Reviews Light Stabilizer Uv 783
Rectangle Sun Shade Sail with Led Light, 13 x 9 Feet UV Block Canopy Sunshades for Patio, Backyard, Christmas, Party, Garden, Playground Outdoor Facility Active
- ... comes with remote control with 8 light modes: flashing, waves, combination, sequential, slow glow, chasing, slow fade and steady on, wireless remote control with auto timer function (6 hours on, 18 hours off), easy to set up and bright, brightness adjustable.
- Multi Function Shade Sail: the sunshade is added with UV stabilizer, and the sunshade sail can prevent most of UV rays from passing through, and block the scorching sun heat at the same time.
- In addition to the sun protection function, it can also provide lighting function at night, better decorate your space and create a romantic atmosphere for you outdoor occasions, and is widely applied in courtyards, lawns, gardens, swimming pools, barbecue areas, ponds, decks or other outdoor occasions.
- Easy to Install and Use: please measure and clean the area where the sunshade sail is to be installed before installation.
- Leave a margin of 1.5-2 feet between the fixed point and the sunshade sail, tie 4 ropes to the 4 rings, and fix the other end of the rope to the accessible pole, tree or any frame.
- The rectangular sunshade is more convenient to install anywhere, provides a larger shading area in sunny days, and is not easy to accumulate water in rainy days.
Check StockSMALLRIG Adjustable Camera Monitor Mount with NATO Clamp for DJI RS 2 / RSC 2-3026
- 【FOR DJI RS 2/RSC 2】SmallRig Monitor Mount 3026 is specially designed for DJI RS 2/RSC 2 gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc..
- 【FIRM LOCKING】The monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling..
- 【165° TILT RANGE】SmallRig 3026 is adjustable for 165° and can be stopped at any angle without tools. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer..
- 【MULTIPLE MOUNTING OPTIONS】There are two 1/4"-20 threaded holes on top of the monitor mount, and one 1/4 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc..
- 【HIGH CUSTOMIZATION】Matte surface perfectly matches with the industrial design of stabilizer. ( Please note: the max payload is 1.5kg. ).
Check StockPSE Archery Night Hawk Traditional Takedown Recreational Shooting Recurve Bow Right 62 - 50
- CRAFTED FROM HARDWOOD - Constructed from hand-selected woods for an eye-catching look and great performance.
- RELIABLE STABILIZER – The built-in stabilizer of the recurve bow helps minimize vibrations, minimize shock and produce less noise.
- STABILIZER BUSHING – The stabilizer bushing offers dependability in the field and provide enhanced performance.
- TOOL-LESS ASSEMBLY - This is a tool-less takedown bow which you can assemble in under 2-3 minutes and change limbs without remembering where you put....
- A GOOD CHOICE FOR A BEGINNER - You find this is an easy bow to shoot, very light and durable.
- it’s great to do some target shooting with and to get....
Check StockNew brothread Tear Away Machine Embroidery Stabilizer Backing 8"x8" - 100 Precut Sheets - Medium Weight 1.8 oz- Fits 4x4 and 6x6 Hoops
- ▶TEMPORARY STABILIZER: It provides temporary support for embroidery projects. They are best used on firmly woven fabrics and fabrics made from natural fibers. Our tear away embroidery stabilizer can be torn away easily yet provides adequate stability..
- ▶WIDE APPLICATIONS: Best used on natural fibers, thicker and softer fabrics. Great for hoop embroidery, applique, thread stretching, computerized lace embroidery and decorative stitch sewing..
- ▶SKIN-FRIENDLY MATERIAL: 100% first-class Polyester which is acid and lead free! No any itching worries even you use our tear away embroidery stabilizer on your skin-touch clothes..
- ▶EASY TO USE: Hoop the tear away embroidery stabilizer together with the fabric, then stitch. After finishing your project, just tear the stabilizer away easily and clean in either horizontal or vertical directions around the stitches..
- ▶MEDIUM WEIGHT FOR ALL THE STITCH DENSITY (COUNTS): It is medium weight 1.8 oz (50 Grams) tear away embroidery stabilizer for light to medium stitch density, for much denser designs, you can use more than one layer..
Check StockCut Away Embroidery Stabilizer Backing (10in x 50yd), Seneme Stabilizer for Embroidery - Medium Weight 2.5oz Cutaway Embroidery Stabilizers - for Machine Embroidery Stabilizer and Hand Sewing
- √High Quality Stabilizer: Behind every perfectly embroidered piece is a reliable embroidery stabilizers. It is a permanent stabilizer will remain forever affixed to the embroidery and will provide permanent support for the design, It works best with thick and soft cloth and also with natural fibers..
