Ceiling Nailer Fully Automatic Nailing Woodworking Decoration Integration for Light Steel Keel, Steel Plate, Concrete, Bridge, Anti-theft (A9, Handheld)

  • ...ed design, built-in noise reduction, external sound insulation.
  • after the nail is fired, the sound comes out of the silencer hole and is absorbed by multiple silencers to achieve the ultimate silencer effect..
  • 【Adjustable power:】 4 blocks of adjustable power. Can hit 1 cm thick steel plate.
  • can hit C20-C70 grade concrete. It contains five poles and has a total length of 3.4m.
  • it can be used for 5.5m high floor slabs..
  • 【Automatic slag discharge:】 Comes with diversion groove, no need to disassemble and clean dust after finishing. After the integrated nail is excited, the shock wave discharges the residue from the muffler hole through the laminar flow groove and finally from the slag exhaust hole..
  • 【Material:】 High-strength steel is used to prevent corrosion and wear. The high-quality military materials are only used for military special technologies to ensure 100% firing and life expectancy of more than 20,000 times..
  • 【Scope of application:】 light steel keel, steel plate, concrete, wood, support installation, bridge, monitoring, anti-theft network, etc. 1 block is suitable for high-standard concrete.
  • 2 block is suitable for ordinary cement board.
  • 3 block is suitable for ordinary brick wall.
  • 4 block is suitable for wooden soft base..
Check Stock

AMES BWRF5 Water Base High Strength Elastomeric Liquid Rubber, 5 Gallon White

  • Ames’ Block & Wall Liquid Rubber is a specially formulated blend of adhesive, high strength elastomeric, liquid rubber for waterproofing concrete walls, cinder block, and more..
  • Ames Block & Wall Liquid Rubber is an excellent coating for ICF (insulated concrete forms), metal, wood, concrete, and many other surfaces..
  • Block & Wall Liquid Rubber Waterproofer will fill cracks and crevices up to ⅛ inch. Block & Wall is thick, yet easy to apply and has up to 1800% elongation. Low odor and can be sprayed, rolled or brushed applied..
  • Ames Block & Wall Liquid Rubber is non-toxic, low odor, environmentally friendly, and made in the USA.
  • 5 Gallon, White – Ames Block & Wall is packaged in 5 gallon pails – It is high in solids and dries to a nearly impenetrable tough elastic membrane that is up to 1800% elongation to resist cracking and peeling..
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
Check Stock

Goldblatt 3 Pieces Drywall Trowel, Carbon Steel Finishing Masonry Trowel Set Includes 14'' x 4'', 12'' x 4'', 8'' x 3'', Lightweight Wood Handle, Plastering Trowel for Sheetrock Wallboard Plasterboard

  • Sandblasting finish for antirust, strong and durable. Carbon steel anti-rust performance is slightly lower than stainless steel, PLEASE keep the trowel dry after use.
  • [Flat Blades & Square End Type] Flat blade makes applications easier with more consistent finish. Beveled working blade edges prevent aggregate popping, can be used for application, smoothing, polishing and shining.
  • [Ergonomics Handle] No-turn handle design, ergonomic, camel-back wood handle makes them comfortable to use for less hand fatigue. Strong aluminum mounting securely welding with blades for long lifespan.
  • [Size Include] 3 Pieces concrete finishing trowels set includes 14’’ x 4’’, 12’’ x 4’’ & 8’’ x 3’’ different sizes, meet your different using requirement, will make your lives on the installation job easier, more efficient and more profitable.
  • [Professional Grade] The Goldblatt Concrete Finishing Trowels are an excellent choice for concrete hand work. Classically styled with a traditional camel-back wood handle, this trowel has been the industry standard for decades, will last for years to come.
Check Stock

Haws 3150"Hi-Lo" Barrier-Free Concrete Pedestal Drinking Fountain with Exposed Aggregate Finish

  • Adjustable design allows the arm to be mounted at adult or child height as required by ADA.
  • Vibra-cast concrete with wire reinforcement and exposed aggregate finish offers an extremely solid and highly protected fountain.
  • Maintenance is made easy with front access to valve adjustment and cartridge replacement.
  • hood extension protects the bubbler head with a partial enclosure, for a greater protected drinking point.
  • Simplistic Portland gray cement creates just the right amount of appeal for an outdoor fountain.
Check Stock

Decorative Concrete Stain. Industrial-Quality. Eco-Friendly and Deep Penetrating. 20 Colors. Samples, How-to Videos and Customer Service Available. Indoor/Outdoor Use. (1/2 gal, Antique Gray)

  • ORDER SAMPLE FIRST to test color & surface porosity. Products CANNOT be returned once opened. Color intensifies when more is used – average 400 sq ft per gal..
  • Apply to DAMP, porous concrete. Professional-Grade. UV stable. Easy to Use. Do project in one day! Some people only use the stains, but for best results (since concrete varies) - ETCH, STAIN, SEAL..
  • Follow instructions - apply to DAMP concrete. (Some bad Reviews exist because Stains were not applied to DAMP CONCRETE.) Be aware that LIGHT COLORS will not dramatically change concrete color. TEST SAMPLE FIRST..
  • Stains work best on concrete – not very porous brick or block. Test Sample. Not meant for “tight” surfaces that can't be etched, such as concrete countertops, rock, granite, or slate..
  • Questions? Email us at [email protected]. Proudly MADE IN USA..
Check Stock

14\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry 12mm Segment Height

  • MULTIPURPOSE - 14" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind..
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone. Not recommended for reinforced concrete and asphalt and green concrete..
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

Erie Tools 14\ Stainless Steel Hot and Cold Pressure Washer Surface Cleaner with Wheels No Handle 4000 PSI 4 GPM

  • Erie Tools 14-inch stainless steel flat-surface cleaner pressure washer attachment is designed to clean large, flat surfaces.
  • Maximum water temperature of 210 Degrees F, making it ideal for hot- or cold-water applications.
  • Versatile cleaner with wheels will tackle most surfaces with ease including aggregate, stamped concrete, and other textured flat surfaces.
  • Stainless steel housing is built to withstand the toughest abuse for a long operating life.
  • Cleaner has a 1/4-inch Quick Connect inlet for use with any standard wand and trigger gun.
Check Stock