 1 x 0.7cm / 0.8" x 0.4" x 0.27"(L*W*H).
Check Stock

East Tester Benchtop Multimeter ET1240 4-1/2 Digit Digital Multimeter Voltage Tester

  • Using 3.5 inch TFT LCD display (resolution 320*480), the brightness of the screen can be adjusted. Language switching between Chinese and English. Two-parameter display can display two parameters of the same input signal..
  • Overrange display: 120% of range. Measurement of AC/DC Voltage, AC/DC Current and 2/4 Line Resistance. The maximum DC current is 10A and the maximum DC voltage is 1000V. External calibration function to support user self-calibration..
  • Periodic and frequency measurements, maximum frequency 20 MHZ. Capacitance measurement, maximum 10 mF. True RMS AC voltage and AC current measurements, bandwidth up to 100 kHz..
  • Optional manual or automatic range. Ten Mathematical Functions: MX+B, MAX, MIN, Average, dB, dBm, REL, Hold, Limit Comparison, Statistics. Supporting a variety of sensors: 10 thermocouples, 4 thermal resistors..
  • Built-in temperature sensor for cold-end compensation, support automatic and manual compensation. Data Memory Storage and Reading Function for Easy Viewing of Data Information. Supporting SCPI protocol and providing programming documentation..
Check Stock

Current Sensing Switch/Relay,AC Current Sensing Switch 0-200A Normally Open Current Sensor Monitoring Relay,Linkage PLC Signal,Overload Controller M3080）

  • Multi-Purpose: M3080 AC current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-200A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-200A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
  • ABS material: High-power MOS tube non-con....
Check Stock

Antrader 6PCS KW4-3Z-3 Micro Switch KW4 Limit Switch 3pin 5A 125V Hinge Lever DC N/O N/C Switches for Mill CNC

  • Package Content: 6 × Micro Limit Switch.
  • Hinge Lever Actuator, 1NO+1NC Contact Configuration..
  • Switch Body Size: 2 x 1 x 0.7cm / 0.8″ x 0.4″ x 0.27″(L*W*H).
  • This Limit Switch can be used in various mechanical to control the position of moving parts of machines and plant..
Check Stock

Current Switch, Self-Powered Current Sensing Switch SZC25-NO-AL-CH AC 0.5-50A Adjustable Normally Open Current Sensing Relay for Flash Buzzer Transformer Substation

  • ...CISION & STABLE PERFORMANCE】The product features high quality, high precision, stable performance and long service life. It has the advantages of high precision, more stable heart, and long service life. It is an ideal choice for automated industrial equipment and store monitoring..
  • 【WORKING PRINCIPLES】This AC current sensing switch is designed and manufactured to solve the AC current monitoring. It uses the principle of mutual inductance to sense the AC current through the AC, isolate the AC current, and output a normally closed switching signal to directly control various automated chemical equipment..
  • 【FAST RESPONSE & LED INDICATOR】The switch has no new limit, and the reaction speed reaches ms. The LED state indicator provides a convenient and intuitive representation of the operating status of the switch. Through-heart structure design, isolation withstand voltage up to 2000V..
  • 【SELF-POWERED SENSING SWITCH】Self-powered, no external power supply required, high-power MOS tube non-contact electronic switch. The operating current of 0.5-50A AC can be adjusted by the potentiometer..
  • 【WIDE APPLICATION】Widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street la....
Check Stock