- √Wide Applications: It is medium weight 2.5oz (70 Grams) cut away embroidery stabilizer for light to medium stitch density, Best used on knits, fleece, denim and for fabric that is unstable, moves or distorts when tugged on. Great for hoop embroidery, applique, thread stretching, home quilts, computerized lace embroidery and decorative stitch sewing..
- √Safe on Skin: This accompaniment to the embroidery hoop is polyester fabric. No any itching worries even you use our cutaway embroidery stabilizer on your skin-touch clothes. This stabilizer sheet is a good choice for knit fabrics to prevent designs from stretching due to frequent wash and wear..
- √Easy to Use: Hoop the cut away embroidery stabilizer together with the fabric, then stitch. After finishing your project, just roughly cut the excess stabilizer from the fabric. Then using sharp scissor to trim close to the stitches. We offer rolls of the 8" x 50yd, 10" x 50yd and 12" x 50yd type that can cu....
Check StockNew brothread Cut Away Machine Embroidery Stabilizer Backing 8"x8" - 100 Precut Sheets - Medium Weight 2.5 Ounce - Fits 4x4 and 6x6 Hoops
- ▶PERMANENT STABILIZER: It is a permanent stabilizer will remain forever affixed to the embroidery and will provide permanent support for the design, it also helps retain the design's shape after repeated washing..
- ▶WIDE APPLICATIONS: Best used on knits, fleece, denim and for fabric that is unstable, moves or distorts when tugged on. Great for hoop embroidery, applique, thread stretching, computerized lace embroidery and decorative stitch sewing..
- ▶SKIN-FRIENDLY MATERIAL: 100% first-class Polyester which is acid and lead free! No any itching worries even you use our cut away embroidery stabilizer on your skin-touch clothes..
- ▶EASY TO USE: Hoop the cut away embroidery stabilizer together with the fabric, then stitch. After finishing your project, just roughly cut the excess stabilizer from the fabric. Then using sharp scissor to trim close to the stitches..
- ▶MEDIUM WEIGHT FOR ALL THE STITCH DENSITY (COUNTS): It is medium weight 2.5oz (70 Grams) cut away embroidery stabilizer for light to medium stitch density, for much denser designs, you can use more than one layer..
Check StockCanon EF-S 17-55mm f/2.8 IS USM Lens for Canon DSLR Cameras and Amazon Basics UV Protection Lens Filter - 77 mm
- 17-55mm wide-angle zoom lens with f/2.8 maximum aperture for Canon DSLR cameras.
- AD and aspherical elements deliver impressive image quality through entire zoom range, Closest focusing distance : 1.15 feet.
- Image Stabilizer lens groups shift to compensate for image shake even in dim lighting.
- UV protection filter for general, everyday use.
- Protects lens from dust, dirt, and scratches.
Check StockFeiyuTech Vimble 2S-Official Gyro 3-Axis Gimbal Stabilizer for Smartphone iPhone 12 11 XR Cellphone Phone Gimbal Stabilizer Selfie Stick Handheld Extend 7.1 Timelapse Face Object Track Dolly Zoom
- Impressive video or image is generally believed taken by photographer with camera. Now your cell phone with 3 axis gimbal stabilizer for smartphone....
- STABILIZER SELF STICK: Built in 7.1'' extension pole can provide much larger space to make the video/image in more perspectives simply. No need to....
- ALL FOLLOW MODE PHONE GIMBAL STABILIZER: All follow mode is added to realize 360° dead angle free transformation and easier rotation follow.Even the....
- CELLPHONE STABILIZER WITH PROFESSIONAL APP: You can easily realize Hitchcock Dolly Zoom,Overlap Image, Light Rail Image/Video, Different Panoroma....
- PHONE IPHONE GIMBAL STABILIZER COMPATIBILITY:Compatible with iPhone 12/11, 12/11 Pro(Not for 12/11 Pro Max), X, XS,XS MAX,XR,8,8 Plus, 7, 7 Plus, 6, 6....
Check StockCruiser Accessories 62702 Vault License Plate Frame/Shield, Black/Smoke
- Designed in the USA - Includes easy snap on/off shield - mounting plate - frame insert - Polycarbonate shield Combo that enhances the look of the license plate and protects from elements and theft.
- Shield is made of Polycarbonate with a UV resistant stabilizer to prevent discoloration.
- The frame insert is made of durable ABS plastic.
- Includes 4 components: unbreakable UV Polycarbonate shield, mounting plate, frame insert, hardware.
Check Stock